Professional Documents
Culture Documents
DEX-P99RS
Operation Manual
English
Contents
2 En
Contents
En 3
Contents
4 En
Section
En 5
Section
We recommend that you familiarize yourself this information in the event of an insurance
with the functions and their operation by read- claim such as loss or theft.
ing through the manual before you begin 2 Receive updates on the latest products and
using this unit. It is especially important that technologies.
you read and observe WARNINGs and CAU- 3 Download owner’s manuals, order product
TIONs in this manual. catalogues, research new products, and
much more.
6 En
Section
Protecting your unit from 3 Put the front panel into the provided
Important
! Handle gently when removing or attaching
the front panel.
! Avoid subjecting the front panel to excessive
shock.
! Keep the front panel out of direct sunlight and
high temperatures.
Release button
En 7
Section
8 En
Section
En 9
Section
What’s what
a
1 2 3 4
7
4
9 8 7 5 5
6 d b
e c
10 En
Section
Notes
! In the following cases, the sound source will
not change.
— When no unit corresponding to the se-
lected source is connected.
— When there is no disc or magazine in the
player.
— When the iPod is not connected to this
unit with the interface adapter.
— When AUX (auxiliary input) is set to off
(refer to page 36).
— When the BT Audio source is set to off
(refer to Activating the BT Audio source on
page 39).
! When an USB storage device or iPod is not
connected to the USB port of this unit,
NO DEVICE is displayed.
En 11
Section
! If the HD Radio tuner is connected to this # After a CD has been inserted, press SRC/Off
unit, tuner source is skipped. to select the built-in CD player.
! AUX1 is set to on by default. Turn off the AUX1
when not in use (refer to Switching the auxili- Notes
ary setting on page 36).
! The built-in CD player plays one, standard, 12-
! Charging the portable audio player using
cm CD (-R/-RW) at a time. Playing back an 8-
car’s DC power source while connecting it to
cm disc is not possible with this unit.
AUX input may generate noise. In this case,
! The built-in CD player can play back audio CD
stop charging.
and compressed audio recorded on a CD-
! External unit refers to a Pioneer product (such
ROM. (Please see the following section for
as ones available in the future) that, although
files that can be played back. Refer to page
incompatible as a source, enables control of
71.)
basic functions with this unit. Two external
! Read the precautions for the player and discs
units can be controlled with this unit. When
in the following section. Refer to page 70.
two external units are connected, the external
! Do not insert anything other than a CD into
unit is automatically allocated to external unit
the CD loading slot.
1 or external unit 2 by this unit.
! There is sometimes a delay between starting
! When this unit’s blue/white lead is connected
up disc playback and the sound being issued.
to the vehicle’s auto-antenna relay control
When being read, FORMAT READ is dis-
terminal, the vehicle’s antenna extends when
played.
this unit’s source is turned on. To retract the
! If you cannot insert a disc completely or if
antenna, turn the source off.
after you insert a disc the disc does not play,
! Certain devices may need to be switched on
check that the label side of the disc is up.
before being connected to this unit.
Press h/Open to eject the disc, and check
the disc for damage before inserting it again.
Loading a disc ! When the disc loading or ejecting function
does not operate properly, you can eject the
1 Press h/Open to open the front panel. disc by pressing and holding h/Open while
CD loading slot appears. opening the front panel.
2 Insert a CD into the CD loading slot. ! If an error message is displayed, refer to Error
Front panel is closed automatically, and play- messages on page 68.
back will start.
! When loading a CD/CD-R/CD-RW, face Adjusting the volume
the label side of a disc up.
% Use Vol to adjust the sound level.
CD loading slot
# With the remote control, press VOL +/VOL –
to adjust the volume.
12 En
Section
Notes
! To return to the ordinary display, press B.
En 13
Section
14 En
Section
En 15
Section
16 En
Section
Scanning folders and tracks 1 Play the CD that you want to enter a
Scan play searches the song within the se- title for.
lected repeat range. 2 Use MULTI-CONTROL to select
1 Use MULTI-CONTROL to select Pause in 6 Move the cursor to the last position by
the function menu. pushing MULTI-CONTROL right after enter-
Refer to Introduction to advanced operations ing the title.
on the previous page. When you push MULTI-CONTROL right one
more time, the entered title is stored in mem-
2 Press MULTI-CONTROL to turn pause ory.
on.
Playback of the current track pauses. 7 Press B to return to the playback dis-
# To turn pause off, press MULTI-CONTROL play.
again.
Notes
Using disc title functions ! Titles remain in memory, even after the disc is
removed from the unit, and are recalled when
You can input CD titles and display the title.
the disc is reinserted.
The next time you insert a CD for which you
! After data for 48 discs are stored in the mem-
have entered a title, the title of that CD is dis-
ory, data for a new disc overwrites the oldest
played.
one.
! If you connect a multi-CD player, you can
Entering disc titles input disc titles for up to 100 discs.
