Professional Documents
Culture Documents
PROCUREMENT DRAWINGS
SPECIFICATION DCS/PLC Address INSTALLATION
Item No. Asset No. Process Unit Serial No. Signal Input Range P.O. No. Reqd. Wiring Loop Sht.
Form No Status/ Function/Type Location Signal Output Units Spec. No. Prom. Install Piping
Group Name Phase Loop Descriptor Supplier Supply Set Point Cost Recd. Plant Loc. P & ID
Tag Number Manufacturer Model Number PLC/DCS Address Mounting Wiring Calibration
Service Equip/Pipe Line/Vessel No. Equip/Pipe Line/Vessel No. Description Process Stream Fed From Accpt. Deviation %
Print Date: 21-Apr-2003 Licensed to: Megaflex, Inc. © 2001 ISA Form No. 20L1001
Tag Number: PDIT-27011-2
6 SPECIFICATION IDENTIFICATIONS
MAGNETIC FLOWMETER 7 Document No.
Unit: PROJNO w/wo INTEGRAL TOTALIZER INDICATOR 8 Latest Revision Date:
Unit Name: THIS IS A SAMPLE PROJECT Device Specification 9 Issue Status
Enterprise: THIS IS CLIENT NAME 9.1 Purchase Order No.
10
11 FLOWMETER BODY 60 TOTALIZER INDICATOR
12 Body type flanged-short form 61 Totalizer type forward total/Batch
13 Flow tube style manufacturer standard 62 Enclosure type no/class NA
14 End conn nominal size 1/2 in Rating: cl 125 63 Signal power source line 115 V(ac) 60 Hz
15 End conn termn type coupling Style: NPT(M) 64 Contacts arrangement NA Quantity: 1
16 Flow tube diameter .040 in Thickness: sched 10 65 Totalizer reset style local only
17 Hardware mounting kit flange w/bolting 66 Integral indicator style LCD 2X16 character
18 Flow tube material 303 SST 67 Cert/Approval type FM Non-incendive
19 Lining material ETFE (tefzel) 68 Mounting location/type integral w/transmitter
20 End termination material 304 SST 69 Enclosure material low-copper aluminum
21 Gnd/Protective ring matl hastelloy B 70
22 71 PERFORMANCE CHARACTERISTICS
23 72 Min press at design temp 26 psia At: 100 °F
24 END EXTENSIONS 73 Max press at design temp 300 psig At: °F
25 End conn termn style bonding Style: barbed 74 Min working temperature °F Max: 140 °F
26 Bolting material manufacturer standard 75 Accuracy rating 1.0 Ref:
27 End termination material carbon steel 76 Min Velocity URL 3.0 ft/s Max: 10
28 Gasket/O-ring material EDPM (Ethylene propylene) 77 Min liquid conductivity 2 uS/cm
29 78 Output signal damping LRL 1.0 s URL: 49.9 s
30 SENSING ELEMENT 79 Min ambient working temp °F Max: 140 °F
31 Electrode type conical 80 Contacts ac rating A At Max: V
32 Insertion length 3.50 in 81 Contacts dc rating 250 mA At Max: 28 V
33 Electrode material 316 SST 82 Max sensor to receiver lg ft
34 83
35 COILS AND HOUSING 84
36 Housing construction type general purpose enclosure 85
37 Coil conn arrangement parallel 86 ACCESSORIES
38 Enclosure type no/class 4 87 Connecting cables length 10 ft
39 Signal power source line 120 V(ac) 50 Hz 88 Cable glands heyco
40 Signal termination type screw terminals 89 Ultrasonic cleaner style continuous
41 Cert/Approval type CSA Hazardous Y purge 90 Empty tube detector NA
42 Housing material chrome-moly steel 91 Calibrator adapter NA
43 92 Calibrator/configurator 120/240 V 60Hz calibrator
44 93
45 TRANSMITTER OR CONVERTER 94 SPECIAL REQUIREMENTS
46 Housing type general purpose enclosure 95 Custom tag sst permanent attached
47 Output signal type analog current & freq 96 Reference specification NA
48 Enclosure type no/class 1 97 Compliance standard USDA
49 Characteristic curve linear with flow mass 98 Calibration report NA
50 Digital communication std RS232C binary/ASCII 99 Software configuration custom
51 Signal power source line 100 V(ac) 50 Hz 100
52 Failsafe style drive output high 101 PHYSICAL DATA
53 Integral indicator style LCD 2X16 character 102 Estimated weight kg
54 Signal termination type terminal block 103 Face-to-face dimension in
55 Cert/Approval type CENELEC Non-classified 104 Overall height in
56 Mounting location/type integral to flow tube 105 Removal clearance in
57 Failure/Diagnostic action drives output low 106 Signal conn nominal size 1/2 in Style: NPT(F)
58 Enclosure material low-copper aluminum 107 Mfr reference dwg NA
59 108
110 CALIBRATIONS AND TEST INPUT OR TEST OUTPUT OR SCALE
111 TAG NO/FUNCTION IDENT MEAS/SIGNAL/TEST LRV URV Units ACTION LRV URV Units
112 PDIT-27011-2 Flow rate-Analog output 0 galUS/min reverse 20
113 Flow rate-Digital output 0 galUS/min direct 0
114 Flow rate-Freq output 0 galUS/min direct 0
115 Flow rate-Scale 0 galUS/min direct 100
116 Test pressure psig
117
118 COMPONENT IDENTIFICATIONS
119 COMPONENT TYPE MANUFACTURER MODEL NUMBER
120
121
122
123
124
125
Rev Date Revision Description By Appv1 Appv2 Appv3 REMARKS
Print Date: 22-Oct-2002 Licensed to: Megaflex, Inc. © 2001 ISA Form No. 20F2321
Sample Specification Format
1981 ISA Standards
Spec No.: Rev.No.:
Notes:
Operating
Rev. Quan. Tag No. Range Units Pressure
Service
LSL-27011
AHU FLOW MONITORING STATION
SCX-27015
AHU CONTROLLER
Print Date:06-Oct-02 Licensed to: Megaflex, Inc. © 1995-2000 ISA, All Rights Reserved
ISA FORM S20.41b
FIT-102-01 Page: 1
TURBINE FLOWMETER
12 Materials: Body
1 Tag Number FIT-102-01 13 Support
2 Service 14 Shaft
Notes:
Print Date: 04-Sep-02 Licensed to: Megaflex, Inc. © 1995-2000 ISA, All Rights Reserved
