Professional Documents
Culture Documents
Kathrein - K 782 10251
Kathrein - K 782 10251
Technical Data
Type No. 782 10248 782 10250
Single Unit Single Unit
Internet: http://www.kathrein.de 782 10248, 782 10249, 782 10250, 782 10251 Page 1 of 2
KATHREIN-Werke KG . Anton-Kathrein-Straße 1 – 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-494
Dual-Band Combiner
470 – 960 MHz 1710 – 2170 MHz
DVB-H / CDMA 800 / GSM 900 GSM 1800 / UMTS
Attenuation/dB
diameter of
10
734 360 34 – 60 mm
20
734 361 60 – 80 mm 30
470 – 960 1710 – 2170
60
734 364 120 – 140 mm
70
734 365 45 – 125 mm 80
90
Type No. Description
DC stop 100
400 600 800 1000 1200 1400 1600 1800 2000 2200 2400
784 10367 50-Ω load Frequency/MHz
1.5 W / indoor or outdoor
793 301 DC stop Diagram II
Port 1 ↔ Port 3 Port 2 ↔ Port 3
0
Attenuation/dB
0.1
0.2
470 – 960 1710 – 2170
0.3
Side view
0.4
64
Single Unit
0.5
0.6
0.7
0.8
0.9
1.0
400 600 800 1000 1200 1400 1600 1800 2000 2200 2400
Side view Frequency/MHz
Double Unit
Earthing Instruction
Single Unit Double Unit
782 10248, 782 10250 782 10249, 782 10251
Toothed washer
Earthing cable
(not included in the
470 - 960 MHz
Port 1
scope of delivery)
Top view Internal earthing cable
Single Unit, Washer
Double Unit Earthing screw
102
Please note:
The mounting plates can be removed by loosening the screws ➀ to ➃
(M5 x 10) and replaced with other means of mounting, always provided that
the max. drilled depth of 8.5 mm is respected with the choice of replacement
screws.
As a result of more stringent legal regulations and judgements regarding
Subject to alteration.
product liability, we are obliged to point out certain risks that may arise
when products are used under extraordinary operating conditions.
➀ ➂ Extraordinary operating conditions, such as heavy icing or exceptional dynam-
Bottom view ic stress (e.g. strain caused by oscillating support structures), may result in the
breakage of a mast mounted device or even cause it to fall to the ground.
Single Unit,
Double Unit These facts must be considered during the site planning process.
The installation team must be properly qualified and also be familiar with
4 screws M5 x 10 the relevant national safety regulations.
4 spring washers
The details given in our data sheets have to be followed carefully when
5.5 DIN 6095 installing the antennas, filters, combiners, amplifiers and accessories.
The limits for the coupling torque of RF connectors, recommended by
the connector manufacturers must be obeyed.
Terminate unused inputs with a suitable 50-Ω load, e.g. 784 10367.
Any previous datasheet issues have now become invalid.
Page 2 of 2 782 10248, 782 10249, 782 10250, 782 10251 Internet: http://www.kathrein.de
KATHREIN-Werke KG . Anton-Kathrein-Straße 1 – 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-494