Use the disc title input feature to store up to ! When a multi-CD player that does not support
48 CD titles in the unit. Each title can be up to disc title functions is connected, you cannot
10 characters long. enter disc titles in this unit.
En 17
Section
Notes
! Read the precautions for USB storage devices
and this unit in the following section. Refer to
! & % Additional Information.
! If an error message is displayed, refer to Error
1 WMA/MP3/AAC/WAV indicator
messages on page 68.
Shows the type of file currently playing.
! If folder 01 (ROOT) contains no files, playback
2 Folder number indicator
commences with folder 02.
3 Track number indicator
! When the USB portable audio player having
4 Voltage indicator
battery charging function is connected to this
Shows the battery voltage.
unit and the ignition switch is set to ACC or
! The level displayed on the voltage indi-
ON, the battery is charged.
cator may differ from the actual voltage
level.
5 Play time indicator Displaying text information of
6 Bit rate/sampling frequency indicator an audio file
! When playing back VBR (variable bit
rate)-recorded WMA files, the average The operation is the same as that of the built-
bit rate value is displayed. in CD player.
! When playing back VBR (variable bit Refer to Displaying text information on disc on
rate)-recorded MP3 files, VBR is dis- page 15.
played instead of bit rate value. ! If the characters recorded on the audio file
are not compatible with the head unit,
% Plugging a USB storage device and those characters are not displayed.
playing ! The text information of some audio files
1 Plug a USB storage device into the USB may not be correctly displayed.
port.
Regarding the position of USB port, refer to
Head unit on page 10.
Selecting files from the file
2 Press SRC/Off to select USB as a source. name list
Playback will start. The operation is the same as that of the built-
in CD player.
% Select a folder Refer to Selecting files from the file name list
Push MULTI-CONTROL up or down. on page 16.
18 En
Section
Notes
! To return to the ordinary display, press B.
! If you select another folder during repeat play,
the repeat play range changes to All repeat.
En 19
Section
20 En
Section
En 21
Section
1 Use MULTI-CONTROL to select Link play 3 When you select iPod, operate the con-
in the function menu. nected iPod to select a song and play.
Refer to Introduction to advanced operations # Switching the control mode to iPod pauses
on the previous page. song playback. Operate the iPod to start play-
back.
# Even if the control mode is set to iPod, follow-
ing functions are available from this unit.
22 En
Section
! Volume
! Fast forward/reverse
! Track up/down
Notes
! When the control mode is set to iPod, opera-
tions are limited as follows:
— Functions other than Control mode (con-
trol mode) and Pause (pause) cannot be
selected.
— Browse function cannot be operated from
this unit.
! Turning this function on pauses song play-
back. Operate the iPod to start playback.
En 23
Section
03 Audio Adjustments
24 En
Section
Audio Adjustments 03
Switching left and right a delay time to match the number and posi-
tion of occupied seats.
channel
1 Use MULTI-CONTROL to select POSI in
You can adjust following functions for left and the audio function menu.
right channel independently or commonly. Refer to Introduction of audio adjustments on
! Adjusting network (NW 1, NW 2, NW 3)
Audio Adjustments
the previous page.
! Fine-adjusting equalizer curve (EQ 2)
2 Push MULTI-CONTROL left, right or up
1 Use MULTI-CONTROL to select the to select a listening position.
audio function described above.
2 Press MULTI-CONTROL and hold to Direction Display Position
switch between left/right independent Left Left Front seat left
mode and left/right common mode.
Each pressing and holding MULTI-CONTROL Right Right Front seat right
selects left/right independent mode and left/ Up Front Front seats
right common mode.
# To cancel the selected listening position, push
3 Press MULTI-CONTROL to select left
MULTI-CONTROL in the same direction again.
channel or right channel when left/right in-
dependent mode has been selected.
Each pressing MULTI-CONTROL selects left
channel and right channel. About the network function
4 Adjust these functions as desired. The network function lets you divide the audio
signal into different frequency bands, and
then reproduce each of them through sepa-
rate speaker units.
Using balance adjustment You can then make precise adjustments to the
You can select a balance setting that provides reproduced frequency band (with a low-pass
an ideal listening environment in all occupied filter or high-pass filter), level, phase and other
seats. parameters to match the characteristics of
each speaker unit.
1 Use MULTI-CONTROL to select BAL in
the audio function menu.
Refer to Introduction of audio adjustments on
the previous page.
2 Push MULTI-CONTROL left or right to
adjust left/right speaker balance.
Each time MULTI-CONTROL is pushed left or
right, the left/right speaker balance moves to-
wards the left or right.
L 25 to R 25 is displayed as the left/right
speaker balance moves from left to right.
