Professional Documents
Culture Documents
Installation &
License Activation
Guide
Disclaimer
Geometric Limited makes no warranties, either expressed or implied with respect to
this manual. Geometric Limited reserves the right to revise and improve products as
it sees fit, and to revise the specifications and information contained herein without
prior notice. Due to continuing product development, specifications and capabilities
described in this manual are subject to change without notice.
Trademarks
The following and other product names and corporate references herein are registered
or proprietary trademarks of their respective owners.
CAMWorks® is a registered trademark of Geometric Ltd.
SOLIDWORKS® is a registered trademark of Dassault Systèmes SolidWorks Corp.
Microsoft®, Windows®, Window 7®, Windows 8.1® and Windows 10® are
registered trademarks of Microsoft Corporation in the United States and/or other
countries.
All other brands and names are the property of their respective owners.
TABLE OF CONTENTS
1. CAMWorks Nesting: Introduction 6
CAMWorks 6
Machining Modules available in CAMWorks........................................................ 6
Purchasing CAMWorks Machining Modules ........................................................ 6
What is CAMWorks Nesting? 7
Purchasing the license for CAMWorks Nesting ................................................... 7
Scope of this manual 7
Getting Help/Troubleshooting 7
User Guide & Tutorials for CAMWorks Nesting ................................................... 7
Help Documentation for CAMWorks Nesting ....................................................... 8
CAMWorks Nesting Support................................................................................ 8
2. System Requirements 9
System Requirements 9
Supported Solid Modeler ..................................................................................... 9
Supported Microsoft Windows® Operating Systems ........................................... 9
Network ............................................................................................................... 9
Hardware ........................................................................................................... 10
Software Requirements 10
SOLIDWORKS ® or CAMWorks Solids .............................................................. 10
CAMWorks License Manager ............................................................................ 10
Hardware Dongle License Driver (Sentinel Driver 7.6.6) ................................... 10
Adobe Reader ................................................................................................... 10
Table of Contents i
Installation & License Activation Guide
ii Table of Contents
Installation & License Activation Guide
11. Troubleshooting 58
Topics covered .................................................................................................. 58
Valid License not detected 58
Basic Troubleshooting 58
Where to download the latest CAMWorks Nesting updates and installers from 59
What to do if the Troubleshooting Manual doesn’t solve your problem 60
CAMWorks
CAMWorks, developed by Geometric Americas, Inc., is a fully integrated
computer-aided manufacturing (CAM) solution designed to operate within
SOLIDWORKS (CAD application). It is an intuitive feature-based CAM solution
that helps manufacturers increase productivity and profitability through best-
in-class technologies and adaptable automation tools that maximize machining
efficiencies, and are yet simple to use.
Getting Help/Troubleshooting
User Guide & Tutorials for CAMWorks Nesting
After installation, the User Guide & Tutorials PDF Help document for CAMWorks
Nesting can be accessed from the Windows Start menu by selecting
All Programs>>CAMWorksNesting 201x>>User Guide & Tutorials
The hands-on approach of the tutorials in this manual illustrates how to use
the CAMWorks Nesting application. The scope of this manual covers all the
major features and functions of CAMWorks Nesting.
We recommend to our users to read this manual to gain a thorough
understanding of how to use the CAMWorks Nesting application.
2. SYSTEM REQUIREMENTS
This chapter details the system requirements (both hardware and software) for
the CAMWorks Nesting application and associated utilities.
Before installing CAMWorks Nesting, you need to ensure that the following
system requirements are fulfilled.
System Requirements
Supported Solid Modeler
CAMWorks Nesting works as an Add-in in the Solid modeler environment of
SOLIDWORKS and CAMWorks Solids.
For CAMWorks Nesting 2015 (64-bit):
- SOLIDWORKS 2015, CAMWorks Solids 2015
- SOLIDWORKS 2016, CAMWorks Solids 2016
Note: CAMWorks Nesting 2015 does not support any 32-bit Windows Operating
System.
Home editions of Windows OS are not supported.
Network
Microsoft's Windows Networking and Active Directory network environments in
case you install a floating license for CAMWorks Nesting.
Note: Novell networks and non-Windows based network storage devices are neither
tested nor recommended.
For floating network licenses, do not designate Virtual machines as the
server.
System Requirements 9
Installation & License Activation Guide
Hardware
Platform: Intel® and AMD® processors.
