Professional Documents
Culture Documents
Garage Structural Analysis-10
Garage Structural Analysis-10
8. Header Design: The header has the required size to carry the load above the window opening. The header
spans the width of the windows and transfers loads to adjacent studs. The header size is based on the calculated
loads.
9. King and Jack Studs: The king studs run continuously from the bottom plate to the top plate, providing
vertical support for the header. Jack studs are installed on each side of the opening to transfer loads from the
header to the bottom plate.
10. Sill Support: There is adequate support beneath the windows. The sill rests on a solid surface, and the
framing is according to the code ( Utah Residencial Code 2015).
10