Professional Documents
Culture Documents
FULL FLOW
REVERSE CIRCULATION
JUNK BASKETS
Manual C320
2nd Printing, Feb. 2013. Rev. 1 11006 Lucerne Street | Houston, Texas 77016 | T: +1 281 219 6613 | Fax: +1 281 219 6638 | logan.sales@innovex-inc.com
PRODUCT MANUAL DOCUMENT PAGE
Full Flow Reverse Manual C320 1
FISHING TOOLS
Circulation Junk Baskets
Contents
Logan Full Flow Reverse Circulation Junk Basket
Overview...............................................................................................................2
Uses.........................................................................................................................2
Construction........................................................................................................2
Tool Illustration.................................................................................................. 3
Operation............................................................................................................. 4
Recovering a Fish with a Junk Basket
Equipped with a Mill Shoe................................................................ 4
Recovering a Fish with a Junk Basket
Equipped with a Finger Shoe.......................................................... 5
Fish or Core Removal............................................................................... 5
Maintenance...................................................................................................... 5
Disassembly....................................................................................................... 6
Assembly............................................................................................................. 6
Specifications and Parts Lists.......................................................... 7 – 12
Junk Catcher Assemblies................................................................ 13 – 22
Rock Bit Cone Dimensions.......................................................................23
LEGAL NOTICE
2nd Printing, Feb. 2013. Rev. 1 11006 Lucerne Street | Houston, Texas 77016 | T: +1 281 219 6613 | Fax: +1 281 219 6638 | logan.sales@innovex-inc.com
PRODUCT MANUAL DOCUMENT PAGE
Full Flow Reverse Manual C320 2
FISHING TOOLS
Circulation Junk Baskets
OVERVIEW The short fingers of the upper junk retainer. This blocks off the reverse
catcher are designed to break the core circulation ports and provides a pas-
The Logan Full Flow Reverse Circulation that has been cut by the mill shoe. The sageway between the top sub and bar-
Junk Basket is designed to successfully combination of short and long fingers of rel that directs flow through the inside
remove all types of small junk objects the lower junk catcher trap and retrieve diameter of the barrel to keep it clean
from the hole that would not be fished the core and junk. Both junk catchers during run in.
out by other junk baskets by utilizing the freely-revolve within the mill shoe, so
principle of reverse fluid circulation. It is After the steel ball is dropped and
breakage of the junk catcher fingers is
similar to the Logan Reverse Circulation seated, pump pressure causes the pins
eliminated.
Junk Basket. to shear. The ball seat drops down to the
Valve Assembly matching beveled shoulder in the barrel.
The unique feature of the Logan Full The full flow valve assembly consists of: This opens the cavity to start reverse
Flow Reverse Circulation Junk Basket is a steel ball, ball seat, ball seat retainer, circulation.
its Full Flow Valve Assembly. This valve four (4) shear pins, and O-ring seals.
assembly eliminates premature reverse Optional Accessories
flow action. It seals off the cavity used As with the Logan Reverse Circulation Mill Shoes
for reverse circulation until it is needed, Junk Basket, reverse fluid circulation is The hard, rugged, and long-lasting
yet enables continuous circulation created by the unique construction of qualities of tungsten-carbide-faced mill
through the center while running in the the barrel, which is basically a two-bowl shoes can cut away any protruding
hole. This keeps shale and debris from assembly. excess metal that may interfere with
clogging the valve — the primary cause the free entry and retention of the
When the steel ball is in place in the
of premature reverse flow action. Re- debris in the Junk Basket.
valve seat, circulation fluid is directed
verse fluid circulation can be maintained around the valve through the inner pas- If the fish is embedded in a hard forma-
even when the tool is fitted with sages of the barrel, jetted outward and tion and a core must be cut, the Junk
a fishing magnet. downward against the full circumfer- Basket must be equipped with the
The tool’s drain feature eliminates pull- ence of the hole, flows in a continuous proper mill shoe. If the fish is laying
ing a wet string even if the inner barrel stream into the barrel, up through the loosely on the bottom of the hole, the
becomes plugged. barrel, then out the return ports at the Junk Basket may be equipped with a
upper end of the barrel. proper mill or finger shoe.
