Professional Documents
Culture Documents
Retro-reflecting
1.1 O1 – O4 UN R3.02
devices
Illumination of rear
1.2 O1 – O4 UN R4.00
registration plates
Electromagnetic
1.5 O1 – O4 UN R10.04
compatibility
Prevention of Fire
1.10 O1 – O4 UN R34.02
risk
Installation of lighting
1.11 and light-signaling O1 – O4 UN R48.03 / 0.5
devices
Tyres for commercial
1.12 vehicles and their O1 – O4 R54.00
trailers
Rear under run
1.13 protective devices O1 – O4 UN R58.02
(RUPDs)
Lateral protection
1.14 O3,O4 UN R73.01
devices
Handling and stability
1.15 O1 – O4 UN R111.00
of vehicles*
Tyres, rolling
1.16 resistance, rolling O1 – O4 UN R117.02
noise and wet grip
Identification of
1.17 controls, tell-tales and O1 – O4 UN R121.00
indicators
1
National Acceptance Actual
Item Vehicle Date of
Subject (Construction & Use Compliance
No. Category Approval
Rules 1959) (Performance)
2.0 If Any Requirement UN Regulations
Special Warning
2.4 O1 – O4 UN R65.00
Lamps
Rear marking plates
2.5 for slow-moving O1 – O4 UN R69.01
vehicles
Rear marking Plates
2.6 for Heavy and Long O1 – O4 UN R70.01
Vehicle
Replacement braking
2.7 O1 – O4 UN R90.02
parts (After market)
Close Coupling
2.9 O3 – O4 UN R102.00
Device (CCD)*
Retro-reflective
2.10 O2 – O4 UN R104.00
Markings
Vehicle for the
2.11 Carriage of O1 – O4 UN R105.05
Dangerous Goods
Retreaded tyres for
2.12 passenger cars and O1 – O2 UN R108.00
their trailers
Retreaded tyres for
2.13 O3 – O4
commercial vehicles UN R109.00
and their trailers
SCHEDULE II
2
APPLICATION FOR TYPE APPROVAL OF MOTOR VEHICLE (O
– Category)
Reference No :
Date of submission.
__________________________________
__________________________________
__________________________________
__________________________________
__________________________________
2. Maker : ______________________
__________________________________
4. Country of manufacture
__________________________________
5. Proposed usage
__________________________________
3
(*) Please state/specify performance standard
according to MS/UNR/FMVSS.
1. Dimensions
i. Unladen
_____________________
ii. Fully laden
_____________________
(f) Width Track (mm)
i. Front axles
_____________________
ii. Rear axles
_____________________
i. Front end
_____________________
ii. Rear end
_______________________
i. Kerb to kerb
______________________
ii. Body to body
______________________
(j) Gravity height (mm)
______________________
2. Weight
4
(a) Kerb Weight (kg)
i. Front axles
________________________
ii. Rear axles
______________________
Rear
______________________
5. Running system
5
(i) Front wheel
___________________
(ii) Rear wheel
___________________
(iii) Spare wheel
___________________
6. Suspension system
(a) Front axle
6
___________________
(vii) Number of auxiliary spring
____________________
(b) Rear axle
(i) Type
-Axle 1
___________________
-Axle 2
___________________
-Axle 3
___________________
(ii) Size of brake
___________________
(iii) Control system and
No. of braking wheel
___________________
(iv) Brake pipes/hoses
-Material
___________________
(v) Booster
-Type
___________________
-Magnification
___________________
7
(i) Type
___________________
(ii) Braking efficiency
-Front
___________________
-Rear
___________________
8. Chassis frame
(a) Type
__________________
(b) Cross section dimension
__________________
(c) Type of material
__________________
(d) Type of side protection device
__________________
(e) Sample of chassis code number
___________________
9. Body
(a) Type
__________________
(d) Any back protection device
__________________
8
(c) Tail lamps
(ii) Type
___________________
(a) ________________________
(b) ________________________
(c) ________________________
(d) ________________________
Date:
(Signature)
Name:
Position: