Professional Documents
Culture Documents
Ambient conditions:
Installation altitude at height above sea level 2 000 m
maximum
Ambient temperature
● during operation -20 ... +60 °C
● during storage -50 ... +80 °C
● during transport -50 ... +80 °C
Temperature compensation -20 ... +60 °C
Relative humidity during operation 10 ... 95 %
Main circuit:
Number of poles for main current circuit 3
Adjustable response value current of the current- 2.2 ... 3.2 A
dependent overload release
Operating voltage
● Rated value 690 V
● at AC-3 Rated value maximum 690 V
Operating frequency Rated value 50 ... 60 Hz
Operating current Rated value 3.2 A
Operating current
● at AC-3
— at 400 V Rated value 3.2 A
Operating power
● at AC-3
— at 230 V Rated value 550 W
— at 400 V Rated value 1 100 W
— at 500 V Rated value 1 500 W
— at 690 V Rated value 2 200 W
Operating frequency
● at AC-3 maximum 15 1/h
Auxiliary circuit:
Number of NC contacts
● for auxiliary contacts 0
Number of NO contacts
● for auxiliary contacts 0
Number of CO contacts
UL/CSA ratings:
Full-load current (FLA) for three-phase AC motor
● at 480 V Rated value 3.2 A
● at 600 V Rated value 3.2 A
yielded mechanical performance [hp]
● for single-phase AC motor
— at 110/120 V Rated value 0.1 hp
— at 230 V Rated value 0.25 hp
● for three-phase AC motor
— at 200/208 V Rated value 0.5 hp
— at 220/230 V Rated value 0.75 hp
— at 460/480 V Rated value 1.5 hp
— at 575/600 V Rated value 2 hp
Short-circuit protection
Design of the short-circuit trip magnetic
Connections/ Terminals:
Product function
● removable terminal for auxiliary and control No
circuit
Type of electrical connection
● for main current circuit screw-type terminals
Arrangement of electrical connectors for main current Top and bottom
circuit
Type of connectable conductor cross-section
● for main contacts
— single or multi-stranded 2x (1 ... 2,5 mm²), 2x (2,5 ... 10 mm²)
— finely stranded with core end processing 2x (1 ... 2.5 mm²), 2x (2.5 ... 6 mm²), 1x 10 mm²
● for AWG conductors for main contacts 2x (16 ... 12), 2x (14 ... 8)
Tightening torque
● for main contacts with screw-type terminals 2 ... 2.5 N·m
Design of screwdriver shaft Diameter 5 to 6 mm
Design of the thread of the connection screw
● for main contacts M4
Certificates/ approvals:
General Product Approval For use in
hazardous
locations
KTL
Shipping Approval
Further information
45 96.9
49
97