Professional Documents
Culture Documents
1. Switch off the remote control’s button circled in yellow color in the following photo, then turn
off the power supply for the wireless signal receiver.
2. Open the cover for the receiver board in the receiver. Please be well noted that every switch
position of one machine is different from the other. But it should be exactly same as the one in
the signal emission board.
Receiver board
Switch button
(Current board only has 4 switches)
3. Open the cover of the remote control for the signal emission board, and adjust every switch
button to the same position of the receiver board.
Emission board
4. Switch on the remote control’s button (circled in yellow in the first photo) in the control panel,
then turn on the power supply of the wireless signal receiver.
Attention: If there are more than one machines in the same working place, please be sure
the switch positions setting should be different from every machine.