Professional Documents
Culture Documents
Lab 1 - Jessica Dufour
Lab 1 - Jessica Dufour
Laboratory Report
Course #: ELEC-2365L
Process Controls 2
Jessica Dufour
0259164
We first used the diagram and wired in the process variable and final
control element into the controller. We made sure the flow of air was
established before turning the heating element on.
This was the first time me and my partner used the ControlMaster CM30
and it took some trial and error getting the controller set up correctly.
We got experience using a SCR Phase angle controller. The SCR accepts
a 4-20mA output from the temperature controller.
This lab was done before the class explanation of how to use the
ControlMaster CM30 so a lot of the lab was us learning how to use the
CM30 (We set parameters, deadtime, gain and watched the values
depending on PV)