Professional Documents
Culture Documents
Description of controller
Analog of susmic 12,52 controller is a microprocessor that the current supplied to the two
pressure reducing valves mounted on the hydrostatic pump. The processor receives the signal
from:
- Diesel engine RPM sensor (to adjust the current in proportion to engine RPM)
- Inch/brake pedal potentiometer (to reduce the current value to the pedal stroke)
- F-N-R selector (to establish which of the two valves has to be energize)
- Emergency button (which is locate near controller) to set 30% of power on reducing valves.
It is need to move telescopic handler to the garage for repair. On this mode controller does
not react on diesel rpm sensor and inch/brake pedal sensor.
- Controller is configured through WiFi on Android device. (RPM and inching pedal range)
Number Checked signal from Error LED flash code Error caused by
of errore
1 Sensor power Sensor power out of range