Note: Intel® Pentium® 3, AMD Athlon™ and Athlon XP CPU's are not
supported.
Software Requirements
SOLIDWORKS ® or CAMWorks Solids
CAMWorks runs as an Add-in within the Solid modeler environment of
SOLIDWORKS ® or CAMWorks Solids. Refer to the first page of this chapter for
the list of supported solid modelers.
Adobe Reader
The CAMWorks Nesting Help Manuals are in PDF format. The Adobe Reader
application is necessary to view, read, navigate, search and print the
CAMWorks Nesting manuals. If you do not have the Adobe Reader installed, you
can download it from the Adobe web site: www.adobe.com.
After CAMWorks Nesting is installed, select Start on the Windows task bar and
select All Programs>>CAMWorks Nesting 201x and select the desired manual for
viewing.
10 System Requirements
Installation & License Activation Guide
CAMWorks DVD Setup indicating the Supported Solid Modelers detected on the system
4. After successfully logging in, the Downloads Area page will be displayed.
Click on the link for CAMWorks Nesting Files.
vi. The CAMWorks Nesting logo will display to indicate that CAMWorks
Nesting 2015 has also been launched as an Add-In within the
SOLIDWORKS/CAMWorks Solids environment.
License File
When you purchase CAMWorks modules from your CAMWorks Reseller, you will
receive a license file. This license file is programmed to run the CAMWorks
machining modules that you have purchased. The following information is also
embedded in the CAMWorks License File:
Duration of the license (Perpetual or Time-bound)
License Type (Standalone or Floating)
Licensing Method (FlexLM Software Encryption or Hardware Dongle)
CAMWorks Modules the user is licensed to run
Number of licenses conferred for each module (only in the case of
Floating license)
The CAMWorks License Manager utility is used to activate the license file and also
to manage/edit the licensing mechanism. Once activated, the modules you are
licensed to run can be viewed in the Authorized modules tab of the CAMWorks
License Manager utility.
As the CAMWorks Nesting application is the module available under the
CAMWorks suite, the licensing mechanism for Nesting is identical to that of
CAMWorks.
Note: The CAMWorks Nesting permanent license can be purchased only through
CAMWorks Resellers. Though the CAMWorks Nesting application can be
downloaded and installed from the CAMWorks website, the permanent
license required to run the CAMWorks Nesting application can only be
purchased only from an authorized Reseller.
To learn more about activating the floating license using FlexLM software
encryption, read: Chapter 7: Activating the Floating License.
Hardware Dongle
A dongle (also referred to as a key or security block) is a small hardware device
that fits on the USB connector/port of the computer. This licensing method can
be used only for standalone licensing.
To use the Hardware Dongle licensing method, you must install the Hardware
Dongle License Driver and the CAMWorks License Manager utilities as a pre-
requisite. These utilities can be downloaded or installed from the CAMWorks
DVD.
To learn more about activating the standalone license using Hardware
Dongle, read:
Chapter 6: Activating the Standalone License using Hardware Dongle.
Permanent License
Chapter Chapter
5 The different types of Permanent License 6
Given in this chapter are the steps to activate a standalone (Node-locked) license
using FlexLM Software licensing method.
5. Browse to the folder where you copied the license file, select the file and
click Open.
6. Click the Status tab and verify that the information has been updated as
follows:
Authorization status = Succeeded
License File Used = path to the file and the <filename>
License Type = Node-locked
7. Click the Authorized Modules tab.
This tab lists the modules you are licensed to run.
The License Duration at the top right corner of this tab indicates
whether you license is perpetual or temporary in nature.
If the License Duration displays Permanent, then it indicates that
your CAMWorks Nesting license is perpetual in nature.
Given in this chapter are the steps to activate a standalone license using Hardware
Dongle Licensing method.
Note: The hardware dongle is essentially your license and you may want to insure
it against loss. If the dongle is lost or stolen, you will be required to purchase
a new license.
Pre-Requisites
CAMWorks License Manager: The CAMWorks License Manager utility is a
pre-requisite for activating the .cod file (Hardware Dongle License). Install
the CAMWorks License Manager utility either from the DVD or download and
install it from the CAMWorks website.
To learn about the installing CAMWorks License Manager, read:
CAMWorks License Manager Utility
Hardware Dongle License Driver: The Hardware Dongle License Driver
(Sentinel Driver ver. 7.6.6) utility on your system facilitates the detection and
Note: If you are updating multiple dongles, make sure you have the correct
.COD file for each dongle.