FT-27013-2 Page: 2
TURBINE FLOWMETER
12 Materials: Body
1 Tag Number FT-27013-2 13 Support
2 Service 14 Shaft
11 Excitation 24VDC
24 Fluid AIR 30 Operating Specific Gravity
25 Flow Rate: Min. Max. 31 Viscosity Range
FLUID
26 Normal Flow 32 Percent Solids & Type
DATA 27 Operating Pressure 33
28 Back Pressure
46 49 Manufacturer ASHCROFT
50 Meter Model No.
47
XL-5-MB2-42-ST-2P5IW
Notes:
Print Date: 04-Sep-02 Licensed to: Megaflex, Inc. © 1995-2000 ISA, All Rights Reserved
SCX-27011-2 Page: 1
Spec No.: 17212A Rev.No.:
RUPTURE DISK
1 Tag Number SCX-27011-2 3 Line No./Vessel No.
Notes:
Print Date:09-Sep-02 Licensed to: Megaflex, Inc. © 1995-2000 ISA, All Rights Reserved
Create Date: 16-Sep-1997 Rev. No. page: 1 028-TIT-0601
Model No.:
Manufacturer:
INSTRUMENT SPECIFICATION
By: Chk'd: Appr'd:
06 Special Coat: 41
07 Electrical Classification: 42
08 Intrinsic Safe: 43
09 44
10 45
ELEMENT
11 Type/Material: 46
12 Diaphragm Material: 47
13 Wet Parts Material: 48
14 Sensor Fill Fluid: 49
15 Range Limits: 50
16 Span Limits: 51
17 Accuracy: 52
18 Repeatabililty: 53
19 Zero Elevation: 54
20 Zero Suppression: 55
21 Adjustable Damp: 56
22 57
23 58
24 59
25 60
26 61
27 62
28 63
29 64
30 65
31 66
32 67
33 68
34 69
35 70
Notes:
Print Date: 21-Apr-2003 Licensed to: Megaflex, Inc. © 1996-2002 MegaFlex, Inc., All Rights Reserved
Sample Preventive
Maintenance Forms and
Calibration Line Graph
Megaflex, Inc. TAG Number: GT-0059
Service Desc:
Model Number:
Manufacturer: 4/11/2003 Location:
Supply:
Signal Input: Signal Output: Set Point
Range: Units of Measure:
Serial Number: Address:
Process_Fluid: Pipe Line No:
P & ID Number: 0062
4%
3%
% Deviation
2%
1%
00 %
00 % 10 % 20 % 30 % 40 % 50 % 60 % 70 % 80 % 90 % 100 %
% of Input
0.8
Instrument
Count
0.6
0.4
0.2
0
0.0
1
COGEN PLANT NAME Due For Service: 1 Total Instruments: 1 Percent Complete: 0.00%
0.8
Instrument
Count
0.6
0.4
0.2
0
0.0
1
NEWCOGEN CO-GENERATION PLANT Due For Service: 1 Total Instruments: 1 Percent Complete: 0.00%
0.8
Instrument
Count
0.6
0.4
0.2
0
0.0
1
OXYCHEMCO OXYCHEM CO-GEN PLANT Due For Service: 1 Total Instruments: 1 Percent Complete: 0.00%
1 1
Count
1.0
0.5
0.0
1
Due Service - Service Complete - Total Instruments
PROJNO THIS IS A SAMPLE PROJECT Due For Service: 1 Total Instruments: 2 Percent Complete: 50.00%
3
Count
2
1
1
0
4
-4- 0.000
-5- 0.000
Calibration Procedures No.: Last Service Date: 18-Apr-02 Days Since Last Service: 179 Delta(days): 149
Programmed Service Interval(days): 30 Not To Exceed (Days): 60 Days Remaining to Service: -89
Service Start Date: 18-Apr-02 Next Service Due: 18-May-02 No Later Than: 17-Jul-02
-4- 0.000
-5- 0.000
Calibration Procedures No.: 1.5 Last Service Date: 04-Dec-01 Days Since Last Service: 314 Delta(days): 284
Programmed Service Interval(days): 30 Not To Exceed (Days): 89 Days Remaining to Service: -195
Service Start Date: 04-Dec-01 Next Service Due: 03-Jan-02 No Later Than: 02-Apr-02
1. Cable Terminations Checked (enter cable numbers)....
a. _______________
b. _______________
c. _______________
d. _______________
e. _______________
Positions %-----Input--------Output------Input--------Output-------Input-------Output
__________|________|__________|________|_________|________|__________|
__________|________|__________|________|_________|________|__________|
__________|________|__________|________|_________|________|__________|
__________|________|__________|________|_________|________|__________|
__________|________|__________|________|_________|________|__________|
__________|________|__________|________|_________|________|__________|
__________|________|__________|________|_________|________|__________|
Comments:____________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________