Professional Documents
Culture Documents
M95320 M95320-W M95320-R M95640 M95640-W M95640-R: 32 Kbit and 64 Kbit Serial Spi Bus Eeproms With High Speed Clock
M95320 M95320-W M95320-R M95640 M95640-W M95640-R: 32 Kbit and 64 Kbit Serial Spi Bus Eeproms With High Speed Clock
Feature summary
■ Compatible with SPI Bus Serial Interface
(Positive Clock SPI Modes)
■ Single Supply Voltage:
– 4.5 to 5.5V for M95320 and M95640
– 2.5 to 5.5V for M95320-W and M95320-W
– 1.8 to 5.5V for M95320-R and M95640-R SO8 (MN)
150 mil width
■ 10MHz, 5MHz or 2MHz clock rates
■ 5ms or 10ms Write Time
■ Status Register
■ Hardware Protection of the Status Register
■ Byte and Page Write (up to 32 Bytes)
TSSOP8 (DW)
■ Self-Timed Programming Cycle 169 mil width
■ Adjustable Size Read-Only EEPROM Area
■ Enhanced ESD Protection
■ More than 1 million Write cycles
■ More than 40-Year Data Retention
MLP8 (MB)
■ Packages 2x3 mm
– ECOPACK® (RoHS compliant)
Contents
1 Summary description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2 Signal description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.0.1 Serial Data Output (Q) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.0.2 Serial Data Input (D) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.0.3 Serial Clock (C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.0.4 Chip Select (S) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.0.5 Hold (HOLD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.0.6 Write Protect (W) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4 Operating features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.1 Supply voltage (VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.1.1 Operating supply voltage VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.1.2 Power-up conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.1.3 Internal device Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.1.4 Power-down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.2 Active Power and Standby Power modes . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.2.1 Hold condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.3 Status Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.4 Data protection and protocol control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
5 Memory organization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
6 Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
6.1 Write Enable (WREN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
6.2 Write Disable (WRDI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
6.3 Read Status Register (RDSR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
6.3.1 WIP bit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
6.3.2 WEL bit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
6.3.3 BP1, BP0 bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
6.3.4 SRWD bit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2/44
M95320, M95640, M95320-x, M95640-x Contents
8 Maximum rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
9 DC and AC parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
10 Package mechanical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
11 Part numbering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
12 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
3/44
List of tables M95320, M95640, M95320-x, M95640-x
List of tables
4/44
M95320, M95640, M95320-x, M95640-x List of figures
List of figures
5/44
Summary description M95320, M95640, M95320-x, M95640-x
1 Summary description
D Q
S M95xxx
HOLD
VSS
AI01789C
S 1 8 VCC
Q 2 7 HOLD
W 3 6 C
VSS 4 5 D
AI01790D
1. See Package mechanical section for package dimensions and how to identify pin-1.
6/44
M95320, M95640, M95320-x, M95640-x Summary description
7/44
Signal description M95320, M95640, M95320-x, M95640-x
2 Signal description
During all operations, VCC must be held stable and within the specified valid range:
VCC(min) to VCC(max).
All of the input and output signals must be held High or Low (according to voltages of VIH,
VOH, VIL or VOL, as specified in Table 13 to Table 17). These signals are described next.
8/44
M95320, M95640, M95320-x, M95640-x Connecting to the SPI bus
VSS
VCC
R(2)
SDO
SPI Interface with
SDI
(CPOL, CPHA) =
(0, 0) or (1, 1) SCK
AI12836
1. The Write Protect (W) and Hold (HOLD) signals should be driven, High or Low as appropriate.
2. These pull-up resistors, R, ensure that the memory devices are not selected if the Bus Master leaves the S line in the high-
impedance state. As the Bus Master may enter a state where all inputs/outputs are in high impedance at the same time
(e.g.: when the Bus Master is reset), the clock line (C) must be connected to an external pull-down resistor so that, when all
inputs/outputs become high impedance, S is pulled High while C is pulled Low (thus ensuring that S and C do not become
High at the same time, and so, that the tSHCH requirement is met).
9/44
Connecting to the SPI bus M95320, M95640, M95320-x, M95640-x
CPOL CPHA
0 0 C
1 1 C
D MSB
Q MSB
AI01438B
10/44
M95320, M95640, M95320-x, M95640-x Operating features
4 Operating features
11/44
Operating features M95320, M95640, M95320-x, M95640-x
4.1.4 Power-down
At Power-down (continuous decrease of VCC), as soon as VCC drops from the normal
operating voltage to below the Power On Reset threshold voltage, the device stops
responding to any instruction sent to it.
