Professional Documents
Culture Documents
Sensor Position
Follow your ECU manufacturers guidelines for tuning wastegate 80% 80%
Valve Flow
servo control. Ensure dead band is set to a reasonable level to
not have the output active when not needed. 60% 60%
40% 40%
20% 20%
0% 0%
0% 50% 100% 150%
-20% Valve lift -20%
CAUTION!
Turbosmart does NOT recommend altering to position of the
actuator once the wastegate has been used.
Locate the slave collar between the electronic actuator and the
body underneath the heatshield, A tab on the heatshield will be
folded down into a groove on this collar. Using a flat blade
9