Professional Documents
Culture Documents
OF YOUR
256, GIDC, Industrial Estate, Waghodia – 391760, Dist. Vadodara, Gujarat, India
MICRONSIL 30C
MICRONSIL 30C PLUS
METAKRETE
NANOSIL
TIGERSIL
CRACKSIL
RAINBOSIL
ROADSIL
APPLICATION HOW TO USE BENEFITS
• Wall plaster for Internal/External • For Plaster on Wall (Brick/Light Weight Block) • Only 2 days curing process required, saving on cost of water, power and labour
• IPS Micronsil 30C (15 kg) + 50 kg Cement + 300 kg • Reduced temperature of walls and ceiling upto 3OC
Sand • Provides moisture free wall, plaster and mortar
• PPC
• No additional cement requirement for polishing
• Flooring Plaster • For Plaster on RCC Wall, RCC Column & RCC Beam • Reduces load of Slab / Terrace
MICRONSIL 30C
Sand
METAKRETE
• 10% saving on re-bounce material
RAINBOSIL
CRACKSIL
NANOSIL
TIGERSIL
ROADSIL
• Environment friendly
• No efflorescence (salt)
PHYSICAL PROPERTIES
MICRONSIL
PROPERTIES UNITS
30C
Brightness % 45 - 55
pH (10%AQ.SLURRY) - 8 - 10
10 kg
PACKING
METAKRETE
• Any kind of running water & leakages can stop by Micronsil 30C Plus
RAINBOSIL
CRACKSIL
NANOSIL
TIGERSIL
ROADSIL
(IPS means Cement + Sand + Grit)
Micronsil 30C Plus (20 kg) + 50 kg Cement + 200 kg
Sand + 200 kg Grit
METAKRETE
NANOSIL
TIGERSIL
CRACKSIL
RAINBOSIL
ROADSIL
APPLICATION HOW TO USE BENEFITS
• High performance, high strength, • Add 4 kg Metakrete (8%) with 50 kg cement • Increasing compressive and flexural strength
lightweight concrete bag. Ideal for beam, column and slabs • Providing resistance to chemical attack
• Industrial-commerical floor, marine • Reducing permeability substantially
concrete, precast concrete • Preventing alkali-silica reaction.
• Shotcreting, mortars, stuccos, pool • Reducing efflorescence and shrinkage
plaster etc • Prevent from alkaline & acidic attack
• Fiber cement and ferro cement
METAKRETE
RAINBOSIL
CRACKSIL
NANOSIL
TIGERSIL
ROADSIL
products
• Glass fiber reinforced concrete
PHYSICAL PROPERTIES
PROPERTIES UNITS METAKRETE
ROADSIL
PACKING
• 1 litre
• 5 litre
• 20 litre
• 50 litre
APPLICATION HOW TO USE BENEFITS
• Nanosil can apply on any surface such • Clean the surface • Hydrophobic
as • Apply with brush/spray/Roller one vertical & • UV resistant
horizontal coat at same time on surface • IR resistant
• Internal/External plaster wall • Allow it to cure for 4 hours • No need to apply primer
• Internal/External concrete wall • Reduces heat conductivity
• On Bricks, Marble, Wood, PVC Pipe, NANOSIL + PAINT APPLICATION • Solvent free and low VOC
RAINBOSIL
CRACKSIL
NANOSIL
TIGERSIL
ROADSIL
FRP Sheet, Cement Sheet, GI Sheet, etc. • Can be apply on any surface
• Clean/wash the surface properly
• On terrace any surface such as,
• If any cracks found, Fill cracks with cracksil
China Mosaic, RCC, PCC, Tiling, etc. PHYSICAL PROPERTIES
• Apply first coat of Nanosil
• After 4 hours, Mix 4 litre Paint + 1.5 Litre Nanosil PROPERTIES UNITS
& apply horizontal coat on surface, Once dry Appearance Milky, white
apply vertical coat Density (25 °C) approx. 1.0 g/cm³
• After dry, Apply final coat with Nanosil Diluent water Viscosity 40 - 55 sec
Specification -
TIGERSIL
CRACKSIL
RAINBOSIL
ROADSIL
APPLICATION HOW TO USE BENEFITS
• Any kind of Internal/External affected • Step 1: Clean the wall surface with grinder • Ready to use & “DO IT YOURSELF” product
areas for Salt, Mold, Dampness, machine and remove paint & putty upto • Easy to apply on wall without removing plaster or to damage wall
Paintpeel off plaster level • Technical waterproofing application skill is not required
• Resolves Paintpeel off, Salts, Molds, and Dampness from the wall & stops it