During Power-down, the device must be deselected and in Standby Power mode (that is
there should be no internal Write cycle in progress). Chip Select (S) should be allowed to
follow the voltage applied on VCC.
HOLD
Hold Hold
Condition Condition
AI02029D
12/44
M95320, M95640, M95320-x, M95640-x Operating features
13/44
Memory organization M95320, M95640, M95320-x, M95640-x
5 Memory organization
HOLD
High Voltage
W Control Logic Generator
S
D
I/O Shift Register
Q
Status
Register Size of the
Read only
EEPROM
area
Y Decoder
1 Page
X Decoder
AI01272C
14/44
M95320, M95640, M95320-x, M95640-x Instructions
6 Instructions
0 1 2 3 4 5 6 7
Instruction
High Impedance
Q
AI02281E
15/44
Instructions M95320, M95640, M95320-x, M95640-x
0 1 2 3 4 5 6 7
Instruction
High Impedance
Q
AI03750D
16/44
M95320, M95640, M95320-x, M95640-x Instructions
17/44
Instructions M95320, M95640, M95320-x, M95640-x
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Instruction
MSB MSB
AI02031E
18/44
M95320, M95640, M95320-x, M95640-x Instructions
19/44
Instructions M95320, M95640, M95320-x, M95640-x
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Instruction Status
Register In
D 7 6 5 4 3 2 1 0
20/44
M95320, M95640, M95320-x, M95640-x Instructions
0 1 2 3 4 5 6 7 8 9 10 20 21 22 23 24 25 26 27 28 29 30 31
D 15 14 13 3 2 1 0
MSB
Data Out 1 Data Out 2
High Impedance
Q 7 6 5 4 3 2 1 0 7
MSB
AI01793D
1. Depending on the memory size, as shown in Table 6, the most significant address bits are Don’t Care.
21/44
Instructions M95320, M95640, M95320-x, M95640-x
0 1 2 3 4 5 6 7 8 9 10 20 21 22 23 24 25 26 27 28 29 30 31
D 15 14 13 3 2 1 0 7 6 5 4 3 2 1 0
High Impedance
Q
AI01795D
1. Depending on the memory size, as shown in Table 6, the most significant address bits are Don’t Care.
22/44
M95320, M95640, M95320-x, M95640-x Instructions
0 1 2 3 4 5 6 7 8 9 10 20 21 22 23 24 25 26 27 28 29 30 31
D 15 14 13 3 2 1 0 7 6 5 4 3 2 1 0
32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
D 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 6 5 4 3 2 1 0
AI01796D
1. Depending on the memory size, as shown in Table 6, the most significant address bits are Don’t Care.
23/44
Power-up and delivery state M95320, M95640, M95320-x, M95640-x
24/44
M95320, M95640, M95320-x, M95640-x Maximum rating
8 Maximum rating
Stressing the device outside the ratings listed in Table 7 may cause permanent damage to
the device. These are stress ratings only, and operation of the device at these, or any other
conditions outside those indicated in the Operating sections of this specification, is not
implied. Exposure to Absolute Maximum Rating conditions for extended periods may affect
device reliability. Refer also to the STMicroelectronics SURE Program and other relevant
quality documents.
25/44
DC and AC parameters M95320, M95640, M95320-x, M95640-x
9 DC and AC parameters
This section summarizes the operating and measurement conditions, and the DC and AC
characteristics of the device. The parameters in the DC and AC Characteristic tables that
follow are derived from tests performed under the Measurement Conditions summarized in
the relevant tables. Designers should check that the operating conditions in their circuit
match the measurement conditions when relying on the quoted parameters.
