Professional Documents
Culture Documents
NCIRSEM’19
— Organized by ---
(NCIRSEM’19)
P.S.V
COLLEGE OF ENGINEERING & TECHNOLOGY
(Approved by AICTE & Affiliated to Anna University, Chennai)
(Inclusion Under Section 2(F) of the UGC Act, 1956)
Chennai - Bangalore Highway, (NH46), Krishnagiri - 635 108.
Dr. S.Vivek, M.A., EDMSL (UK).,M.B.A.(UK), Ph.D.
Secretary
P.S.V.Group of Institutions
3 & 4, 2019
9
9
9
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
List of Papers
Page
S.No Title
No.
1 Energy and Efficient Communication System Using Adaptive Power Splitting Protocol 5
An Algorithm For Finding Minimum Cost Of Storing And Regenerating Data Sets In
2 5
Multiple Clouds
A Secure Erasure Code -Based Cloud Storage System With Secure Data
3 6
Forwarding
An Energy Efficient Cross-Layer Network Operation Model For Ieee 802.15.4-Based
4 6
Mobile Wireless Sensor Networks
Adaptive Avatar Handoff In The Cloudlet Network Using Mobile Edge Computing
5 7
System
6 Analysis And Specifying Text Categorization Using A Bayesian Classification Approach 8
7 A Secure Data Sharing Scheme Using Lazy Re-Encryption For Mobile Cloud Computing 8
8 Analysis Of Social Network User Mental Disorders Detection Through Online Social
9
Media Mining
9 Efficient wireless multimedia multicast in Multi-rate multi-channel mesh networks 10
14 Swing Pay: One Card Meet All User Payment And Identity Needs 12
17 Combinational Security Lock System For ATM Using Finger Print Identification 14
18 IoT Based Autonomous Vehicle With The Aid Of Computer Vision Using Rasbperry PI 14
A New Modeling Schemes For Measuring Earth Vibration Parameter And Building
19 15
Prevention System By Using Shaking Table Approach
Design Of Biometric System Based Vehicle Theft Protection System Using GSM And GPS
20 16
Communications
21 Simulation Modeling Of Inverter Controlled BLDC Drive Using Four Switch 16
Analysis of Three Phase Flyback Full Bridge PFC Boost Converters With Control Of
22 17
Switching Cycles
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
1
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
23 Device Free Occupant Activity Sensing Using Internet Of Things For Security Purpose 17
A Centralized Power Management Control Scheme for Ac And Dc Buses PV Battery-Based
24 18
Hybrid Microgrids
25 Optimal Multiphase Energy Conversion Systems with Unequal Power Sharing Capability 18
Operational Limits Of Four Leg Three Level Neutral Point Clamped Converter For Hybrid
26 19
Energy Storage System
27 Analysis Of Hybrid Load Management System 19
32 Design And Implementation Of Hybrid Solar And Wind Based Microgrid System 22
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
2
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
50 A Study On Effectiveness Of Employees Recruitment Process Among Obli Granites Pvt Ltd 31
A Study On Effectiveness Of Performance Appraisal In Thangavelu Textiles Private
51 31
Limited, Salem
52 A Study On Industrial Relation Among Prs Tyres In Nammakkal 32
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
3
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
4
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
An Algorithm for Finding Minimum Cost Of Storing and Regenerating Data Sets In
Multiple Clouds
MAYAVATHI.M., M.E (CSE)
Mr.B.SAKTHIVEL M.E. (Ph.D) Associate Professor/Head
P.S.V College of Engineering and Technology
Abstract
The proliferation of cloud computing allows users to flexibly store, re-compute or
transfer large generated datasets with multiple cloud service providers. However, due to
the pay-as-you-go model, the total cost of using cloud services depends on the
consumption of storage, computation and bandwidth resources which are three key
factors for the cost of IaaS-based cloud resources. In order to reduce the total cost for
data, given cloud service providers with different pricing models on their resources,
users can flexibly choose a cloud service to store a generated dataset, or delete it and
choose a cloud service to regenerate it whenever reused. However, finding the
minimum cost is a complicated yet unsolved problem. In this paper, we propose a novel
algorithm that can calculate the minimum cost for storing and regenerating datasets in
clouds, i.e., whether datasets should be stored or deleted, and furthermore where to
store or to regenerate whenever they are reused. This minimum cost also achieves the
best trade-off among computation, storage and bandwidth costs in multiple clouds.
