This document provides testing requirements for dielectric properties of materials based on insulation voltage and impulse voltage. It specifies that power-frequency withstand voltage should be based on Table-8, impulse withstand voltage should be tested at 5 times each polarity based on Table-10, and the testing of enclosures and external operating handles made of insulating materials should be at 1.5 times the values indicated in Table-8.
This document provides testing requirements for dielectric properties of materials based on insulation voltage and impulse voltage. It specifies that power-frequency withstand voltage should be based on Table-8, impulse withstand voltage should be tested at 5 times each polarity based on Table-10, and the testing of enclosures and external operating handles made of insulating materials should be at 1.5 times the values indicated in Table-8.
This document provides testing requirements for dielectric properties of materials based on insulation voltage and impulse voltage. It specifies that power-frequency withstand voltage should be based on Table-8, impulse withstand voltage should be tested at 5 times each polarity based on Table-10, and the testing of enclosures and external operating handles made of insulating materials should be at 1.5 times the values indicated in Table-8.