CL Load Capacitance 30 pF
Input Rise and Fall Times 50 ns
Input Pulse Voltages 0.2VCC to 0.8VCC V
Input and Output Timing Reference Voltages 0.3VCC to 0.7VCC V
1. Output Hi-Z is defined as the point where data out is no longer driven.
0.3VCC
0.2VCC
AI00825B
26/44
M95320, M95640, M95320-x, M95640-x DC and AC parameters
27/44
DC and AC parameters M95320, M95640, M95320-x, M95640-x
28/44
M95320, M95640, M95320-x, M95640-x DC and AC parameters
29/44
DC and AC parameters M95320, M95640, M95320-x, M95640-x
30/44
M95320, M95640, M95320-x, M95640-x DC and AC parameters
31/44
DC and AC parameters M95320, M95640, M95320-x, M95640-x
Current
New Product
Product
Version(2)
Symbol Alt. Parameter Version(1) Unit
32/44
M95320, M95640, M95320-x, M95640-x DC and AC parameters
33/44
DC and AC parameters M95320, M95640, M95320-x, M95640-x
34/44
M95320, M95640, M95320-x, M95640-x DC and AC parameters
35/44
DC and AC parameters M95320, M95640, M95320-x, M95640-x
tSHSL
tDVCH tCHCL
tCHDX tCLCH
D MSB IN LSB IN
High Impedance
Q
AI01447C
tHLCH
tCLHL tHHCH
tCLHH
tHLQZ tHHQV
HOLD
AI01448B
36/44
M95320, M95640, M95320-x, M95640-x DC and AC parameters
tCH
tCLQX tCLQX
Q LSB OUT
tQLQH
tQHQL
ADDR.
D LSB IN
AI01449e
37/44
Package mechanical M95320, M95640, M95320-x, M95640-x
10 Package mechanical
Figure 18. SO8N – 8 lead Plastic Small Outline, 150 mils body width, package outline
h x 45˚
A2 A
c
ccc
b
e
0.25 mm
D GAUGE PLANE
k
8
E1 E
1 L
A1
L1
SO-A
Table 24. SO8N – 8 lead Plastic Small Outline, 150 mils body width, package
mechanical data
millimeters inches
Symbol
Typ Min Max Typ Min Max
A 1.75 0.069
A1 0.10 0.25 0.004 0.010
A2 1.25 0.049
b 0.28 0.48 0.011 0.019
c 0.17 0.23 0.007 0.009
ccc 0.10 0.004
D 4.90 4.80 5.00 0.193 0.189 0.197
E 6.00 5.80 6.20 0.236 0.228 0.244
E1 3.90 3.80 4.00 0.154 0.150 0.157
e 1.27 – – 0.050 – –
h 0.25 0.50 0.010 0.020
k 0° 8° 0° 8°
L 0.40 1.27 0.016 0.050
L1 1.04 0.041
38/44
M95320, M95640, M95320-x, M95640-x Package mechanical
Figure 19. TSSOP8 – 8 lead Thin Shrink Small Outline, package outline
D
8 5
c
E1 E
1 4
A1 L
A A2
CP L1
b e
TSSOP8AM
Table 25. TSSOP8 – 8 lead Thin Shrink Small Outline, package mechanical data
millimeters inches
Symbol
Typ. Min. Max. Typ. Min. Max.
A 1.200 0.0472
A1 0.050 0.150 0.0020 0.0059
A2 1.000 0.800 1.050 0.0394 0.0315 0.0413
b 0.190 0.300 0.0075 0.0118
c 0.090 0.200 0.0035 0.0079
CP 0.100 0.0039
D 3.000 2.900 3.100 0.1181 0.1142 0.1220
e 0.650 – – 0.0256 – –
E 6.400 6.200 6.600 0.2520 0.2441 0.2598
E1 4.400 4.300 4.500 0.1732 0.1693 0.1772
L 0.600 0.450 0.750 0.0236 0.0177 0.0295
L1 1.000 0.0394
α 0° 8° 0° 8°
39/44
Package mechanical M95320, M95640, M95320-x, M95640-x
Figure 20. MLP8 - 8-lead Ultra thin Fine pitch Dual Flat No Lead, package outline
D e b
L1
L3
E E2
L
A
D2
ddd
A1
UFDFPN-01
Table 26. MLP8 - 8-lead Ultra thin Fine pitch Dual Flat No Lead, package
mechanical data
millimeters inches
Symbol
Typ Min Max Typ Min Max
40/44
M95320, M95640, M95320-x, M95640-x Part numbering
11 Part numbering
Example: M95640 – W MN 6 T P /B
Device Type
M95 = SPI serial access EEPROM
Device Function
640 = 64 Kbit (8192 x 8)
320 = 32 Kbit (4096 x 8)
Operating Voltage
blank = VCC = 4.5 to 5.5V
W = VCC = 2.5 to 5.5V
R = VCC = 1.8 to 5.5V
Package
MN = SO8 (150 mil width)
DW = TSSOP8 (169 mil width)
MB = MLP8 (2x3 mm)
Device Grade
6 = Industrial temperature range, –40 to 85 °C.