Comprehensive analysis and rigid theorems guarantee the theoretical soundness of the
paper, and general (random) simulations conducted with popular cloud service
providers' pricing models demonstrate the excellent performance of our approach.
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
5
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
A Secure Erasure Code -Based Cloud Storage System With Secure Data
Forwarding
PAVITHRA K., M.E (CSE)
Mr.C.PRAKASH NARAYANAN., M.E (CSE) Assistant Professor
P.S.V College of Engineering and Technology
Abstract
A cloud storage system, consisting of a collection of storage servers,
provides long-term storage services over the Internet. Storing data in a third
party’s cloud system causes serious concern over data confidentiality. General
encryption schemes pro tectdata confidentiality, but also limit the functionality of
the storage system because a few operations are supported over encrypted data.
Constructing a secure storage system that supports multiple functions is
challenging when the storage system is distributed and has no central authority.
We propose a threshold proxy re-encryption scheme and integrate it with a
decentralized erasure code such that a secure distributed storage system is
formulated. The distributed storage system not only supports secure and robust
data s torage and retrieval, but also lets a user forward his data in the storage
servers to another user without retrieving the data back. The main technical
contribution is that the proxy re-encryption scheme supports encoding operations
over encrypted messages as well as forwarding operations over encoded and
encrypted messages. Our method fully integrates encrypting, encoding, and
forwarding. We analyze and suggest suitable parameters for the number of copies
of a message dispatched to storage servers and the number of storage servers
queried by a key server. These parameters allow more flexible adjustment
between the number of storage servers androbustness.
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
6
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
Abstract
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
7
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
A Secure Data Sharing Scheme Using Lazy Re-Encryption For Mobile Cloud
Computing
SUGANYA.S., M.E (CSE)
Dr.S.CHANDRA SEKERAN.M.E.,Ph.D. Supervisor/Associate Professor
P.S.V College of Engineering and Technology
Abstract
With the popularity of cloud computing, mobile devices can store/retrieve
personal data from anywhere at any time. Consequently, the data security problem
in mobile cloud becomes more and more severe and prevents further development
of mobile cloud. There are substantial studies that have been conducted to improve
the cloud security. However, most of them are not applicable for mobile cloud
since mobile devices only have limited computing resources and power. Solutions
with low computational overhead are in great need for mobile cloud applications.
In this paper, we propose a lightweight data sharing scheme (LDSS) for mobile
cloud computing. It adopts CP-ABE, an access control echnology used in normal
cloud environment, but changes the structure of access control tree to make it
suitable for mobile cloud environments. LDSS moves a large portion of the
computational intensive access control tree transformation in CP-ABE from
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
8
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
Analysis of Social Network User Mental Disorders Detection through Online Social
Media Mining
Mrs. MANIMEGALAI. C., M.E (CSE)
Mr.C.PRAKASH NARAYANAN., M.E (CSE) Assistant Professor
P.S.V College of Engineering and Technology
Abstract
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
9
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
10
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
11
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
Abstract
A device for the detection of polymers is under the development. The use of
ultrasonic waves for understanding the aquatic environment is undertaken in this work.
The material presented explains how the waves behave for different samples (size, shape,
composition) of polymers. Apart from these there are e-waste and industrial effluents.
Their bio-degradability and the confusion for food for marine life has created an entry
point to food cycle of mankind. Additionally, the wastes in their solid form also inhibit
easy movement of motors that are propelling ships, submarines or motor boats. Hence
this study was undertaken to determine the ultrasound for studying shape dependency of
polymers. Automatically enable electronic detection with artificial intelligent systems
and other future enhancements required to facilitate waves for multiple orientations.
Keywords - Piezo Plates; Ultrasound; Microcontroller; Arduino; Underwater
Acoustics
Swing Pay: One Card Meet All User Payment And Identity Needs
Anupreetha T1, Prof.Sasikala M2, M.E., AP/ECE
Department of Electrical and Electronic Engineering
P.S.V College of Engineering and Technology,
Krishnagiri.
Abstract
Swing-Pay, has been presented for point-to-point transactions to eliminate all the
constraints seen in state-of-the-art payment method. Some recently developed all-in-one
payment cards like Plastic. Emerging payment technologies create both opportunities
and challenges for the future. Being a quick and convenient process, contactless payment
gained momentum, especially with merchants, with throughput being the main
parameter. This approach eliminates the need for physical cash and also serves all types
of payment and identity needs. This approach furnish a medium for cashless card-to-card
transactions. A prototype of a digital card is also detailed. This card can also be used as a
virtual identity (ID) card, accumulating the information of all ID cards, including an
electronic passport, voter ID, and driving license.
Keywords: LCD, RFID Reader, finger print sensor, matrix keypad, ATMEL
Microcontroller, GSM, Power supply.
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
12
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
Abstract
With the Linux machine, one cannot achieve line rate data processing. This is
because of the richness in Linux kernel and improper resource management with respect
to the data forwarding. Improper resource management includes interrupt-driven packet
processing, selection of data structures and memory management. With Intel DPDK
(Data Plane Development Kit), all these shortcomings can be avoided, and the Linux
machine can be used to achieve line rate data processing. DPDK is a framework that
provides a set of libraries and drivers for fast packet processing in data plane
applications. DPDK uses poll mode drivers, huge pages and data structures that are
optimized for packet processing. DPDK based fast path runs on dedicated CPU cores to
process incoming packets without incurring any of the OS overheads which degrades
overall performance. Only control packets that require complex processing are
forwarded to the control plane, which performs the necessary management, signaling
and control functions. Packet processing information that is configured or learned
through control plane protocols in Linux is automatically and continuously
synchronized with the DPDK fast path so that the presence of the fast path is completely
transparent to Linux and its applications. The idea is to develop a Virtual Network
Function (VNF) say Layer 3 router that does both IPv4 and IPv6 routing using Intel
DPDK concepts and libraries in such a way that the same application can be used in
both bare metal as well as Virtual Machine. Vector processing of packets can be used
further to increase the processing rate by many folds.
Keywords: Intel DPDK (Data Plane Development Kit), Virtual Network
Function (VNF), Fast Path Processing, User space forwarding.
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
13
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
Combinational Security Lock System For Atm Using Finger Print Identification
Nambikkai Nancy A1, Kavipriya S2 M.E., AP/ECE,
Department of Electronics and Communication Engineering
P.S.V College of Engineering and Technology
Krishnagiri
Abstract
In view of the mechanical locks used in the financial industry can no longer meet
the needs of security and reliability of banking now, this new type of ATM safe lock
system was composed of four parts which are respectively electronic combination lock
host, pin identification using one time password, finger print identification and host
computer (PC) management center. The lower computer is composed of Cortex-M3
series MB9AFB44L processor module, fingerprint identification module and 2.4G
wireless modem. Bank personnel who adds money is authorized operating authorization
by the integrated management system of upper machine, sending a signal to notify the
hand-held MCU to send packets in the authorized time after verification of hand-held
fingerprint identification module, and the packets are also passed into combination lock
host through 2.4G wireless module. When packets are received, combination lock host
will compare and extract in advance, and ID number of hand-held device will be verified
first. The contents of the packet will be extracted if the ID is meeting the permission
scope, and the unlock one time password in the package content and the authorization
record time are recorded at the moment, which is going to be matched with the password
generated by combination lock host. The host will directly drive electromagnetic
equipment to play the lock tongue if the password is correct. The whole process of
verifying the unlock password must be done within the scope of authorization time,
generally half a day or a day, which is determined by the bank unit. In addition with that
vibration control is added in advance to protect the system from theft activity .That is to
say, such a practice must be carried out within the control of management system. The
lock is verified by actual operation in the bank that it can effectively improve the security
of Bank ATM safe electronic password system, and it has a profound historical
significance to promote the development of bank ATM safe electronic combination lock
industry.
Keywords: Cortex-M3 series MB9AFB44L processor module, fingerprint
identification module and 2.4G wireless modem, vibration control.
IoT Based Autonomous Vehicle With The Aid Of Computer Vision Using
Rasbperry PI
Sathiya S , Prof. Kalaiyarasi K C2, M.E., AP/ECE
1
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
14
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
automation features like traffic light detection, obstacle avoidance system and lane
detection system so that it can drive itself safely in case of connectivity failure. The main
goal here is to minimize the risk of human life and ensure highest safety during driving.
At the same time the car will assure comfort and convenience to the controller. A
miniature car including the above features has been developed which showed optimum
performance in a simulated environment. The system mainly consists of a Raspberry Pi
and a Pi camera, a sonar module, a Web interface and Internet modem. The Raspberry
Pi was mainly used for the Computer Vision algorithms and for streaming video through
Internet. The proposed system is very cheap and very efficient in terms of automation.