USES
Sometimes, lowering a reverse circula- Logan Full Flow Reverse Circulation
The Logan Full Flow Reverse Circula- tion junk basket towards a fish may Junk Baskets are furnished with a stan-
tion Junk Basket effectively retrieves all cause pieces of shale, shell, and other dard Type A mill shoe. It is constructed
types of junk that accumulates at the debris to break away from the walls of of conventional hard metal and has side
bottom of a well: rock bit cones and the well, sift up through the junk catch- wings.
bearings, tong pins, broken slips, bits of ers, and clog the valve of that starts the
The Type B mill shoe is similar to the
wireline, small hand tools, debris from reverse flow action. A clogged valve may
Type A design, but is dressed with sin-
twisted-off drill strings, mill cuttings, and cause reverse circulation to begin too
tered tungsten carbide. This extremely
similar items. early or at an other undesirable time.
tough, hard-faced material will rapidly
CONSTRUCTION The unique feature of the Logan Full and effectively mill junk during fishing
Flow Reverse Circulation Junk Basket is operations.
The Logan Full Flow Reverse Circula- the Full Flow Valve Assembly. This valve
tion Junk Basket consists of: a lifting sub The Type C Mill Shoe is a flat-bottomed
assembly seals off the cavity used for
(provided for ease of handling and for shoe. It is dressed with sintered tung-
reverse circulation until it is needed.
storage of the steel ball), top sub, barrel, sten carbide on the bottom and on the
The ball seat of the Logan Full Flow
full flow valve assembly, filter, Type A inner and outer faces. It will effectively
Reverse Circulation Junk Basket is
mill shoe, and an upper and lower junk mill junk and is especially effective for
fastened with shear pins to the ball seat
catcher. (For the component breakdown cutting cores.
of the junk catcher assembly, refer to
the Junk Catcher Assemblies tables on
pages 13 – 22.)
2nd Printing, Feb. 2013. Rev. 1 11006 Lucerne Street | Houston, Texas 77016 | T: +1 281 219 6613 | Fax: +1 281 219 6638 | logan.sales@innovex-inc.com
PRODUCT MANUAL DOCUMENT PAGE
Full Flow Reverse Manual C320 3
FISHING TOOLS
Circulation Junk Baskets
Top Sub
O-Rings
Barrel
Upper Junk
Catcher Assembly
Lower Junk
Catcher Assembly
Mill Shoe
Logan Oil Tools reserves the right to change or discontinue designs without notice.
2nd Printing, Feb. 2013. Rev. 1 11006 Lucerne Street | Houston, Texas 77016 | T: +1 281 219 6613 | Fax: +1 281 219 6638 | logan.sales@innovex-inc.com
PRODUCT MANUAL DOCUMENT PAGE
Full Flow Reverse Manual C320 4
FISHING TOOLS
Circulation Junk Baskets
Finger Shoes The Logan Full Flow Reverse Circulation Turn the circulation pumps back on to
A finger shoe may be installed on the Junk Basket is made up to the bottom of shear the pins and actuate the full flow
bottom of the barrel in place of the mill the fishing string. Remove the lifting sub. valve assembly for reverse circulation.
shoe when the junk is too large to pass Retain the lifting sub and the steel ball Observe the mud pressure gauge. A
through the catchers. Finger shoes will on the rig floor. Connect the top sub of slight pressure build-up will occur when
normally retrieve larger objects than mill the Junk Basket to the string. the steel ball reaches the ball seat. A
shoes, provided the junk is lying loose sudden drop in pressure will be noticed
If small junk particles are prevalent in
on the bottom of the well and a core on the gauge when the pins shear. This
the hole, a junk sub should be installed
does need not to be taken. will indicate that reverse circulation has
above the Junk Basket. If a window sub
begun.
After the Junk Basket has engaged the is available, install the it on the top joint
fish, rotation while lowering will cause of drill pipe and connect the kelly. While maintaining high pressure circula-
the long fingers to close under the fish tion, lower the tool with slow right-hand
Lower the Junk Basket to a point within
and retain it in the barrel. Finger re- rotation and lower the Junk Basket
several feet from the bottom of the hole.
placements are easy and inexpensive to to the bottom of the hole. If coring,
Begin circulation to wash the hole. Stop
replace on the finger shoe body. continue slow right-hand rotation and
circulation and turn off the pumps. Un-
lowering until a core at least ten inches
Magnet Inserts screw the kelly from the string. Drop the
long has been cut.
