Professional Documents
Culture Documents
*NOTE: “Pass marks in the theory 35% in external exam, No minimum for internal
exam”
PROJECT WORK: 100 Marks
*INTERNAL: 30 Marks
*EXTERNAL: 70 Marks
*NOTE: “Pass marks in the project work 50% in externalexam,No minimum for
internal exam”
1YEAR INDUSTRIAL SAFETY COURSE – SBTET
SAFETY, HEALTH & ENVIRONMENT MANAGEMENT
IS-101SECTION-A (2020-2021)
VERY IMPORTANT TEN MARKS QUESTIONS
****
1 YEAR INDUSTRIAL SAFETY COURSE- SBTET
SAFETY ENGINEERING – I
1. What is mechanical material handling? Write down the precautions for safe
handling the material with the help of a fork lift truck? [pg no: 69]
2. Explain the general requirement for storage of materials?[pg no: 79]
3. Explain safety precautions need to be taken, while working in confined
space?[pg no: 68]
4. Discuss in detail about with safety measures that are to be followed
while working at height with examples? [pg no: 82]
5. What are the different types of scaffolds & List out the scaffold
components? List the common scaffolding hazards? [pg no: 70,76&78]
6. What is power tool? Explain different types of power tools? Write down the
general precautions shall be observed by power tool users? [pg no: 67&87]
7. State the benefits of good illumination. What are the factors to be
considered for adequate lighting?[pg no: 88]
8. Explain lightening stroke effects on health? Explain briefly about importance
of illumination at work place? [pg no: 76]
9. List out the duties and responsibilities of competent person?[pg no: 81]
10. Explain the hierarchy of risk control produced by noise? [pg no: 83]
11. Write briefly about electrical safety? [pg no: 74]
12. Explain the elements of an effective housekeeping program? [pg no: 63]
13. Explain the selection and design of guards? [pg no: 86]
14. What is local exhaust Ventilation system?
15. Explain the static Electricity controlling Techniques? ( Page no:66)
SECTION-B
VERY IMPORTANT THREE MARKS QUESTIONS
1. Explain the chemical hazards in sugar industry and list their control measures?[pg
no: 97]
2. What are the occupational hazards in textile industry? Explain the preventive
measure for them?[pg no: 99]
3. Explain in detail about safety measured that are to be followed at a
construction site?[pg no: 100]
4. List out the points in scaffold safety checklist?[pg no: 93]
5. Explain the safety tips in cargo handling? (or) Explain the safety tips used in
docks?[pg no: 115]
6. What are the safe measures taken in boiler as they operate above atmospheric
pressure? [pg no: 89]
7. Explain the boiler dry storage procedure?[pg no: 98]
8. List hazardous job for which permit required. List safety precautions need for hot
work? [pg no: 139]
9. What are some health and safety hazards associated with being a welder?
[pg no: 101]
10. List out safety tips for brazing / soldering?[pg no: 140]
11. Discuss about cleaner technologies? [pg no: 92]
12. Explain about sources of land pollution? [pg no: 132]
13. Briefly explain the COSHH? ( page no:122)
SECTION-B
VERY IMPORTANT THREE MARKS QUESTIONS
****
1YEAR INDUSTRIAL SAFETY COURSE –
SBTETQUALITY CONTROL OCCUPATIONAL
SAFETY & HEALTH
SECTION-B
IMPORTANT THREE MARKS QUESTIONS
****
1YEAR INDUSTRIAL SAFETY COURSE – SBTET
SAFETY HEALTH & ENVIRONMENT LEGISLATION
IS-105 SECTION-A (2020-2021)
1. List out the chapters in the factory act, 1948? [pg no:240]
2. What is the object and applicability of ESI act, 1948?[pg no:234]
3. List out important sections in Motor vehicle act, 1988?[pg no:233]
4. Define the term manufacturing process according to the factories act,1948?[pg
no:209]
5. What are the duties of certifying surgeon under the factories act,1948
[pg no: 217]
6. What is the main objective of the factories act, 1948?[pg no:227]
7. List out the silent features of gas cylinder rules, 2004?[pg no:230]
8. Distinguish between an act and rule with suitable example?[pg no:237]
9. Briefly state the safety precautions to be taken during loading/ un loading
of gas cylinders?[pg no:239]
10. List out the powers of dock inspectors?[pg no:240]
11. Write short notes on general duties of occupier as per the factories act,
1948?[pg no:233]
12. Write down the rights and responsibilities of workers as laid down under
section 111 and section 111A of the factories act, 1948?
[pg no: 229]
13. Briefly describe the objectives and applicability of the public liability
insurance act, 1991?[pg no:227]
14. List out the some important points in on-site emergency plan?[pg no:221]
15. What is the difference between cylinders and pressure vessels?
[pg no: 211]
16. Define water pollution prevention/ control act 1974 and Air pollution
prevention/ control act 1981?
1YEAR INDUSTRIAL SAFETY COURSE – SBTET
INDUSTRIAL HEALTH AND OCCUPATION
IS-106 SECTION-A (2020-2021)
****
1YEAR INDUSTRIAL SAFETY COURSE – SBTET
SAFETY IN CHEMICAL INDUSTRY
IS-107 SECTION-A (2020--2021)
****
1YEAR INDUSTRIAL SAFETY COURSE – SBTET
SAFETY IN CONSTRUCTION INDUSTRY
IS-108 SECTION-A (2020-2021)
SECTION-B
VERY IMPORTANT THREE MARKS QUESTIONS
1. What are the safety precautions while using stair case?[pg no:392]
2. State the types of soils?[pg no:401]
3. List out air hoses handling steps? [pg no:421]
4. What are the hazards in crane operation?[pg no:419]
5. What is sign board? Explain? [pg no:425]
6. What are some preventive measures for painters? [pg no:420]
7. What are the safety precautions to store dangerously reactive materials?[pg
no:389]
8. What is maintence and explain its types? [pg no:408]
9. List out the welfare measures for construction workers? [pg no:418]
10. What are the excavation hazards? [pg no: 425]
11. Write safety measures while handling glass materials? [pg no:403]
12. List out the hazards by motor powered tricks? [pg no:425]
13. Write about the functions of welfare board? [pg no:387]
14. How to use pneumatic tools safety? [pg no:415]
15. List out precautions for floor openings? [pg no:416]
16. What are the ill effects of fly ash on workers?
17. How does the wood dust effect the wood workers?
***
NOTE: THIS ANSWERS AVAILABLE IN IIFSE -STUDY MATERIAL BOOK
(INDUSTRIAL SAFETY)