Keywords: Internet of Things, Raspberry Pi, Computer Vision, Sonar Module, Pi
Camera, Machine Leaning, Python, Web Server.
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
15
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
Design of Biometric System Based Vehicle Theft Protection System Using GSM And
GPS Communications
Vasanthi V , Prof. Elavarasi R2, M.E., AP/ECE
1
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
16
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
Analysis of Three Phase Flyback Full Bridge PFC Boost Converters With Control
Of Switching Cycles
NANDHA KUMAR.V., M.E (PED)
Mrs.R.KALPANA., M.E (EEE) Assistant Professor
P.S.V College of Engineering and Technology
Abstract
A start-up scheme is proposed and investigated for a three-phase isolated full-
bridge boost power factor correction (PFC) converter with the passive fly back auxiliary
circuit. Configuration derivation in ac side of the PFC converter has been done, and the
three boost inductors are replaced by three coupled-inductors with fly back inductors. In
starting state, the PFC converter operates in fly back mode, and the charging of its
output filter capacitor can be realized with the help of the adding fly back inductors.
Operational principles of the PFC converter are discussed in both steady and starting
states. Furthermore, design considerations of the key parameters in starting state are
analyzed through comparing with the characteristics of the PFC converter in steady
state. Finally, experimental study of the proposed start-up scheme has been done on a
1.7kW laboratory-made three-phase PFC prototype, and feasibility of the presented
method and validity of the theoretical analysis are verified by the experimental results
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
17
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
18
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
Operational Limits Of Four Leg Three Level Neutral Point Clamped Converter For
Hybrid Energy Storage System
POOJA GOUDAR.M., M.E (PSE)
Mr.B.GOKULA KRISHNAN, M.E.,Phd, (EEE) Associate Professor
P P.S.V College of Engineering and Technology
Abstract
Rising demand for distributed generation based on Renewable Energy Sources
(RES) has led to several issues in the operation of utility grids. The microgrid is a
promising solution to solve these problems. A dedicated energy storage system could
contribute to a better integration of RES into the microgrid by smoothing the renewable
resource’s intermittency, improving the quality of the injected power and enabling
additional services like voltage and frequency regulation. However, due to energy/power
technological limitations, it is often necessary to use Hybrid Energy Storage Systems
(HESS). A second order sliding mode controller is proposed for the power flow control
of a HESS, using a Four Leg Three Level Neutral Point Clamped (4-Leg 3LNPC)
inverter as the only interface between the RES/HESS and the microgrid. A three-
dimensional space vector modulation and a sequence decomposition based AC side
control allows the inverter to work in unbalanced load conditions while maintaining a
balanced AC voltage at the point of common coupling. DC current harmonics caused by
unbalanced load and the NPC floating middle point voltage, together with the power
division limits are carefully addressed in this paper. The effectiveness of the proposed
technique for the HESS power flow control is compared to a classical PI control scheme
and is proven through simulations and experimentally using a 4 Leg 3LNPC prototype
on a test bench.
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
19
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
Demand Side Management (DSM).The results are presented to show the effectiveness of
the proposed method for load managementElectrical energy is a vital for feature of any
developing nation. In this project, a methodology is proposed to solve burning problem
with load management during peak hours, in case of domestic loads aiming to reduce the
gap between the demand and the supply
Analysis of Fault Control By Voltage Support And Active Power Flow Control In
Grids Using Converters
VIMAL RANI V., M.E (PSE)
Mrs.R.KALPANA., M.E (EEE) Assistant Professor
P.S.V College of Engineering and Technology
Abstract
Intelligent occupancy sensing is becoming a vital underpinning for various
emerging applications in smart homes, such as security surveillance and human behavior
analysis.However, prevailing approaches mainly rely on video camera, ambient sensors
or wearable devices, which either requires arduous deployment or arouses privacy
concerns. In this paper, we present a novel real-time, device-free and privacy-preserving
WiFi-enabled IoT platform for occupancy sensing, which can promote a myriad of
emerging applications. It is designed to achieve an optimal tradeoff between
performance and scalability. Our system empowers commercial off-the-shelf (COTS)
WiFi routers to collect Channel State Information (CSI) measurements and provides an
efficient cloud server for computing via a lightweight communication protocol. To
demonstrate the usefulness of our platform, an occupancy detection system is developed
by exploiting the CSI curve of human presence. Furthermore, we also design an
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
20
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
innovative activity recognition system based on our platform and machine learning
techniques with high availability and extensibility. In the evaluation, the experimental
results show that our platform enables these applications efficiently, with the accuracy of
96.8% and 90.6% in terms of occupancy detection and recognition respectively.
