You are on page 1of 4

Agriculture Statistics Objective Questions

MCQ 8. The range of multiple correlation


coefficients lies between–
1. Which measure of central tendency is
especially suited in the field of business? (A) 0 to + 1✓ (B) -1 to + 1
(C) 0 to 00 (D) - 00 to + 00
(A) Median (B) Arithmetic mean
(C) Harmonic mean (D) Mode✓ 9. The repetition of the treatment under
investigation is known as–
2. Unitless measure of dispersion is–
(A) Randomization (B) Replication✓
(A) Standard deviation (B) Mean deviation (C) Local control (D) None of these
(C) Range (D) CV✓
10. Select the most appropriate design when
3. The hypothesis of no difference is known all factors are not of equal importance in
as– experimentation–

(A) Simple hypothesis (B) Null hypothesis✓ (A) Augmented (B) Strip plot design
(C) Composite hypothesis (D) Alternative (C) LSD (D) Split plot design✓
hypothesis
11. The range of correlation coefficient lies
4. How many treatments can be adopted for between–
LSD–
(A) -1 to + 1✓ (B) 0 to 1
(A) 5 to 8 (B) 5 to 12 (C) 0 to 00 (D) 0 to 100
(C) Both (A) & (B)✓ (D) Not estimated
12. Indian Agricultural Statistical Research
5. The completely randomized design is Institute is established at
appropriate when the experimental material is–
(A) Lucknow (B) Jaipur
(A) Limited and homogenous✓ (B) (C) New Delhi✓ (D) Kolkata
Unlimited and heterogeneous
(C) Limited and heterogeneous (D) Unlimited 13. The accuracy or a measurement signifies
and homogenous the closeness with which an estimate
approaches the–
6. When the fertility gradient of the field is in
one direction, which design is appropriate– (A) True value✓ (B) Average value
(C) Both (A) and (B) (D) None of these
(A) CRD (B) LSD
(C) RBD✓ (D) SPD 14. Which design is most appropriate for
laboratory experiments?
7. The principle of making use of greater
homogeneity in groups of experimental units (A) CRBD (B) CRD
to reduce experimental error is .referred as (C) LSD✓ (D) Factorial RBD

(A) Replication (B) Randomization 15. Which test is applied for the test of
(C) Local control✓ (D) None of these significance between the two variances–
(A) t-test (B) z-test independent samples is–
(C) X2- test (D) F- test✓ (A) t-test (B) z - test
(C) F - test (D) Mann - Whitney U - test✓
16. A measure of the peakedness or convexity
of a curve is known as– 24. The variation due to uncontrolled factors is
spoken as–
(A) Skewness (B) Kurtosis✓
(C) Ogive (D) Histogram (A) Standard error (B) Experimental error✓
(C) Treatment effects (D) All of these
17. When the experimental material is very
less and the number of genotypes are very 25. Comparison of several independent
large, which design is most suited– samples is tested by–

(A) Split plot design (B) LSD (A) Quade test (B) Friedmann test
(C) RED (D) Augmented design✓ (C) Wilcoxon Signed-rank test (D) Kruskal-
Wallis H test✓
18. The R rank correlation was suggested by–
26. If there are 5 treatments with 4 replication
(A) James Bernoulli (B) SD Poisson to each, the error degree of freedom for C R D
(C) C Spearman✓ (D) Laplace and Gauss will be–

19. The correlation coefficient remains (A) 15✓ (B) 20


unaffected by the change of– (C) 12 (D) 9

(A) Origin (B) Scale 27. When the value of the correlation
(C) Both (A) & (B)✓ (D) None of these coefficient is then two variables are