A Logan Full Flow Reverse Circulation steel ball down the drill pipe. Reconnect
Junk Basket can be easily converted the kelly. NOTE: When using the tungsten
to an effective fishing magnet with the carbide-faced shoes, maintain one (1)
CAUTION: Make sure the inside diam-
advantages of reverse fluid circulation. ton of weight on the shoe and rotate
eters of the tool joints in the string are
Simply replace the junk catcher assem- the basket to give a surface speed of
large enough to pass the steel ball.
bly with a Logan Magnet Insert. 250 ft/min to ensure proper milling.
Be sure to retain the steel ball at the
Logan Magnet Inserts are machined to surface while the Junk Basket is being Stop rotation and circulation and pull
fit into the recess normally occupied by lowered into the hole. the Logan Full Flow Reverse Circulation
the junk catcher assembly. The Logan Junk Basket from the hole.
If a window sub is available, remove the
Magnet Insert is generally used to thor-
plug from the window sub and drop the
oughly clean the hole prior to diamond Recovering a Fish with a Junk
steel ball down the drill pipe. Replace
drilling and in hard-to-drill formations. Basket Equipped with a Mill Shoe
the plug in the window sub.
First, determine that the Logan Full Flow
OPERATION
When the steel ball is dropped into the Reverse Circulation Junk Basket is prop-
First, examine the Logan Full Flow valve seat, circulation fluid travels out- erly assembled and that all of the parts
Reverse Circulation Junk Basket and ward and downward through the inner are in good working condition.
make sure it is properly assembled passage of the barrel and out through
Lower the Junk Basket to approximately
and in good working condition. Check the vents in the lower end. The fluid is
ten feet off the bottom of the hole. Be-
inside the top sub to be sure the ball then deflected to the center of the tool
fore dropping the steel ball, turn on the
seat is properly positioned in the ball and up through the return holes in the
circulation pumps to force circulation
seat retainer and the shear pins are in upper end of the barrel. This reverse
through the Junk Basket to condition the
place. Select the proper shoe. If the fish fluid circulation directs and carries the
mud and flush out any mud that may
is embedded in a hard formation and a debris into the hollow barrel above the
have accumulated in the barrel during
core must be cut, the Junk Basket must junk catcher assembly.
the run. Maintain circulation for a few
be equipped with the proper mill shoe. minutes. Turn off the circulating pumps.
(See Mill Shoes and Finger Shoes for
more information.)
2nd Printing, Feb. 2013. Rev. 1 11006 Lucerne Street | Houston, Texas 77016 | T: +1 281 219 6613 | Fax: +1 281 219 6638 | logan.sales@innovex-inc.com
PRODUCT MANUAL DOCUMENT PAGE
Full Flow Reverse Manual C320 5
FISHING TOOLS
Circulation Junk Baskets
Unscrew the kelly from the string. Drop Recovering a Fish with a Junk maintaining high pressure circulation,
the steel ball down the drill pipe and Basket Equipped with a Finger Shoe slowly rotate the string to the right and
reconnect the kelly. If a window sub is First, determine that the Logan Full Flow lower it until approximately two tons of
available, remove the plug from the win- Reverse Circulation Junk Basket is prop- weight rest against the bottom of the
dow sub and drop the steel ball down erly assembled and that all of the parts hole. This will cause the fingers of the
the drill pipe. Replace the plug in the are in good working condition. finger shoe to close under the fish. Stop
window sub. rotation and circulation and pull the
Remove the lifting sub and keep it and
Junk Basket from the hole.
After the steel ball has dropped down the steel ball on the rig floor.
the drill pipe, its downward progress will
Connect the Junk Basket's top sub to Fish or Core Removal
be halted when it encounters the valve
the string and run the tool in the hole. Unscrew the mill or finger shoe from the
seat in the Junk Basket. When circula-
If small junk particles are prevalent in Junk Basket and thoroughly wash out
tion is resumed, the fluid is forced in
the hole, a junk sub should be installed the barrel.
a continuous stream that creates the
on top of the top sub. If a window sub
reverse circulation action — to the cen- NOTE: The Logan Full Flow Reverse
is available, install the it on the top joint
ter of the Junk Basket, up through the Circulation Junk Basket should be
of drill pipe before connecting the kelly.
inner passages of the barrel, jetted out washed as soon as possible after use.