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
21
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
increases the cost. Our aim is to be design of positive output super lift converter fed DC
motor and also regulates the speed of DC motor using conventional controller.
Design and Implementation of Hybrid Solar and Wind Based Microgrid System
SANDEEP.P.K M.E (PSE)
Mr K.GOPINATH M.E. , M.E (EEE) Assistant Professor
P.S.V College of Engineering and Technology
Abstract
System efficiency and cost effectiveness are critical importance for photovoltaic
system. This paper addresses the two issues by developing a novel three port dc .dc
converter for stand-alone pv system based on improved fly back- forward topology. This
paper is focused on a comprehensive modulation strategy utilizing both pwm and phase
– shifted control that satisfies the requirement of pv power system to achieve mppt and
output voltage regulation. Generally Direct Current Machine has become a competitive
selection for many applications of electrical machine drive systems recently due to its
relative simple construction, high power density and ease of control. The DC machine
offer better performance, reliability and higher torque. The speed control is achieved by
using proportional-integral controller. PI controllers are widely used in the industry due
to their simple control structure and ease of implementation. The conventional converter
has high number of power switches and diodes and also it increases the cost. Our aim is
to be design of positive output super lift converter fed DC motor and also regulates the
speed of DC motor using conventional controller.
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
22
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
Network Function (VNF) say Layer 3 router that does both IPv4 and IPv6 routing using Intel
DPDK concepts and libraries in such a way that the same application can be used in both bare
metal as well as Virtual Machine. Vector processing of packets can be used further to
increase the processing rate by many folds.
Keywords: Social Network Mental Disorders, Stress detection, factor graph model,
micro-blog, healthcare, social interaction.
IOT Based Data Aggregation in Cloud for Remote Patient Health Monitoring
Yamini Priya 1, Rizvana.M 2
Department of Information Technology,
P.S.V College of Engineering & Technology, Krishnagiri, Tamilnadu 635108
Abstract
The Internet of things (IoT) has brought the vision of the smarter world into
reality it has a many application domains. The convergence of IOT-cloud can play a
significant role in the smart healthcare by offering better insight of healthcare content to
support affordable and quality patient care. In today’s medical system, IoT uses different
types of sensors that help elderly people to make use of modern medical healthcare
services anywhere, any time. The IoT (Internet of Things) is a technology concept
and/or an architecture which is an aggregation of already available technologies. IoT
architecture can also be called as an event-driven model. The visionaries have also
realized that this IoT ecosystem has business applications in areas of Home Automation,
Factory/assembly line automation, Retail, Medical/Preventive healthcare, Automotive
and more.Starting from the bottom level, the data flow gets generated from any “thing”
through sensors that are being sent out to the cloud through communication gateway for
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
23
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
analysis, which turns out to be useful information. IoT has evolved from the
convergence of wireless technologies, micro electromechanical systems and the Internet.
Keywords: Internet of Things, Data Aggregation.
Clone Cloud Framework And Adaptive Task Scheduling Design For Efficient
Offloading in Vehicular Clouds
Nishanthini M1 , Srinivasan.M2
Department of Information Technology,
P.S.V College of Engineering & Technology, Krishnagiri, Tamilnadu 635108
Abstract
Due to the increase in processing, storage and communication capabilities of
Vehicular Nodes a Mobile Computing platform called as Vehicular Cloud has been
envisioned. It can be exploited to improve the on-road safety and other services using the
under-utilized resources in vehicles. We design a system to adaptively offload specific
vehicular application to the cloud. The eventual goal of VCN is to create a vehicle cloud
and to encourage collaborations. Unlike the Internet cloud that is created and
maintained by a cloud provider. The vehicle cloud is temporarily created by inter-
connecting resources available in the vehicles and Road Side Units (RSUs). VCC and
ICN together contribute to creating the cloud and to running the virtual platform
efficiently.
Keywords: Cloud Computing, Vehicular Node, Mobile Computing.
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
24
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
Finally, the experimental results are compared with the predicted values and have find
that there is any correlation between the results.
Keywords: Synthetic fibers, Natural fibers, Jute, Sisal, Coconut spathe, coir.
