Professional Documents
Culture Documents
Microbiology Lab Work
Microbiology Lab Work
Day 1:
Media Preparation
For media preparation, we used 2.8g of agar in
100ml of water
For this, we weighed the agar on a balance and then
we put it in the flask
After that, we added water (100ml) in the flask
The flask was autoclaved at 121°C
Sample Collection of face flora
By using the sample sticks, we collected bacteria
from the face of our two members
The sample sticks were then spread on the petri
dishes in a microbiology safety cabinet
Then, these dishes were incubated overnight
On the next day, colonies of bacteria were observed
on the plates
Day 2:
Streaking
On day 2, we performed streaking.
Procedure
We used the T-Streak pattern for the dilution of our
bacterial culture concentration.
First, we marked a distinct colony on the petri dish
and then picked it up by using a sterile loop.
After that, we streaked the colony on another petri
dish containing the solidified agar.
The whole petri dish was covered by primary,
secondary, tertiary and quaternary streaks.
In the end, we incubated our sample dishes
overnight.
Day 3:
Preparation of Soap Solution
In order to observe the zones of inhibition of
bacteria on our prepared petri dishes, we prepared
the different varieties of antibacterial and normal
soap solutions.
The soaps which we used were Safeguard, Garnier
face wash, Dove, _______.
We made a 0.1% solution by dissolving 1g of each
soap in 10 ml of distilled water in separate
graduated cylinders.
Then the tubes were slightly shaken to dissolve the
soaps.
After that, the different soap mixtures were
transferred to separate flasks.
The mouths of flasks were then covered with
aluminum foils and the flasks were labelled with the
soap names.
Then they were put in the Shaker for complete
dissolution of soap for about 24 hours.