Professional Documents
Culture Documents
SOLAPUR.
Mechanical Engineering Department Roll No:
Mid Sem Examination
Subject – TOM-II Subject Code:-BTMC503 (T.E. A & B )
Date: 10/10/2023 Time: - 10.30pm to 12.30pm Max. Marks: 30M
Q.1 Attempt any two from the following: (2x5 =10) Level
A Write advantages of V belt over Flat belt belt. Remember/ CO1
C A shaft runs at 80 rpm and drives another shaft at 150 rpm Apply/ CO1
through the belt drive. The diameter of the driving pulley is
600 mm. Determine the diameter of the driven pulley in
following cases i) neglecting belt thickness, ii) taking belt
thickness as 5 mm & iii) belt thickness as 5mm and total slip of
4%.
Q.3 Attempt any two from the following: (2x5 =10)
C A pinion having 30 teeth drives a gear having 80 teeth. The Apply/ CO2
profile of the gear is involute with 20° pressure angle, 12 mm
module and 10 mm addendum. Calculate the length of path of
contact and arc of contact.