Professional Documents
Culture Documents
You can also select the gain in dB of the amplifiers you are using. T
but if you have an amplifier using an alternative gain structure, you
threshold for all products will update to ensure that the system is pr
Note that all parameters are a recommendation, they have been tested to en
products but Martin Audio accepts no liability for damage to systems through
Martin Audio
System Parameters
Thank you for using the Martin Audio System Parameter spreadsheet which co
processor settings to get the best possible performance from all current Martin
The spreadsheet features a menu system to quickly navigate to the page conta
product. Just click on the product you need on the contents page and a hyperlin
page. Each page has a link back to the contents page to make it convenient to
An additonal feature is the Settings page which can be selected either from the
any product page. From here you can select the controller or DSP amplifier you
parameteric EQ and limiter parameters are displayed. You can choose from Ma
DX4.0 controller, Linea Research ACS48 controller and M and C Series amplifi
which includes the amplifier modules used in many third party powered speake
includes Martin Audio DX0.5, DX1, DX1.5 and DX2, and BSS processors.
You can also select the gain in dB of the amplifiers you are using. The default is
but if you have an amplifier using an alternative gain structure, you can enter th
threshold for all products will update to ensure that the system is properly prote
Note that all parameters are a recommendation, they have been tested to ensure that they
products but Martin Audio accepts no liability for damage to systems through use of these
given
orrect
ctly from
how
nd the
plifiers
ers which
dB (x40)
he Limiter
rom our
Martin Audio
System Parameters
Settings
LE Monitors
Subwoofers
TH Series
Blackline X
CDD
O-Line
Adorn
Adorn
Ceiling
DDX
itors
ofers
es
ne X
BV vs Volts RMS
nsitivity vs Gain
Contents
Contents
Select the Loudspeaker processor or amplifier that you are using, either Martin Audio, Linea
Research, XTA, BSS or Q-SYS. Note that there are two options for iKON amplifiers & DX4.0,
either programmed from VU-NET or directly from the product front panel
DX0.4/0.6
Select Processor
iKON (VU-NET)
iKON
DX4.0 (VU-NET)
DX4.0
XTA
BSS
Q-SYS
Amplifier Gain
Choose the gain to match the amplifiers you are using, the limiter threshold
will automatically update. If you have seklected an iKON amplifier this will
automatically be 32dB. Linea Reasearch XiB are automaticaly set to 27dB
32dB
26dB 31dB
27dB 32dB
27dB 32dB
28dB 33dB
29dB 34dB
30dB 35dB
ssor or amplifier that you are using, either Martin Audio, Linea
S. Note that there are two options for iKON amplifiers & DX4.0,
ET or directly from the product front panel
Amplifier Gain
h the amplifiers you are using, the limiter threshold
e. If you have seklected an iKON amplifier this will
Linea Reasearch XiB are automaticaly set to 27dB
X 40
31dB 36dB
32dB 37dB
32dB 37dB
33dB 38dB
34dB 39dB
35dB 40dB
Select Processor Amplifier Gain
Contents 17 DX0.4/0.6
-7.8dBu -7dBu -6dBu -5dBu -4dBu -3dBu -2dBu -1dBu 0dBu 1dBu 2.21dBu 3dBu 4dBu 5.22dBu 6dBu 7dBu 8dBu 9dBu 10dBu
(appx -10dBV) (0dBV)
I/P Sensitivity 0.317Vrms 0.34Vrms 0.39Vrms 0.44Vrms 0.49Vrms 0.55Vrms 0.62Vrms 0.69Vrms 0.775Vrms 0.87Vrms 1Vrms 1.09Vrms 1.23Vrms 1.41Vrms 1.55Vrms 1.73Vrms 1.95Vrms 2.18Vrms 2.45Vrms
dBu/dBv
or
dBm if load
is 600W rms voltage dBV rms voltage
SX215 2 x 15" 0dB In 0ms 25.0Hz 24dB/Oct LR 100Hz 24dB/Oct LR 45.0Hz 2.9 1.5dB 0V 0dB 6.5dBu 42ms 670ms 8dB 0
2x15" Subwoofer 70.0Hz 7.4 -3.0dB ###
###
SX115 1 x 15" 0dB In 0ms 25.0Hz 24dB/Oct LR 100Hz 24dB/Oct LR 45.0Hz 2.9 1.5dB 0V 0dB 6.5dBu 42ms 670ms 8dB 0
1x15" Subwoofer 70.0Hz 7.4 -3.0dB ###
###
SX212 2 x 12" 0dB In 0ms 20.2Hz 24dB/Oct LR 90Hz 24dB/Oct LR 55Hz 1.3 6.0dB 0V 0dB 5.6dBu 42ms 670ms 8dB 0
2x12" Subwoofer ###
###
SX112 1 x 12" 0dB In 0ms 20.2Hz 24dB/Oct LR 90Hz 24dB/Oct LR 55Hz 1.3 6.0dB 0V 0dB 5.6dBu 42ms 670ms 8dB 0
1 x 12" Subwoofer ###
###
SX210 2 x 10" 0dB In 0ms 30Hz 24dB/Oct LR 101Hz 24dB/Oct LR 54.6Hz 1.7 6.0dB 0V 0dB 3.7dBu 42ms 670ms 8dB 0
2 x 10" Subwoofer ###
###
SX110 1 x 10" 0dB In 0ms 30Hz 24dB/Oct LR 101Hz 24dB/Oct LR 54.6Hz 1.7 6.0dB 0V 0dB 3.7dBu 42ms 670ms 8dB 0
1 x 10" Subwoofer ###
###
###
*Note: The peak limiter setting assumes an amplifier with sufficient power to deliver the full peak rating of the speaker. If the amplifier has a
lower rating this figure must be reduced to prevent amplifier clipping ###
Wavefront 8
Select Processor Amplifier Gain
Contents ###
*Note: The peak limiter setting assumes an amplifier with sufficient power to deliver the full peak rating of the speaker. If the amplifier has a
lower rating this figure must be reduced to prevent amplifier clipping ###
Wavefront 8
Select Processor Amplifier Gain
Contents ###
*Note: The peak limiter setting assumes an amplifier with sufficient power to deliver the full peak rating of the speaker. If the amplifier has a
lower rating this figure must be reduced to prevent amplifier clipping ###
Wavefront 8
Select Processor Amplifier Gain
Contents ###
*Note: The peak limiter setting assumes an amplifier with sufficient power to deliver the full peak rating of the speaker. If the amplifier has a
lower rating this figure must be reduced to prevent amplifier clipping ###
Wavefront 8
Select Processor Amplifier Gain
Contents ###
*Note: The peak limiter setting assumes an amplifier with sufficient power to deliver the full peak rating of the speaker. If the amplifier has a
lower rating this figure must be reduced to prevent amplifier clipping ###
Wavefront 8
Select Processor Amplifier Gain
Contents ###