Professional Documents
Culture Documents
Geometry:
Supports:
Edge supports:
from-to kind of supports
1 2 w,phi,theta : fixed - u,v : free (simply supported and clamped)
Spring supports:
----- position ---- ------------ rigidity ---------
Package layer x y z Cx Cy Cz
This protocol was created using SJ MEPLA. Copyright 2000-2005 by SJ Software GmbH Aachen, Germany.
Project: 03-JLT CASE-3 - WL-1.72kPa BACK SUPPORT 03-04-2024 Page: 2
Layers:
Mechanical properties:
Package layer e-mod. poiss thickn. density alpha t dT prestressing
N/mm² - mm kg/m³ 1/K K N/mm²
1 3 70000.00 0.23 12.00 2550.00 1.0000e-005 0.00 88.00
1 2 10.00 0.50 1.60 1070.00 8.0000e-005 0.00 0.00
1 1 70000.00 0.23 12.00 2550.00 1.0000e-005 0.00 88.00
Loads:
Face loads:
(constant distributed):
Package pressure
N/mm²
1 1.72000e-003
Dead weight:
Direction vector of gravity acceleration [9.81 m/s²]:
Vx Vy Vz
0.00000 -1.00000 0.00000
Calculation approaches:
This protocol was created using SJ MEPLA. Copyright 2000-2005 by SJ Software GmbH Aachen, Germany.
Project: 03-JLT CASE-3 - WL-1.72kPa BACK SUPPORT 03-04-2024 Page: 3
Calculation results:
Extreme values:
This protocol was created using SJ MEPLA. Copyright 2000-2005 by SJ Software GmbH Aachen, Germany.
Project: 03-JLT CASE-3 - WL-1.72kPa BACK SUPPORT 03-04-2024 Page: 4
x y stresses
mm mm N/mm²
750.00 1425.00 1.194 (max)
750.00 1485.00 -0.523 (min)
This protocol was created using SJ MEPLA. Copyright 2000-2005 by SJ Software GmbH Aachen, Germany.
Max. Displacement Contour
Max. Stress Contour-Layer 3
From the above, the maximum stress is 4.47 MPa < 73 MPa. Hence Safe
Max. Stress Contour-Layer 1
From the above, the maximum stress is 6.21 MPa < 73 MPa. Hence Safe
6
2 00
8:
1 28
AS
of es
s
e 7.1 i s l
ab
l
v er
T e
er ich
as
p wh
a x m
m e
M
r 30 S af
m o e
3 0m m enc
r m
0o 50 .H
3 = m
L/ /3
0
0 9m
= 0 0 1 .
15 >
de = m
m
tra 30
al us =
B
la ss
G
of
tion
flec
e
ed
a bl
l ow
Al
Max. Stress Contour-Layer 1