of the return ports in the upper barrel Lower the Junk Basket to approximately Pay particular attention to the space
and down against the full circumference ten feet off the bottom of the hole. Be- between the inner and outer barrels.
of the hole, and deflected to flush all fore dropping the steel ball, turn on the
MAINTENANCE
objects and debris towards the center. circulation pumps to force circulation
through the Junk Basket to condition the Good maintenance will ensure the best
Turn on the circulating pumps. While
mud and flush out any mud that may performance and maximum life of the
maintaining high pressure circulation,
have accumulated in the barrel during Logan Full Flow Reverse Circulation
slowly rotate the string to the right and
the run. Maintain circulation for a few Junk Basket. Disassemble and thor-
lower the Junk Basket to the bottom of
minutes. Turn off the circulating pumps. oughly clean the Junk Basket as soon as
the hole.
Unscrew the kelly from the string. Drop possible after each job. Pay particular
If coring, continue right-hand rotation attention to the space between the inner
the steel ball down the drill pipe and
and lower until a 10-inch-long core has and outer barrels. Worn or damaged
reconnect the kelly. If a window sub is
been cut. parts should be replaced during disas-
available, remove the plug from the win-
NOTE: When using hard-faced mill dow sub and drop the steel ball down sembly/assembly procedures.
shoes, maintain one (1) ton of weight the drill pipe. Replace the plug in the NOTE: If using a Logan Magnet Insert,
on the shoe and rotate the basket 50 window sub. thoroughly clean it after each use
–150 rpm to ensure proper milling. and make sure the circulation hole is
After the steel ball has dropped down
The piece of cut core allows the fish to the drill pipe, its downward progress will clean. Always store the magnet insert
ride past the junk catcher. The fingers be halted when it encounters the valve with the keeper in place to preserve
on the junk catcher fold back while the seat in the Junk Basket. When circula- magnetism.
core and fish enter. Pulling up the Junk tion is resumed, the fluid is forced in
Basket will cause the junk catcher's fin- a continuous stream that creates the
gers to dig in and cut off a section of the reverse circulation action — to the cen-
core, thereby holding the fish and core ter of the Junk Basket, up through the
securely in the Junk Basket barrel. inner passages of the barrel, jetted out
of the return ports in the upper barrel
Stop rotation and circulation and pull
and down against the full circumference
the Logan Full Flow Reverse Circulation
of the hole, and deflected to flush all
Junk Basket from the hole.
objects and debris towards the center.
2nd Printing, Feb. 2013. Rev. 1 11006 Lucerne Street | Houston, Texas 77016 | T: +1 281 219 6613 | Fax: +1 281 219 6638 | logan.sales@innovex-inc.com
PRODUCT MANUAL DOCUMENT PAGE
Full Flow Reverse Manual C320 6
FISHING TOOLS
Circulation Junk Baskets
2nd Printing, Feb. 2013. Rev. 1 11006 Lucerne Street | Houston, Texas 77016 | T: +1 281 219 6613 | Fax: +1 281 219 6638 | logan.sales@innovex-inc.com
PRODUCT MANUAL DOCUMENT PAGE
Full Flow Reverse Manual C320 7
FISHING TOOLS
Circulation Junk Baskets
Logan Oil Tools reserves the right to change or discontinue designs without notice.
(1) For component breakdown of the junk catcher assemblies, refer to Junk Catcher Assemblies chart.
(2) For type A, B, or C shoes: unless specified, shoes will be furnished with the same O.D. as minimum hole size shown.
(3) Finger shoe replacement is furnished with the same O.D. as standard shoe unless otherwise specified.
