You are on page 1of 2

(EE 325)

HW1

By
Dr. Eng. Omar Abdel-Gaber M. Aly
omar.aly@aun.edu.eg
Assistant Professor
Electrical Engineering Department
College of Engineering - Assiut University
Home Work No. 1,
 In designing a communication system, bandwidth efficiency is
often a top priority. In analog communications one way to get
bandwidth efficiency is to limit the bandwidth of the message
signal. The big engineering tradeoff is how narrow to make the
bandwidth of the message signal. If the bandwidth is made too
narrow the message will be distorted. If the bandwidth is made
to wide spectrum will be wasted.
 Use Matlabe to record your voice seeing “Bingo” and estimate
how small the bandwidth of a voice signal can be and still
enable high fidelity communications. There is no single or right
answer to the problem but engineering judgment must be
used. How would your answer be different if you were only
concerned with word recognition or if you wanted to maintain
speaker recognition as well. Please detail your reasons for your
solution
Analog Communication , Dr. Omar Aly 2

You might also like