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
25
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
Keywords: Spring steel; Surface treatment; Stress relieving; Shot peening; Fatigue
properties
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
26
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
Design of a Tilting Mechanism for a Narrow Tilting Car to Increase the Maximum
Speed in Curves
Chenguttavan , K.Anand 2, M.E., (Ph.d) ,Prof/ MECH
1
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
27
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
to increase the work performance and this would also help to manage the occupational
effectively.
Keywords: Cognition, Stress, Enhancing, Effective, Performance, Relationships
Abstract
Employee motivation is essentially about commitment to doing something. In the
context of a business, motivation can be said to be about “The will to work”. The
employee motivation research attempts to deduct the dynamic linkages between foress
auto comps at hosur.The purpose of this employee motivation study is to examine
motivation of employees. Every organization needs to have well motivation in
employees to perform their work good in the organization when the employees feel good
about their jobs, certain factors to tent to consistency related to job. Theory provides an
explanation a of job satisfaction and the comfortableness of an employee in the
organization. My study is to examine the various factors of motivation in employees
with reference to Maslow’s need hierarchy, to know the level of motivation in employees
of the company and to provide practical suggestion for the improvement of organization
performance. The questionnaire was designed which included question’s regarding
motivation in employees their satisfaction and dissatisfaction. Accordingly, 50
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
28
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
employees selected random from all the departments of the organization and feedback
forms have been obtained. Through this analysis, interpretations were done accordingly.
Keywords Motivation, Performance, Interpretation
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
29
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
30
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
31
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
32
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
part contains the research design and the tools used for analysis. The analysis and
interpretation part contains three statistical tools like ANOVA, simple percentage and
weighted average.
Keywords: Welfare, satisfied, expected, effectiveness, effectiveness, measures
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
33
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
of the findings of the study relate to reducing the stress and increase the
performance of the job. Some of the suggestions of the study relate to the
workplace demand, heavy work load and providing transportation facilities to the
employees. The study has been concluded that the performance of ALLOYSYS
EXTRUSION [PVT] LTD is excellent in comparison with its industrial competitors
and that the company has high growth prospects in future years to come.
Keywords: Suggestion, reducing, performance, demand, heavy, transportation
Abstract
A study on inventory management comprises the most important part of present
resource of biggest greater part of production sector because of the comparative a
largeness of stock managed by most companies, an important sum of organization
finance is being dedicated to them. In thus becomes absolutely crucial to handle stock
effectively so as to prevent the cash of modifying production rates extra time stock out
time during times of optimum requirement for their product the purpose of the research
is to evaluate the present process of inventory control and its enhancement. Appropriate
information was gathered from the additional resource different inventory method EOQ,
ABC, VED, and research were provided and described the researches suggests the
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
34
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
opportunities and enhance inventory control in sector and recommended to use EOQ
method for regarding the components required for production.
Keywords:Important, largeness, modifying, additional, opportunities
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
35
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
A Study on Career Planning and Development towards Gvg Paper Mills Private
Limited with Special Reference To Udumalpet
Samundeeswari.S, Prof. R.Vasu, MBA., M.Phil., AP/MBA Department of
Management P.S.V College of Engineering and Technology, Krishnagiri
Abstract
The elements and terminology related to career planning and development are
discussed. The common theories concerning individual career planning are briefly
outlined and an overview of the career planning process is provided. Career planning
which includes training and education, is seen as an effective tool against the threat of
skill obsolescence, but must be undertaken in a well-defined and systematic way to be
successful. The purpose of this research has been to investigate that how companies are
using training as a means of career development of their employees and to study
employees related to training and development as well as career planning and
development. The theoretical portion of this report has been studied with an aim to gain
knowledge about the various concept related to training and development and career
planning and development. The data analysis of research results showed that companies
are now focusing on the trainings of the employees which are aimed towards their career
growth.
Keywords: Concerning, provided, investigate, portion, growth.
A Study on Organizational Culture Towards Propultion Technologies Pvt.Ltd.
AnnaiesthaR.M, Prof. N.Yogammbal, MBA., M.Phil., AP/MBA
Department of Management
P.S.V College of Engineering and Technology, Krishnagiri
Abstract
This topic tells about organizational culture impact on employee behavior in
propulsion technologies. The main objective is analyze the organizational culture and its
impact on employee behavior (helping ,innovation , achievement) to study the employee
opinion towards attitude physical and social structure of the organization, to understand
the working environment. Factors which influence in organizational structure are nature
of the business, company values, company policies, work ambiance, recruitment and
selection. Convenience sampling is used in this article .sample size is 200. ANNOVA,
chi square test, Karl Pearson, co-efficient are the tools used in this study.