2nd Printing, Feb. 2013. Rev. 1 11006 Lucerne Street | Houston, Texas 77016 | T: +1 281 219 6613 | Fax: +1 281 219 6638 | logan.sales@innovex-inc.com
PRODUCT MANUAL DOCUMENT PAGE
Full Flow Reverse Manual C320 8
FISHING TOOLS
Circulation Junk Baskets
OPTIONAL COMPONENTS
MILL SHOE B Logan Part No. S3000-B S3001-B S3002-B S3003-B S3004-B S3005-B S3006-B
(Tungsten Carbide Bowen No. 71228 70909 71124 72070 72081 71199 72080
Mill Teeth)
MILL SHOE C Logan Part No. S3000-C S3001-C S3002-C S3003-C S3004-C S3005-C S3006-C
(Tungsten Carbide Faced) Bowen No. 71228 70909 71124 72070 72081 71199 72080
LIFTING SUB Logan Part No. D6000 D6002 D6004 D6006 D6008 D6009 D6009
Bowen No. 4568 424 425 1849 426 427 427
PIPE PLUG Logan Part No. S9000 S9000 S9001 S9002 S9003 S9003 S9003
Bowen No. 61520 61520 61521 61522 61523 61523 61523
T-WRENCH Logan Part No. S10000 S10000 S10000 S10001 S10001 S10002 S10002
Bowen No. 72067 72067 72067 72069 72069 72068 72068
FINGER SHOE
COMPLETE ASSEMBLY Logan Part No. 600-101 600-102 600-115 600-107 600-108 600-109 600-110
Bowen No. 7300 4456 2738 2740 2741 2742 2743
BODY Logan Part No. D7001 D7002 D7015 D7007 D7008 D7009 D7010
Bowen No. 7300-2 4456-2 2738-2 2740-2 2741-2 2742-2 2743-2
REPLACEMENT Logan Part No. D10001 D10002 D10015 D10007 D10008 D10009 D10010
Bowen No. 7300-1 4456-1 2738-1 2740-1 2741-1 2742-1 2743-1
Logan Oil Tools reserves the right to change or discontinue designs without notice.
(1) For component breakdown of the junk catcher assemblies, refer to Junk Catcher Assemblies chart.
(2) For type A, B, or C shoes: unless specified, shoes will be furnished with the same O.D. as minimum hole size shown.
(3) Finger shoe replacement is furnished with the same O.D. as standard shoe unless otherwise specified.
2nd Printing, Feb. 2013. Rev. 1 11006 Lucerne Street | Houston, Texas 77016 | T: +1 281 219 6613 | Fax: +1 281 219 6638 | logan.sales@innovex-inc.com
PRODUCT MANUAL DOCUMENT PAGE
Full Flow Reverse Manual C320 9
FISHING TOOLS
Circulation Junk Baskets
MAGNET INSERTS
COMPLETE ASSEMBLY Logan Part No. … 600-047 600-050 600-052 600-053 600-054 600-055
Bowen No. … 61840 61866 61876 61953 61961 61963
ADAPTER Logan Part No. … E4016 E4018 E4020 E4021 E4022 E4023
Bowen No. … 61841 61867 61948 61954 61966 61968
MAGNETIC ASSEMBLY Logan Part No. … 600-069 600-071 600-073 600-074 600-075 600-075
Bowen No. … 61812 61816 61820 61822 61826 61826
REPAIR KITS
UPPER CATCHER Logan Part No. 14000-008RK 14000-009RK 600-020RK 14000-011RK 14000-012RK 14000-013RK 14000-14RK
REPAIR KITS Bowen No. 22070-WK 22075-WK 28349-WK 22050-WK 21640-WK 14632-WK 25235-WK
LOWER CATCHER Logan Part No. 600-016RK 600-017RK 500-051RK 600-022RK 600-023RK 600-024RK 500-019RK
REPAIR KITS Bowen No. 21855-WK 21780-WK 15130-WK 21725-WK 18725-WK 14633-WK 18945-WK
VALVE REPAIR KIT Logan Part No. 14000-032 14000-033 14000-034 14000-035 14000-036 14000-037 14000-038
Bowen No. 72064 72062 72063 72058 72061 72065 72059
Logan Oil Tools reserves the right to change or discontinue designs without notice.
(1) For component breakdown of the junk catcher assemblies, refer to Junk Catcher Assemblies chart.
(2) For type A, B, or C shoes: unless specified, shoes will be furnished with the same O.D. as minimum hole size shown.
(3) Finger shoe replacement is furnished with the same O.D. as standard shoe unless otherwise specified.
2nd Printing, Feb. 2013. Rev. 1 11006 Lucerne Street | Houston, Texas 77016 | T: +1 281 219 6613 | Fax: +1 281 219 6638 | logan.sales@innovex-inc.com
PRODUCT MANUAL DOCUMENT PAGE
Full Flow Reverse Manual C320 10
FISHING TOOLS
Circulation Junk Baskets
Logan Oil Tools reserves the right to change or discontinue designs without notice.
(1) For component breakdown of the junk catcher assemblies, refer to Junk Catcher Assemblies chart.
