Professional Documents
Culture Documents
Geometry:
Supports:
Edge supports:
from-to kind of supports
1 2 w,phi,theta : fixed - u,v : free (simply supported and clamped)
3 4 w,phi,theta : fixed - u,v : free (simply supported and clamped)
Spring supports:
----- position ---- ------------ rigidity ---------
Package layer x y z Cx Cy Cz
mm mm mm N/mm N/mm N/mm
1 1 0.00 0.00 0.00 1.00000e+000 1.00000e+000 0.00000e+000
1 1 1350.00 0.00 0.00 0.00000e+000 1.00000e+000 0.00000e+000
2 1 0.00 0.00 0.00 1.00000e+000 1.00000e+000 0.00000e+000
2 1 1350.00 0.00 0.00 0.00000e+000 1.00000e+000 0.00000e+000
This protocol was created using SJ MEPLA. Copyright 2000-2005 by SJ Software GmbH Aachen, Germany.
Project: FRAMELESS2 GLASS - GLASS 3 16-02-2024 Page: 2
Layers:
Mechanical properties:
Package layer e-mod. poiss thickn. density alpha t dT prestressing
N/mm² - mm kg/m³ 1/K K N/mm²
2 3 70000.00 0.23 8.00 2550.00 1.0000e-005 0.00 37.00
2 2 11.00 0.50 1.52 1070.00 8.0000e-005 0.00 0.00
2 1 70000.00 0.23 8.00 2550.00 1.0000e-005 0.00 37.00
1 3 70000.00 0.23 8.00 2550.00 1.0000e-005 0.00 37.00
1 2 11.00 0.50 1.52 1070.00 8.0000e-005 0.00 0.00
1 1 70000.00 0.23 8.00 2550.00 1.0000e-005 0.00 37.00
External pressure:
pressure dH (difference of height)
N/mm² m
1.01000e-001 0.0
Loads:
Face loads:
(constant distributed):
Package pressure
N/mm²
This protocol was created using SJ MEPLA. Copyright 2000-2005 by SJ Software GmbH Aachen, Germany.
Project: FRAMELESS2 GLASS - GLASS 3 16-02-2024 Page: 3
2 0.00000e+000
1 1.51000e-003
Calculation approaches:
Calculation results:
This protocol was created using SJ MEPLA. Copyright 2000-2005 by SJ Software GmbH Aachen, Germany.
Project: FRAMELESS2 GLASS - GLASS 3 16-02-2024 Page: 4
This protocol was created using SJ MEPLA. Copyright 2000-2005 by SJ Software GmbH Aachen, Germany.