Professional Documents
Culture Documents
DC ch3
DC ch3
Test
Please use a pencil to complete the test. Print your name on the Name line above. Read the
instructions for each section carefully. When you have completed the test, place your test
face down on your desk and raise your hand.
1. What are periodic signals?
1
The signals which change with time The signals which change with
frequency
The signal that reflection in time The signals that repeat itself over a
fixed frequency
page 1
Test Friday, December 1, 2023
4. .........data are continuous and take continuous values.
1
Analog Digital
Analog or digital None of the choices are correct
Analog Digital
Analog or digital None of the choices are correct
Analog Digital
Either analog or digital None of the choices are correct
Analog Digital
Either analog or digital None of the choices are correct
Amplitude Time
Frequency Phase
Amplitude Time
Frequency Phase
11. A simple sine wave can be represented by one single spike in the .......domain.
1
amplitude time
frequency phase
decreases increases
remains the same None of the choices are correct
page 3
Test Friday, December 1, 2023
13. Phase distortion can also be called as _________
1
14. The attenuation in dB in terms of input power (P1) and output power (P2) is?
1
page 4
Test Friday, December 1, 2023
15. If V1 is the voltage at port 1 and V2 is the voltage at port 2, then the attenuation in dB
1 is?
16. ___________ is defined as the ratio of desired signal power to undesired noise power.
1
17. Which of the following delay is faced by the packet in travelling from one end system
1 to another?
18. For a 10Mbps Ethernet link, if the length of the packet is 32bits, the transmission delay
1 is ____________ (in microseconds)
3.2 32
0.32 320
page 5
Test Friday, December 1, 2023
19. In the transfer of file between server and client, if the transmission rates along the
1 path is 10Mbps, 20Mbps, 30Mbps, 40Mbps. The throughput is usually ___________
20Mbps 10Mbps
40Mbps 50Mbps
20. ________ is a type of transmission impairment in which the signal loses strength due
1 to the resistance of the transmission medium.
A)Attenuation B)distortion
C)Noise D) Decibel
21. ________ is a type of transmission impairment in which the signal loses strength due
1 to the different propagation speeds of each frequency that makes up the signal
A) Attenuation B) Distortion
C) Noise D) Decibel
A) Attenuation B) Distortion
C) Noise D) Decibel
page 6
Test Friday, December 1, 2023
23. When propagation speed is multiplied by propagation time, we get the ________.
1
24. For a ______ channel, the Nyquist bit rate formula defines the theoretical maximum
1 bit rate.
A) noisy B) noiseless
C) bandpass D) low-pass
25. For a ______ channel, we need to use the Shannon capacity to find the maximum bit
1 rate.
A) noisy B) noiseless
C) bandpass D) low-pass
A) Attenuation B) Distortion
C) Noise D) All of the choices are correct
page 7
Test Friday, December 1, 2023
27. The _________ product defines the number of bits that can fill the link.
1
A)bandwidth-periode B)frequency-amplitude
C)bandwidth-delay D)delay-amplitude
29. What is the value of voltage gain in decibels if Voutput = 20V and Vinput = 15V?
1 from:https://www.sanfoundry.com/electronic-devices-circuits-questions-answers-
decibel/
1.75dB 2.28dB
1.37dB 2.48dB
page 8
Test Friday, December 1, 2023
31. Calculate the theoretical channel capacity. If SNR(dB) = 36 and the channel bandwidth
1 is 2 MHz.
a) 12 Mbps b) 24 Mbps
c) 16 Mbps d) 32 Mbps
16.38 14.24
15.85 12.88
page 9
Test Friday, December 1, 2023
33. Calculate the theoretical highest bit rate of a regular telephone line. The signal-to-
1 noise ratio is usually 3162 and bandwidth=3000
34. What is the value of power gain in decibels if Poutput = 250W and Pinput = 100W?
1
a) 2.48dB b) 3.98dB
c) 1.78dB d) 3.54dB
page 10
Test Friday, December 1, 2023
35. Transmission data rate is decided by ____________
1 from:https://www.sanfoundry.com/computer-networks-questions-answers-reference-
models/
36. A channel has a 1-MHz bandwidth. The SNR for this channel is 63. What is the
1 appropriate signel level?
from:https://www.sanfoundry.com/network-security-questions-answers-freshers/
2 8
4 16
page 11
Test Friday, December 1, 2023
37. A channel has a 1-MHz bandwidth. The SNR for this channel is 63. What is the
1 appropriate bit rate?
from:https://www.sanfoundry.com/network-security-questions-answers-freshers/
4 Mbts 6 Mbts
8 Mbts 12 Mbts
38. Calculate the theoretical highest bit rate of a regular telephone line. The signal-to-
1 noise ratio is usually 3162, and the bandwidth is 3000
from:https://www.sanfoundry.com/network-security-questions-answers-freshers/
34.860kbts 17.40kbts
11.62kbts none of the mentioned
page 12