Keywords: Organizational culture, innovation, working environment, physical & social
structure.
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
36
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
My objective of the study deals with the training period of new employee, analysis
quality and stratification of respondents, employee expectation on the training program.
Factor which influence employee training are skills & knowledge, top management
support, technological advances, learning style, life time learning, payroll. Random
sampling method are used this study. Percentage analysis, chi-square test, co-efficient of
correlation, ANNOVA this are the tools used in this study.
Key words: Training & development, skills knowledge, quality & stratification,
top management support, technological advances, life time learning, payroll.
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
37
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
to reduce the rate of absenteeism. Factors which influence employee absenteeism are
workplace, negative work environment, waning job commitment, personal hard ship,
full life. Convenience sampling method was used in this project. Sampling size is 100.
Percentage analysis, chi-square test are the tools used in this study.
Key words: Employee absenteeism, job dissatisfaction, internal and external
reasons, continuous absenteeism, possible ways to reduce absenteeism.
A Study on Job Satisfaction towards Jeppiaar Milk Product Private Limited with
Special Reference To Kariyamangalam
Keerthana.S, Prof. N.Yogammbal, MBA., M.Phil., AP/MBA
Department of Management
P.S.V College of Engineering and Technology, Krishnagiri
Abstract
Job satisfaction also called employees satisfaction. It is management concept,
General attitude towards his job and pleasurable or positive emotional state resulting
from the appraisal of the one’s job or job experience. My objective of this study deals
with identifying working condition, opportunities for promotion and training,
recognition. Independent variable of the study follows on salary & wages, promotion
change, supervision, working condition. Random sampling method used in this study,
the sample size 100. In this article statistical tools used are percentage analysis, chi-
square test, correlation analysis and ANNOVA.
Key word: Job satisfaction, feeling of fulfillment, working condition, salary & wages,
recognition
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
38
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
39
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
Abstract: Shear strength of fiber reinforced concrete beams was studied in this research
project. Three types of fibers were examined: hooked-end steel fiber, crimped-steel fiber,
and crimped-monofilament polypropylene fibers. The experimental program included
five beam specimens. Two of the beams were control specimens in which one was
reinforced with minimum shear reinforcement while the other one did not have any
shear reinforcement. Each one of the other three specimens was reinforced with one of
the above mentioned fibers by 1% volumetric ratio. In addition to the beam specimens,
three prisms were also made for each type fiber to determine their toughness
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
40
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
Abstract: Generally, cement concrete is weak in tensile strength and even the steel
reinforced concrete has limited ductility and little resistance to cracking. The utilization
of concrete is increasing at a higher rate due to development in infrastructure and
construction activities all around the world. Researchers are using agricultural and
industrial waste to improve the strength properties of concrete and to lead sustainable
development. This environmental reason has generated a lot of concern in the
construction world. Natural fibers, as reinforcement, have recently attracted the attention
of researchers because of their advantages over other established materials. They are
environmentally friendly, fully biodegradable, abundantly available, renewable, cheap
and have low density. Plant fibers are light compared to glass and carbon fibers. To
overcome the deficiency of the conventional concrete, fibers have been added to prevent
the concrete from cracking and also the strength will be increased. In this project, a study
is conducted to analyze impact of using sisal fiber to reinforce the cement concrete
components.
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
41
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
42
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
concrete matrix for improving its compressive and tensile or flexural strength. The aim of
this research is to study the performance of graphene cement concrete, and also compare
the compressive and split tensile strengths of M25 concrete by replacing cement with 1%
and 2% graphene oxide. To study compressive strength and split tensile strength the
specimens were tested at 28days, 56days and 90 days of curing. XRD test was conducted
to know the crystalline behavior of the concrete specimens with amount of energy
compared with nominal concrete.
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
43
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
44
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
Tools and Techniques for Extraction of Public Data and Images from Facebook
Dr.S.Nagarajan, Asst.Professor
Department of CSE, Government college of Engineering, Srirangam,Trichy
Mr.N.Muni Sankar, Research Scholar, Department of CSE
Annamalai university, Chidambaram
Abstract:
Social networks play vital role in human communication and to improve the
business applications. The Facebook is one of the most popular social networking
application. However, the Facebook generates huge amount of data in the form of text,
advertisements, posts, images and videos etc. By analyzing Facebook data we can find
the location where our business promising in the real world. While sharing personal data
users demand security. In this paper, we present various data extraction methods for
Facebook. The present works not described about image data extraction from the social
medias, whereas we present a technique to extract the Facebook public images.