(A) Uncorrelated (B) Partially correlated


(C) Perfectly correlated✓ (D) Highly
20. For X2 test no theoretical cell frequency Correlated
should be small, it should be at least–
28. Which measure of central tendency is
(A) 2 (B) 5✓ appropriate for index numbers?
(C) 8 (D) 12
(A) Harmonic mean (B) Arithmetic mean
21. The minimum error degree of freedom (C) Mode (D) Geometric mean✓
should be at least–
(A) 6 (B) 12✓ 29. Crop cutting survey on sugarcane
(C) 18 (D) 20 recommended the plot size for estimation of
crop yield is–
22. The ogive is a method of–
(A) 20 m x 10 m (B) 10 m x 10 m
(A) Diagrammatic representation (B) (C) 10 m x 5 m (D) 5 m x 5 m✓
Graphical representation✓
(C) Both (A) and (B) (D) None of these 30. If there are 6 levels of moisture regime and
6 replications each, the error degree of
23. The non-parametric test used for two freedom for LSD will be–
(A) 25 (B) 35
(C) 36 (D) 20✓ 38. The critical difference (CD) is a form of t-
test and its formula is given by–
31. For test of goodness of fit, which statistical (A) CD=t.SE(D)✓ (B) CD=t+SE(D)
test is applied– (C) CD=t/SE(D) (D) CD=F.SE(D)

(A) X 2_ test✓ (B) F - test 39. The X2 (chi-square) test for goodness of
(C) z - test (D) ~ - test fit and independence of attributes come under–

32. In confounding, generally which order of (A) Parametric tests (B) Non - parametric
interactions is confounded– test✓
(C) Both (A) and (B) (D) Not classified
(A) Lower order (B) First order
(C) Higher order✓ (D) All of these 40. When we want to conduct an experiment
on a long strip of land, which design will be
33. Student's t-test is used when the sample preferred–
size is and population standard deviation is not
known– (A) RBD (B) CRD
(C) SPD (D) LSD✓
(A) Large (B) Small✓
(C) Both (D) None of these 41. The curves which are very highly peaked
and have a value of b2 > 3 are called–
34. The statistical procedure for estimating
whether the difference under study is (A) Mesokurtic (B) Leptokurtic✓
significant or non-significant is known as– (C) Platykurtic (D) All of these

(A) Test of significance✓ (B) Standard error 42. If all the variate values are the same (e.g.
(C) Level of significance (D) Sampling 8,8,8), the standard deviation will be–

35. A normal distribution is due to the work (A) 4 (B) 8


of– (C) 16 (D) 0✓

(A) James Bernoulli (B) SD Poisson 43. Which measure of central tendency is
(C) Laplace and Gauss (D) Demoivre✓ applied for calculation of regression and
correlation coefficient?
36. The square of the standard deviation is
known as the– (A) Arithmetic mean✓ (B) Mode
(C) Median (D) Geometric mean
(A) Variance✓ (B) Standard deviation
(C) Mean deviation (D) Coefficient of 44. When statistics are used in plural sense it
variance means–

37. Indian Livestock after every Census is (A) Statistical methods (B) Collect
conducted– statistics✓
(C) Both (A) and (B) (D) None of the these
(A) 2 years (B) 5 years✓
(C) 10 years (D) 20 years
45. Who is considered as father of statistics?

(A) RA Fisher✓ (B) Pearson


(C) AL Bowley (D) Boddington

46. When we want an average of rates of


change or ratios or index numbers, which
measure of central tendency is suitable–

(A) Geometric mean✓ (B) Mode


(C) Arithmetic mean (D) Median

47. Which type of average would be suitable


to calculate the size of agricultural holding–

(A) Mode✓ (B) Median


(C) Weighted HM (D) Weighed AM

48. The intelligence, ability, or efficiency can


be measured by the use of–

(A) Median✓ (B) Mode


(C) Weighted HM (D) Geometric mean

49. The geometric mean of a given series is


always less than its–
(A) Harmonic mean (B) Weighted mean

(C) Arithmetic mean✓ (D) Weighed


harmonic mean

50. The variance is the square of

(A) Mean deviation (B) Standard


deviation✓
(C) Range (D) Correlation

You might also like