Supported Platforms
Microsoft Windows 64-bit (x64)
Server Implementations
Windows Server 2008 including R2
Windows 7 Ultimate
Windows 8.1
Windows 10
Clients
Windows 7 SP1 or higher
Windows 8.1
Windows 10
(Home edition are not supported)
Step 1: Pre-Requisites
CAMWorks License Manager: The CAMWorks License Manager utility is a
pre-requisite for activating the permanent license. Install the CAMWorks
License Manager application either from the DVD or download it from the
CAMWorks website.
To learn about the installing CAMWorks License Manager, read:
CAMWorks License Manager Utility
Administrator Privileges: You must be logged in as Administrator with full
privileges when setting up or making changes in the CAMWorks License
Manager.
Direct Access: The license request file required for generating the license
must be created directly on the computer where the license will reside. If
the license request file is created when running the License Manager via
remote communications software such as pcAnywhere (Symantic Corp.) and
submitted to Geometric Americas, Inc., an invalid license will be generated.
Hence, ensure that direct access is available on the PC on which the license
will reside and will be consequently used at least during the stage of
generating the License Request File.
4. Browse to the folder where you copied the license file, select the file and
click Open.
5. Set the Log file path.
The log file must be on the Server that is running the CAMWorks License
Service. The log file folder does not have to be the same as the License
file folder. The log file folder and the log file must have read/write
permissions.
6. Observe the status message at the bottom of the tab. It reads
“CAMWorks License Service does not exist.”
7. Click the Install CAMWorks License Service button. This installs the
CAMWorks License Service.
8. Click the Start button.
9. Now observe the status message at the bottom of the dialog box again.
The message now indicates that the “CAMWorks License Service is
running”.
3. In the Configure FlexLM license group box, make sure the Set Server Host
name and Port number for floating license option is selected.
Select ‘Set Server Host name and Port number for floating license’ in
the License Setup tab
4. After selecting this option, type the name of the Server computer in the
Server Host name field.
The ‘Server Host name’ field requires the Host name of the Server. Since
you are setting up the server computer as a client, the host name of the
client is the same as the Server Host name, so you can type the Host name
that displays at the top of the dialog box. You will need the Host name of the
Server when you set up other client computers.
5. After completing the above steps, click the Authorized Modules tab of the
CAMWorks License Manager Dialog box. All the CAMWorks modules
(including information on their availability, type, borrow status, etc.) are
listed in this tab.
− If the Authorized Modules tab is populated with the CAMWorks
modules, it indicates successful activation of the floating license.
− If the Authorized Modules tab is blank, the Server may have a
software and/or hardware firewall that you need to configure to
allow the clients to access the CAMWorks License Service on the
Server.
Authorized Modules tab populated with CAMWorks modules indicates successful activation of the
floating license on a client
6. Click OK to close the CAMWorks License Manager utility. You are now
ready to set up the client computers to run CAMWorks Nesting.
4. Make sure Set Server Host name and Port number for floating license option
is selected.
5. After selecting this option, type the name of the Server computer in the
Server Host name field.
Select ‘Set Server Host name’ and ‘Port number’ for floating license in the
License Setup tab
Note: The Server Host name must be the Host name of the Server computer, and
not the Host name of the client computer that is shown in the FlexLM
software License group box of the License Setup tab.
6. You can optionally enter the port number of the Server Computer in the
Port number field.
In the Available column, the number indicates how many licenses are
currently available for the CAMWorks Nesting module. When 0
displays, there are no available licenses. When a number greater than
0 displays, then the client can access that particular license.
For example: If there are 20 licenses of the CAMWorks Nesting
module available on a floating network license of which 3 are being
used by client computers, then the Available column will display ’17’.
If all the 20 licenses are being used, then the Available column will
display ‘0’.
The Module column lists the name of the licensed module (‘Nesting’ in
this case). A check mark in the checkbox next to the name of the
licensed module indicates that the module has been assigned to this
client. To access the functions of an available module, check the box
next to the available module.
The Update Licenses button updates/refreshes the availability of
modules of Nesting modules when other clients release modules.
The Start Up column functionality is applicable only for clients on a
floating network license. If a tick is placed in the checkbox of the
Start Up column, it indicates that the CAMWorks Nesting application
should be loaded as an Add-In whenever SOLIDWORKS/CAMWorks
Solids is launched (provided that a license is available).
