Professional Documents
Culture Documents
3 Ways Mini Electric Brass Equal-1
3 Ways Mini Electric Brass Equal-1
15
53.8
54.5
65
2
VA LV E
CR2 02 Wiring Diagram ( 2 wires control – Spring return in case of the power failure)
1, When SW is closed , the valve open. the actuator automatically Farah Capacitors
SW
power off after in place RD
POWER
2, When SW is open, the valve closed, the actuator automatically Control
Circuit
power off after in place GND
BK
* Suitable Working Voltage: AC/DC9-35V
* Exceeding the working voltage is forbidden M
Actuator Internal Chart Actuator External Chart
3
VA LV E
POWER
1, RD connect with positive, the BK & GR connect with negative RD
SW
2, SW CLOSED, the valve OPEN, the actuator automatically power off Control
GR
Circuit GND
after in place. BK
3, SW OPEN, the valve CLOSED, the actuator automatically power off M
after in place. Actuator Internal Chart Actuator External Chart
POWER
RD
1, RD& GR connect with positive, the BK connect with negative
Control
GR
2, SW CLOSED, the valve OPEN, the actuator automatically power off Circuit SW
GND
after in place BK
M
3, SW OPEN, the valve CLOSED, the actuator automatically power off
Actuator Internal Chart Actuator External Chart
after in place.
* Suitable Working Voltage: AC/DC9-35V/AC110-230V
* Exceeding the working voltage is forbidden
CLS RD
RD BK
Control OLS
1, RD & GR connected with positive, and the BK connected with GR
Circuit
negative COM
BK
2, When RD & SW connected, the valve closed, the actuator M
Actuator External
Actuator Internal Chart
automatically power off after in place , remains fully closed position Chart
3, When GR & SW connected, the valve open, the actuator automatically power off after in place, remains fully
open position
* Suitable Working Voltage: DC5V, DC12V, DC24V, AC/DC9-35V
* Exceeding the working voltage is forbidden
Farah Capacitors
POWER
1, RD connect with positive, GR connect with SW & positive RD
2, BK connect with negative Control
GR
3, When the SW of GR closed, the valve open, the actuator automatically Circuit SW GND
BK
power off after in place , remains fully closed position
M
4, When the SW of GR open, the valve closed, the actuator automatically
Actuator Internal Chart Actuator External Chart
power off after in place , remains fully open position.
* Suitable Working Voltage: DC1 2 V
* Exceeding the working voltage is forbidden
4
VA LV E
BK GND
to the controlled wiring.
SW
Control
WT
2, When the sw is closed, the valve open Circuit
M
4, Suitable working voltage:AC110v-230V5, Actuator Internal Chart Actuator External Chart
5, Exceeding the working voltage is forbidden
Circuit SW GND
valve closed, the actuator automatically power off afterin place BK
M
2, BK connect with positive, the RD connect with negative, the Open
* Suitable Working Voltage: DC12V,DC24V Actuator Internal Chart Actuator External Chart
M
6, BL & GY connect with the valve’s fully open signal wiring BL
Full Open Signal
7, YW & WT connect with the valve’s fully closed signal wiring. LS.1 GY
5
VA LV E
4. BL & GY connect with the valve’s fully open signal wiring LS.2 YW
Full Closed Signal
5. YW & WT connect with the valve’s fully closed signal wiring WT
Actuator Internal Chart
* Suitable Working Voltage:DC5V, DC12V, DC24V, AC/DC9-35V Actuator External Chart
RD POWER
SW
1, RD& GR connect with positive, the BK connect with negative Control
GR
Circuit GND
2, SW CLOSED, the valve OPEN, the actuator automatically BK
M
power off after in place BL
Full Open Signal
3, SW OPEN, the valve CLOSED, the actuator automatically LS.1 GY