Index Terms: Facebook, Big Data, trust management, Social Network
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
45
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
when the number of contending nodes is high, more number of frame collisions occur
which leads to drastic reduction in network performance.However, a major concern in
Ad hoc networks is collisions .Furthermore, the packet transmission procedure of the
DCF protocol is modified to avoid channel capture effect and this is represented with a
Markov chain model. To evaluate the proposed mechanism, we derive an analytical
model to determine the network performance. So, in this paper,ABA-IDCW mechanism
achieved better system performance compared to fixed-CW (BEB, EIED, LILD, and
SETL) and adaptive-IDCW (AMOCW, Idle Sense) mechanisms. The simulation results
confirmed the outstanding performance of the proposed mechanism in that it led to a
lower collision probability, higher throughput, and high fairness.
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
46
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
as specified on schedule with proper utilization of all the resources like man power,
materials, money and machinery. To achieve the above goal is to execute the project
most economically better in terms of money and time. The main objective of this study is
to analyse the delays in construction of flyover bridge and also control the time and cost
of the project.
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
47
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
The second factor is to work out the causes and extent of variability in your field.
Get yield maps, soil physical phenomenon maps and elevation maps. If you'd get maps
with years of satellite pictures showing the vegetation index so as to estimate crop
productivity in every season. These inputs square measure then compiled forming
management zones. The result's a outline of patterns of production that may enhance
higher cognitive process and farm management going forward.
Successful implementation of preciseness agriculture isn't a fast fix factor, but rather,
it's typically associate degree evolving method that may not show immediate results will
want multiple methodologies or tools to handle some issues. Don't hesitate to consult
and explore the various existing preciseness agriculture opportunities and technologies.
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
48
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
49
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
In contemporary world, mobile and mobility are playing the vital role in all the
aspects of human life. Most of the researchers are focusing on how to satisfy the
customer with their needs. It leads to concentrate on handoff process in heterogeneous
network environments with low latency. This paper is depicting the concepts of handoff
and prediction algorithms in artificial intelligence for minimizing the latency. First we
have to calculate the Null dwell time between the networks while transferring the data
and implementation using IPV6. IPv6 reduces the size of routing tables and makes
routing more efficient and hierarchical. IPv6's simplified packet header makes packet
processing more efficient. Compared with IPv4, IPv6 contains no IP-level checksum, so
the checksum does not need to be recalculated at every router hop. We propose the new
novel prediction paradigm using linear regression for prediction of the device heath and
weakness status. Hence we can predict and increase the faster processing handoff in
heterogeneous networks.
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
50
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
Premkumar .R
Annamalai University,
Chidambaram.
Dr.R.Manikandan.,
Government college of engineering,
Dharmapuri.
ABSTRACT
Mobile ad hoc networks (MANETs) are one of the emerging technologies of wireless
com- munication, in which each node in the MANET acts as a router. In an ad hoc network,
any node can communicate with any other node in the network. However, this infrastructure
of mobile nodes makes this system more vulnerable to various types of attacks. A black hole
attack is one such attack in which the packet is dropped maliciously. In this paper, we
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
51
Proceedings of 4th National Conference on Innovative Research in Science, Engineering & Management NCIRSEM’19
On 3rd and 4th May 2019.
propose a security solution known as the honeypot-based dynamic anomaly detection using
cross-layer security (HBDADCS). The proposed technique detects and isolates black hole
attacks from the ad hoc network. In this work, various novel algorithms are used which
involve honeypot methodology. These technologies are proposed in order to detect and
isolate black hole attacks from the network. Simulation-based results prove that the proposed
technique has better packet delivery and end to end to delay with a decreased network load
solely due to control packets compared to the other existing techniques.
P.S.V. College of Engineering and Technology, Krishnagiri, Tamilnadu, India – 635 108.
52
ABOUT THE INSTITUTION
The NCIRSEM’19 focuses on the advances in the technology across the globe in the
direction of intelligent computing techniques. The aim of this conference is to provide an
opportunity for bringing together various experts, research scholars and persons from
various industries and institutions to discuss the recent trends in computational research and
development.