For example, consider that there are 20 licenses of the CAMWorks
Nesting module available on a floating license. If you want to use
one among the 20 available licenses to be activated automatically
when you load the CAMWorks Nesting Add-In, then place a check
in the checkbox of the Start-up column against the module named
‘Nesting’.
If there are 10 floating licenses of the licensed module and all the
10 are being used by other client computers, then the license will
not be available when CAMWorks Nesting starts. The Available
column will display ‘0’ and the following message will be displayed:
One or more floating licenses that were requested are not available.
Note: In order to borrow a floating license, the Port number mentioned in the
Server License File should be entered in the Port number field in the
License Setup tab on the client. If the Port number is not specified,
then the License Borrowing group will be disabled.
5. From the list, highlight the Nesting module in order to borrow it.
6. In the License borrowing group box, select a date from the Borrow until:
field.
7. Click the Borrow button. Note that a license can be borrowed only for a
maximum of 7 days.
- If you select a date exceeding more than 7 days from the current
date, then the license from the selected CAMWorks Nesting modules
will not be borrowed. In the Remarks field of the Authorized Module
grid will display a message “You cannot borrow that long. So, please
select an earlier date and try again.”
- If you select a date within the 7-day period from the current date and
borrow the license(s), then the license will be borrowed on the
particular client machine.
8. When the borrowed Nesting license is highlighted in the grid, the
following will be observed:
Note: The CAMWorks Nesting license you purchase from your Reseller is usually
perpetual in nature. However, the Update Support Plan has a fixed duration.
You need to repurchase an Update Support Plan after your current plan
expires.
The Authorized Modules tab of the CAMWorks License Manager Dialog box
License Duration
The License duration field at the top right corner of the Authorized Modules tab
in the CAMWorks License Manager Dialog box indicates whether your
CAMWorks Nesting license is perpetual or temporary in nature.
The Authorized Modules tab of the CAMWorks License Manager Dialog box
Note:
If your Update Support Plan expires (indicated by the Support (USP) expiry
date), you can still continue using the licensed module (CAMWorks
Nesting) till the expiry date of your license (indicated by the License Duration
date).
If your license is perpetual in nature, then you can use the licensed
module for ever.
However, in both the above cases, you can no longer avail the benefits
associated with the Update Support Plan unless you renew the plan.
This Chapter explains how to update the CAMWorks Nesting license based on the
combination of License type and method.
7. Once again, click on the Server Settings tab. Click on the Browse button
next to the License file path field. Browse to the folder containing the new
license file.
8. Select the new license file and click Open.
9. In the Log file path field, set the path for the log file.
10. Click the Install CAMWorks License Server button.
11. Click Start to start the License Server and thereby enable the new
license.
12. Click OK to close the CAMWorks License Manager dialog box.
Note: The latest CAMWorks Nesting installers and Service Packs are available
in the Downloads section of the CAMWorks website. Contact your
CAMWorks Reseller for availing the permissions required to access this
website.
CAMWorks Nesting license is May 01, 2016 [20160501]. Since the License version
date of the new CAMWorks Nesting version is a date prior to the USP expiry date,
you are eligible to install and run the new version.
‘License Version Date’ in the CAMWorks Nesting License Info Dialog box
Note: For the CAMWorks Nesting 2015 SP1.0 version, the License version
date is September 15, 2015.
11. TROUBLESHOOTING
As a result of the complexity of the PC operating environment, conflicts and
problems may occur.
This chapter provides suggestions for you to resolve problems with respect to
valid license not being detected.
Topics covered
Valid License not detected
Basic Troubleshooting
- Where to download the latest CAMWorks Nesting updates and
installers
What to do if the Troubleshooting Manual doesn’t solve your problem
Basic Troubleshooting
Some basic troubleshooting can save your time. If you can determine the
software or peripheral that seems to be causing the problem, you can contact
the applicable manufacturer for help. For example, if your mouse is not
functioning correctly, the problem may be caused by the mouse or by
Windows. You may be able to correct the problem quickly by contacting
Microsoft or the mouse manufacturer's customer support.
Before you email us for assistance, there are a number of areas you can check.
The following list is designed to help you discover common problems or direct
you toward problem areas that may have been overlooked. In some cases, your
problem may be caused by something as simple as a loose cable.
58 Troubleshooting
Installation & License Activation Guide
Troubleshooting 59
Installation & License Activation Guide
60 Troubleshooting