(2) For type A, B, or C shoes: unless specified, shoes will be furnished with the same O.D. as minimum hole size shown.
(3) Finger shoe replacement is furnished with the same O.D. as standard shoe unless otherwise specified.
2nd Printing, Feb. 2013. Rev. 1 11006 Lucerne Street | Houston, Texas 77016 | T: +1 281 219 6613 | Fax: +1 281 219 6638 | logan.sales@innovex-inc.com
PRODUCT MANUAL DOCUMENT PAGE
Full Flow Reverse Manual C320 11
FISHING TOOLS
Circulation Junk Baskets
FINGER SHOE
COMPLETE ASSEMBLY Logan Part No. 600-111
Bowen No. 2744
BODY Logan Part No. D7011
Bowen No. 2744-2
REPLACEMENT Logan Part No. D10011
Bowen No. 2744-1
MAGNET INSERTS
COMPLETE ASSEMBLY Logan Part No. 600-056
Bowen No. 61973
ADAPTER Logan Part No. E4024
Bowen No. 61974
MAGNETIC ASSEMBLY Logan Part No. 600-076
Bowen No. 61828
Logan Oil Tools reserves the right to change or discontinue designs without notice.
(1) For component breakdown of the junk catcher assemblies, refer to Junk Catcher Assemblies chart.
(2) For type A, B, or C shoes: unless specified, shoes will be furnished with the same O.D. as minimum hole size shown.
(3) Finger shoe replacement is furnished with the same O.D. as standard shoe unless otherwise specified.
2nd Printing, Feb. 2013. Rev. 1 11006 Lucerne Street | Houston, Texas 77016 | T: +1 281 219 6613 | Fax: +1 281 219 6638 | logan.sales@innovex-inc.com
PRODUCT MANUAL DOCUMENT PAGE
Full Flow Reverse Manual C320 12
FISHING TOOLS
Circulation Junk Baskets
REPAIR KITS
UPPER CATCHER Logan Part No. 14000-015RK
REPAIR KITS Bowen No. 31046-WK
LOWER CATCHER Logan Part No. 600-026RK
REPAIR KITS Bowen No. 21760-WK
VALVE REPAIR KIT Logan Part No. 14000-039
Bowen No. 72060
Logan Oil Tools reserves the right to change or discontinue designs without notice.
(1) For component breakdown of the junk catcher assemblies, refer to Junk Catcher Assemblies chart.
(2) For type A, B, or C shoes: unless specified, shoes will be furnished with the same O.D. as minimum hole size shown.
(3) Finger shoe replacement is furnished with the same O.D. as standard shoe unless otherwise specified.
2nd Printing, Feb. 2013. Rev. 1 11006 Lucerne Street | Houston, Texas 77016 | T: +1 281 219 6613 | Fax: +1 281 219 6638 | logan.sales@innovex-inc.com
PRODUCT MANUAL DOCUMENT PAGE
Full Flow Reverse Manual C320 13
FISHING TOOLS
Circulation Junk Baskets
OVERVIEW
Long Finger with Spring Short Finger with Spring
The alternately long and short fingers of the junk
catcher assembly extend almost to the center of
the basket to form a close-fitting receptacle that
will retain small pieces of junk that may impede
drilling progress or hold a core sample.
CONSTRUCTION
The steel body design provides greater strength
and durability. The retainer ring, retainer screws
and springs are made of stainless steel to elimi- Catcher Body
nate rust and corrosion problems. Fingers are
inexpensive and can be easily replaced.
ASSEMBLY
After redressing a junk catcher assembly, care
must be taken to ensure that alternate long and
short fingers are assembled in proper sequence.
Special Notes:
(1) Code: Each finger is stenciled with a letter or letter-number code. These codes are used
in lieu of the part number because of space limitation. See the Finger Code Chart below
to cross-reference the code with the part number.
2nd Printing, Feb. 2013. Rev. 1 11006 Lucerne Street | Houston, Texas 77016 | T: +1 281 219 6613 | Fax: +1 281 219 6638 | logan.sales@innovex-inc.com
PRODUCT MANUAL DOCUMENT PAGE
Full Flow Reverse Manual C320 14
FISHING TOOLS
Circulation Junk Baskets
Logan Oil Tools reserves the right to change or discontinue designs without notice.
