The document provides instructions for using a G-scan2 device as a J2534 Passthru tool to reprogram ECUs on Hyundai and Kia vehicles. It notes that the J2534 Passthru function was added in May 2016 software and instructs users to update, install a DLL file to recognize the device, and download programming data files through a subscription to the manufacturers' websites. It also specifies using a Mini B cable to connect the device to a PC and only using it for USA Hyundai and Kia models' ECU reprogramming.
The document provides instructions for using a G-scan2 device as a J2534 Passthru tool to reprogram ECUs on Hyundai and Kia vehicles. It notes that the J2534 Passthru function was added in May 2016 software and instructs users to update, install a DLL file to recognize the device, and download programming data files through a subscription to the manufacturers' websites. It also specifies using a Mini B cable to connect the device to a PC and only using it for USA Hyundai and Kia models' ECU reprogramming.
The document provides instructions for using a G-scan2 device as a J2534 Passthru tool to reprogram ECUs on Hyundai and Kia vehicles. It notes that the J2534 Passthru function was added in May 2016 software and instructs users to update, install a DLL file to recognize the device, and download programming data files through a subscription to the manufacturers' websites. It also specifies using a Mini B cable to connect the device to a PC and only using it for USA Hyundai and Kia models' ECU reprogramming.
For G-scan authorized aftermarket distributors only
J2534 Passthru function has been added to G-scan2
from May 2016 version S/W. Update G-scan2 with the Operating J2534 Passthru May 2016 software version first.
Setting J2534 Passthru function of G-scan2 is validated
as the reprogramming tool for USA spec Hyundai and Kia vehicles only. For operating G-scan2 as a J2534 Passthru device, DLL (Library) file must be installed on the PC which is Visit Hyundai and Kia Motors official service needed to recognize G-scan2 as a USB device. website.
Please download ‘J2534 Passthru PC library’ installation Hyundai: https://www.hyundaitechinfo.com
file from the ‘Support’ menu on our website. Kia: http://www.kiatechinfo.com (http://g-scan.gitauto.com) Membership subscription is required for downloading ECU reprogramming data files.
Unzip the file and install the program on the PC.
Hyundai software subscription service Use Mini B type (5 Pin) Cable for connecting G-scan2 with the PC. This cable is industrially standardized which is available off the shelf at an electronic shop.
Kia software subscription service
Mini B type (5 Pin) Male Cable
Using the function for reprogramming of the ECUs
is validated and recommended for Hyundai and Kia models of USA spec only.
G-scan2 serves as the “passthru” device only in
this mode and the data files required for reprogramming must be downloaded from the car manufacturer’s service website at user’s own risk and responsibility.
Connect G-scan2’s mini USB 5 Pin port (next to the SD