• Step 2: Mix 1 litre of Tigersil with powder
from recurring
0.5 kg (Proportion of 1: 05, Tigersil: Powder)
RAINBOSIL
CRACKSIL
TIGERSIL
ROADSIL
• Step 3: Apply with brush on wall one single
coat vertically & horizontally
CRACKSIL
RAINBOSIL
ROADSIL
APPLICATION HOW TO USE BENEFITS
• Any kind of horizontal / vertical cracks • Clean the cracks to remove any dust, dirt, • Very strong adhesion to common building substrates
in Internal/External areas up to 5mm spillovers of oil, grease or loose particles • “DO IT YOURSELF” product
• Remove the existing POP or the PUTTY to • Non-sagging can be used for horizontal, vertical & overhead applications
expose the plaster surface • Stable in expansion & construction
• Mixing ration of crack fill powder with water • Ideal to fill up to 5mm wider static cracks
varies with respect to area of application • Single time application
RAINBOSIL
CRACKSIL
ROADSIL
• Apply Cracksil in the crack with a putty blade
or spatula effectively making sure that it is
totally filled up PHYSICAL PROPERTIES
• Allow it to cure for 24 hours
PROPERTIES UNITS CRACKSIL
Brightness % 82 - 86
RAINBOSIL
ROADSIL
®
HIGH PERFORMANCE
EPOXY GROUT FOR TILE JOINTS
RAINBOSIL
Finally clean the tile surface after 45 minutes of
ROADSIL
Mix the all components for 3-4 minutes to get joint filling to remove epoxy stain with water and
uniform paste consistency soap solution
Before application wear rubber gloves and start SPECIALLY DEVELOPED FOR
filling the tile joint
Ceramic Tiles
Vertical Tiles
®
HIGH PERFORMANCE
EPOXY GROUT FOR TILE JOINTS
RAINBOSIL
ROADSIL
Hospitals Moisture (ex-work) % 0-3
Operating theaters, clinics, showers and kitchens
Wet areas
Swimming pools, jacuzzis, bathrooms, saunas, and spas.
Others
High traffic areas (mall, podiums) garage, battery rooms, toilets and waste treatment plants
®
HIGH PERFORMANCE
EPOXY GROUT FOR TILE JOINTS
RAINBOSIL
Done STATE GREY SPECTRA PINK Done
ROADSIL
300X450X8 0.14 0.21 0.28 0.35 0.41 0.48 0.54 0.61 0.67
300X450X10 0.18 0.26 0.35 0.43 0.52 0.60 0.68 0.76 0.84
300X450X12 0.21 0.31 0.42 0.52 0.62 0.72 0.82 0.91 1.01
BRIGHT WHITE PURE WHITE
300X600X8 0.13 0.19 0.25 0.31 0.37 0.43 0.49 0.55 0.61
400X400X8 0.13 0.19 0.25 0.31 0.37 0.43 0.49 0.55 0.61
400X400X10 0.16 0.24 0.31 0.39 0.47 0.54 0.62 0.69 0.76
400X400X12 0.19 0.28 0.38 0.47 0.56 0.65 0.74 0.83 0.91 Done SAGE PARCHMENT Done
600X600X10 0.11 0.16 0.21 0.26 0.31 0.36 0.42 0.47 0.52
600X600X12 0.13 0.19 0.25 0.31 0.38 0.44 0.50 0.56 0.62
Done AQUA BLUE NATURAL GREY Done
• Clean the affected area by sweeping with a • No traffic diversion / jam unlike conventional road Adhesion
Concrete: Excellent
ROADSIL
clay, dirt and dust. • No loss of material as it instantly bonds. Initial Cure: 2 hrs @ 35°C
Cure Time
• Open the bag and Mix the given Part A and Part • Leads to very little reeling, bleeding, depressing / Final Cure: 24 hrs @ 35°C
B in bag. Apply “Roadsil” & Fill up the patches. permanent deformation. Self Life 12 Months
by leveling the surface. • Be highly resistant to stripping by water, offer high
• To get maximum durability, allow 2 hour skid resistance.
setting time after compaction. • Be highly stable at high pavement temperatures.
• Allow the traffic over the repaired area. • Offer no sticking / picking-up of material by vehicle
• Consume all the contents once the bag is tyres.
opened. • Guaranteed Time-Saving and Permanent solution.
• Ready to Use and Instant setting.
• Works in all Weather Conditions.
• Instantly ready for traffic.
• Environment Friendly Product a Go Green initiative.
OUR VALUED CUSTOMERS NOTE