2nd Printing, Feb. 2013. Rev. 1 11006 Lucerne Street | Houston, Texas 77016 | T: +1 281 219 6613 | Fax: +1 281 219 6638 | logan.sales@innovex-inc.com
PRODUCT MANUAL DOCUMENT PAGE
Full Flow Reverse Manual C320 15
FISHING TOOLS
Circulation Junk Baskets
Logan Oil Tools reserves the right to change or discontinue designs without notice.
2nd Printing, Feb. 2013. Rev. 1 11006 Lucerne Street | Houston, Texas 77016 | T: +1 281 219 6613 | Fax: +1 281 219 6638 | logan.sales@innovex-inc.com
PRODUCT MANUAL DOCUMENT PAGE
Full Flow Reverse Manual C320 16
FISHING TOOLS
Circulation Junk Baskets
Logan Oil Tools reserves the right to change or discontinue designs without notice.
2nd Printing, Feb. 2013. Rev. 1 11006 Lucerne Street | Houston, Texas 77016 | T: +1 281 219 6613 | Fax: +1 281 219 6638 | logan.sales@innovex-inc.com
PRODUCT MANUAL DOCUMENT PAGE
Full Flow Reverse Manual C320 17
FISHING TOOLS
Circulation Junk Baskets
Logan Oil Tools reserves the right to change or discontinue designs without notice.
2nd Printing, Feb. 2013. Rev. 1 11006 Lucerne Street | Houston, Texas 77016 | T: +1 281 219 6613 | Fax: +1 281 219 6638 | logan.sales@innovex-inc.com
PRODUCT MANUAL DOCUMENT PAGE
Full Flow Reverse Manual C320 18
FISHING TOOLS
Circulation Junk Baskets
Logan Oil Tools reserves the right to change or discontinue designs without notice.
2nd Printing, Feb. 2013. Rev. 1 11006 Lucerne Street | Houston, Texas 77016 | T: +1 281 219 6613 | Fax: +1 281 219 6638 | logan.sales@innovex-inc.com
PRODUCT MANUAL DOCUMENT PAGE
Full Flow Reverse Manual C320 19
FISHING TOOLS
Circulation Junk Baskets
Logan Oil Tools reserves the right to change or discontinue designs without notice.
2nd Printing, Feb. 2013. Rev. 1 11006 Lucerne Street | Houston, Texas 77016 | T: +1 281 219 6613 | Fax: +1 281 219 6638 | logan.sales@innovex-inc.com
PRODUCT MANUAL DOCUMENT PAGE
Full Flow Reverse Manual C320 20
FISHING TOOLS
Circulation Junk Baskets
Logan Oil Tools reserves the right to change or discontinue designs without notice.
2nd Printing, Feb. 2013. Rev. 1 11006 Lucerne Street | Houston, Texas 77016 | T: +1 281 219 6613 | Fax: +1 281 219 6638 | logan.sales@innovex-inc.com
PRODUCT MANUAL DOCUMENT PAGE
Full Flow Reverse Manual C320 21
FISHING TOOLS
Circulation Junk Baskets
Logan Oil Tools reserves the right to change or discontinue designs without notice.
2nd Printing, Feb. 2013. Rev. 1 11006 Lucerne Street | Houston, Texas 77016 | T: +1 281 219 6613 | Fax: +1 281 219 6638 | logan.sales@innovex-inc.com
PRODUCT MANUAL DOCUMENT PAGE
Full Flow Reverse Manual C320 22
FISHING TOOLS
Circulation Junk Baskets
Logan Oil Tools reserves the right to change or discontinue designs without notice.