Device tested with standard test flow
3 = Device tested with High Reliability Certified Flow(1)Automotive
temperature range (–40 to 125 °C)
Option
blank = Standard Packing
T = Tape and Reel Packing
Plating Technology
blank = Standard SnPb plating
P or G = ECOPACK (RoHS compliant)
Process letter(2)
/B = DP26% Rsst
/P = DP26% Chartered
1. ST strongly recommends the use of the Automotive Grade devices for use in an automotive environment.
The High Reliability Certified Flow (HRCF) is described in the quality note QNEE9801. Please ask your
nearest ST sales office for a copy.
2. The Process letter only concerns Grade-3 devices.
For a list of available options (speed, package, etc.) or for further information on any aspect
of this device, please contact your nearest ST Sales Office.
The category of second-Level Interconnect is marked on the package and on the inner box
label, in compliance with JEDEC Standard JESD97. The maximum ratings related to
soldering conditions are also marked on the inner box label.
41/44
Revision history M95320, M95640, M95320-x, M95640-x
12 Revision history
Human Body Model meets JEDEC std (Table 2). Minor adjustments on pp
13-Jul-2000 1.2 1,11,15. New clause on p7. Addition of TSSOP8 package on pp 1, 2,
Ordering Info, Mechanical Data
Test condition added ILI and ILO, and specification of tDLDH and tDHDL
removed.
tCLCH, tCHCL, tDLDH and tDHDL changed to 50ns for the -V range.
“-V” Voltage range changed to “2.7V to 3.6V” throughout.
16-Mar-2001 1.3
Maximum lead soldering time and temperature conditions updated.
Instruction sequence illustrations updated.
“Bus Master and Memory Devices on the SPI bus” illustration updated.
Package Mechanical data updated
19-Jul-2001 1.4 M95160 and M95080 devices removed to their own data sheet
Endurance increased to 1M write/erase cycles
06-Dec-2001 1.5
Instruction sequence illustrations updated
18-Dec-2001 2.0 Document reformatted using the new template. No parameters changed.
Announcement made of planned upgrade to 10MHz clock for the 5V, –40
08-Feb-2002 2.1 to 85°C, range.
Endurance set to 100K write/erase cycles
10MHz, 5MHz, 2MHz clock; 5ms, 10ms Write Time; 100K, 1M erase/write
18-Dec-2002 2.2 cycles distinguished on front page, and in the DC and AC Characteristics
tables
Process indentification letter corrected in footnote to AC Characteristics
26-Mar-2003 2.3
table for temp. range 3
-S voltage range upgraded by removing it and inserting -R voltage range
26-Jun-2003 2.4
in its place
15-Oct-2003 3.0 Table of contents, and Pb-free options added. VIL(min) improved to -0.45V
21-Nov-2003 3.1 VI(min) and VO(min) corrected (improved) to -0.45V
28-Jan-2004 4.0 TSSOP8 connections added to DIP and SO connections
42/44
M95320, M95640, M95320-x, M95640-x Revision history
M95320-S and M95640-S root part numbers (1.65 to 5.5V Supply) and
related characteristics added.
20MHz Clock rate added.TSSOP14 package removed and MLP8 package
added.
Description of Power On Reset: VCC Lock-Out Write Protect updated.
24-May-2005 5.0 Product List summary table added. Absolute Maximum Ratings for
VIO(min) and VCC(min) improved. Soldering temperature information
clarified for RoHS compliant devices. Device Grade 3 clarified, with
reference to HRCF and automotive environments. AEC-Q100-002
compliance. tCHHL(min) and tCHHH(min) is tCH for products under “S”
process. tHHQX corrected to tHHQV.
Figure 16: Hold timing updated.
Document converted to new ST template.
Packages are ECOPACK® compliant. PDIP package removed.
SO8N package specifications updated (see Table 24 and Figure 18).
M95640-S and M95320-S part numbers removed (DC and AC parameters
updated accordingly).
How to identify previous, current and new products by the Process
identification letter Table removed.
Figure 4: SPI modes supported updated and Note 2 added. First three
paragraphs of Section 4: Operating features replaced by Section 4.1:
07-Jul-2006 6
Supply voltage (VCC).
TA added to Table 7: Absolute maximum ratings. ICC and ICC1 updated in
Table 13, Table 14, Table 15 and Table 17. VOL and VOH updated in
Table 15. ICC updated in Table 16. Data in Table 17 is no longer
preliminary.
tCH updated in Table 20. Table 23: AC characteristics (M95640-R) added.
Timing line of tSHQZ modified in Figure 17: Output timing.
Process letter added to Table 27: Ordering information scheme, Note 2
removed. Note 2 removed from Figure 2.
43/44
M95320, M95640, M95320-x, M95640-x
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
44/44