Professional Documents
Culture Documents
Faculty of Engineering
Civil Engineering Department
Surveying Laboratory
Experiment No. 7
1939039
SECTION 2
Group 2
Contouring From Grid (Spot Elevation)
………………………………………………………………………………………………………………………………………………………………
Make the grid which has (1m*1m) dimension on the area shown above, choose any point
around your area and assume it the bench mark which has (600m) elevation.
Read the rod reading for all point from (A1 TO F4) and write it in the table.
BS IS FS hi Elev. Point
1.295 601.295 600 Bm
1.386 599.909 A1
1.371 599.924 A2
1.375 599.92 A3
1.372 599.923 A4
1.178 600.117 B1
1.172 600.123 B2
1.162 600.133 B3
1.153 600.142 B4
1.157 600.138 C1
1.15 600.145 C2
1.142 600.153 C3
1.138 600.157 C4
1.136 600.159 D1
1.137 600.158 D2
1.126 600.169 D3
1.123 600.172 D4
1.217 600.078 E1
1.216 600.079 E2
1.207 600.088 E3
1.208 600.087 E4
1.357 599.938 F1
1.348 599.947 F2
1.365 599.93 F3
1.369 599.926 F4
Sample of calculation:
HI = 600+1.295=601.295
Elevation = HI – FS =601.295 – 1.369= 599.926
Elevation = HI – IS =601.295 – 1.386 = 599.909
CHECK:
∑ 𝐵𝑆 – ∑ FS = Last Elev – First Elev
Elevation
A B C D E F
1 599.909 600.117 600.138 600.159 600.078 599.938
2 599.924 600.123 600.145 600.158 600.079 599.947
3 599.92 600.133 600.153 600.169 600.088 599.93
4 599.923 600.142 600.157 600.172 600.087 599.926