2nd Printing, Feb. 2013. Rev. 1 11006 Lucerne Street | Houston, Texas 77016 | T: +1 281 219 6613 | Fax: +1 281 219 6638 | logan.sales@innovex-inc.com
PRODUCT MANUAL DOCUMENT PAGE
Full Flow Reverse Manual C320 23
FISHING TOOLS
Circulation Junk Baskets
2nd Printing, Feb. 2013. Rev. 1 11006 Lucerne Street | Houston, Texas 77016 | T: +1 281 219 6613 | Fax: +1 281 219 6638 | logan.sales@innovex-inc.com
PRODUCT MANUAL DOCUMENT PAGE
Full Flow Reverse Manual C320 24
FISHING TOOLS
Circulation Junk Baskets
NOTES
2nd Printing, Feb. 2013. Rev. 1 11006 Lucerne Street | Houston, Texas 77016 | T: +1 281 219 6613 | Fax: +1 281 219 6638 | logan.sales@innovex-inc.com
PRODUCT MANUAL DOCUMENT PAGE
Full Flow Reverse Manual C320 25
FISHING TOOLS
N O RCirculation
T H A M Junk
E R IBaskets
CA
COR POR ATE F I S H ING TOOL S M IDCONTIN E NT NOR THWE ST
H E ADQUAR TE R S 1519 S. Flournoy Rd 17712 W. Hwy 33 1848 Old Route 33
4310 North Sam Alice, TX 78332 Cashion, OK 73016 Weston, WV 26452
Houston Parkway East T: +1 361 396 0139 T: +1 832 775 9140 T: +1 304 841 0821
Houston, TX 77032
10938 Lucerne St 2709 S. Ann Arbor Ave 109 N. Madison Ave
T: +1 346 398 0000
Houston, TX 77016 Oklahoma City, OK Grove City, PA 161257
sales@innovex-inc.com
T: +1 281 219 6613 73128 T: +1 724 605 1397
E AST TE X AS & T: +1 405 491 2658
601 McDonald St ROC K IE S |
LOU I S IANA Odessa, TX 79761 PE R M IAN BAS IN BAK K E N
1138 West Harrison Rd T: +1 432 580 7414
9513 W. County Rd 143 13 Town & County Ln
Longview, TX 75604
1034 Forum Dr Midland, TX 79706 Williston, ND 58802
T: +1 903 759 2800
Broussard, LA 70518 T: +1 979 314 3764 T: +1 701 353 3334
2212 Highway 662 N T: +1 337 492 5228
3111 W. 114th 480 Basher Dr
Building C
118 Common Court Levelland, TX 79336 Berthoud, CO 80513
Amelia LA 70340
Houma, LA 70360 T: +1 806 215 7960 T: +1 720 552 9982
T: +1 985 412 4980
T: +1 985 868 7333
5910 S. County Rd 1270 600 17th St, Suite
SOUTH TE X AS 2415 2nd Ave West Midland, TX 79706 2800 South Tower
5746 Leopard Street Williston, ND 58801 T: +1 432 999 4013 Denver, CO 80202
Corpus Christi, TX T: +1 701 572 0565 T: +1 601 218 3728
651 McDonald Street
78408
1294 South 1500 East Odessa, TX 79761 CANADA
T: +1 361 452 2771
Vernal, UT 84078 T: +1 918 445 0588
4116-51 Avenue NW
178 Oil Road T: +1 435 781 2856
Edmonton, Alberta,
Pleasanton, TX 78064
Canada T6E 5V8
T: +1 830 401 5887
T: +1 780 433 9957
F: +1 780 472 2351
L AT I N MIDDLE E A S T E U R OP E ,
AMERICA & A SI A CA SPI AN
M E X ICO U N ITE D AR AB & A F R IC A
Mexico City, Mexico E M IR ATE S
SCOTL AN D
T: +52 55 5545 8111 Off ice 2109, Jumeirah
1 Minto Place
M: +52 1 55 2668 1760 Bay X3 Tower
Altens Industrial Estate,
Cluster X, Jumeirah Lake
Carretera Villahermosa – Aberdeen, Scotland
Towers, Dubai, UAE
Cárdenas Km 5.5, Bodega AB12 3SN
PO BOX 333648
M1L6B2, Interior Parque T: +44 1224 659 000
T: +971 4 454 8616
Logístico Industrial Tabasco,
Ria. Anacleto Canabal SAU DI AR AB IA
4ta sección, Centro Tabasco,
7958 Abu Al Husan Al
86287
Zahrawy St
T: +52 9933 168887
Al Khalidiyah Ash Shamaliyah,
Dammam 32231 3257
COLOM B IA
T: +966 13 814 6662
Kra 100 No. 25 C 11 Bd 7,
Centro empresarial Omega SU LTANATE OF OMAN
Bogota, Columbia CP 110911
Warehouse # 160Z, BBH
T: +57 1 756 1920
Logistics City
Rusayl Industrial Area, Muscat,
AR G E NTINA
Sultanate of Oman
Espana 337 Cipolletti,
T: +968 225070199
Argentina
Luis Beltran 367 Neuquen,
Argentina
T: +54 911 5643 4197