En 25
Section
03 Audio Adjustments
26 En
Section
Audio Adjustments 03
! If you set a large absolute value for the 2 Push MULTI-CONTROL left or right to
slope (for a steep slope), continuity of select the speaker unit (filter) to be ad-
sound between speaker units is degraded, justed.
and sounds appear to be separated. Each time MULTI-CONTROL is pushed left or
! If you set the slope to 0 dB/oct. (pass), the right, the speaker unit (filter) is selected in the
Audio Adjustments
audio signal bypasses the filter, so the filter following order:
does not have an effect. SW-HPF (subwoofer HPF)—SW-LPF (subwoo-
fer LPF)—Low-HPF (low-range speaker HPF)
Phase adjustment —Low-LPF (low-range speaker LPF)—
When the cross-over point value for filters on Mid-HPF (middle-range speaker HPF)—
both sides is set to –12 dB/oct., the phase is Mid-LPF (middle-range speaker LPF)—
reversed 180 degrees at the filter cut-off fre- High-HPF (high-range speaker HPF)—
quency. In this case, reversing the phase as- High-LPF (high-range speaker LPF)
sures improved sound continuity.
3 Push and hold MULTI-CONTROL down
1 2 to mute the selected speaker unit (filter).
3 # To cancel the muting, push MULTI-CONTROL
up.
4
6
Adjusting network
5 1 Use MULTI-CONTROL to select NW 1 in
1 Normal phase the audio function menu.
2 Reverse phase Refer to Introduction of audio adjustments on
3 0 dB page 24.
4 –3 dB
5 –12 dB 2 Push MULTI-CONTROL left or right to
6 Crossover point select the speaker unit (filter) to be ad-
justed.
Each time MULTI-CONTROL is pushed left or
Muting the speaker unit (filter) right, the speaker unit (filter) is selected in the
You can mute each speaker unit (filter). When following order:
a speaker unit (filter) is muted, no sound is SW-HPF (subwoofer HPF)—SW-LPF (subwoo-
outputted from that speaker. fer LPF)—Low-HPF (low-range speaker HPF)
! If you mute the selected speaker unit (fil- —Low-LPF (low-range speaker LPF)—
ter), MUTE blinks and no adjustments are Mid-HPF (middle-range speaker HPF)—
possible. Mid-LPF (middle-range speaker LPF)—
! Even if any speaker unit (filter) is muted, High-HPF (high-range speaker HPF)—
you can adjust the parameters for other High-LPF (high-range speaker LPF)
speaker units (filters).
3 Turn MULTI-CONTROL to select NW 2 in
1 Use MULTI-CONTROL to select NW 1 in the audio function menu.
the audio function menu. Refer to Introduction of audio adjustments on
Refer to Introduction of audio adjustments on page 24.
page 24.
En 27
Section
03 Audio Adjustments
28 En
Section
Audio Adjustments 03
Audio Adjustments
Initial (initial)—Custom (custom)—AutoTA High L (high-range left)—High R (high-range
(auto-time alignment)—OFF (off) right)—Mid L (middle-range left)—Mid R
! Initial is the factory supplied time align- (middle-range right)—Low L (low-range left)—
ment. Low R (low-range right)—SW L (subwoofer
! Custom is an adjusted time alignment that left)—SW R (subwoofer right)
you created.
! AutoTA is the time alignment created by 5 Push MULTI-CONTROL up or down to
auto TA and EQ. (Refer to Auto TA and EQ adjust the distance between the selected
(auto-time alignment and auto-equalizing) speaker and the listening position.
on page 31.) Each time MULTI-CONTROL is pushed up or
# You cannot select AutoTA if auto TA and EQ down, the distance increases or decreases.
has not been carried out. In this case, 394.75cm to 0.00cm is displayed as the dis-
Please Set Auto TA appears. tance is increased or decreased, if you have
selected centimeters ((cm)).
155.39inch to 0.00inch is displayed as the dis-
Adjusting the time alignment tance is increased or decreased, if you have
You can adjust the distance between each selected inches ((inch)).
speaker and the selected position. # You can adjust the distance for the other
! An adjusted time alignment is memorized speakers in the same way.
in Custom.
6 Press B to cancel the time alignment
1 Use MULTI-CONTROL to select TA1 in mode.
the audio function menu.
Refer to Introduction of audio adjustments on
page 24. Recalling or copying
2 Press MULTI-CONTROL to select a unit equalizer curves
of distance. The equalizer lets you adjust the equalization
Each press of MULTI-CONTROL selects the to match the car’s interior acoustic character-
unit of distance in the following order: istics as desired.
(cm) (centimeter)—(inch) (inch) It is possible to store the adjusted equalizer
curve in the memory, or recall the stored
3 Use MULTI-CONTROL to select TA2 in equalizer curve from the memory.
the audio function menu.
Refer to Introduction of audio adjustments on
page 24. Recalling the equalizer curve
# Can't Adjust TA. Set POS. FL or FR appears
1 Use MULTI-CONTROL to select EQ 1 in
when neither Left nor Right is selected in the po-
the audio function menu.
sition selector mode (POSI).
Refer to Introduction of audio adjustments on
# When selecting OFF in TA1, you cannot
page 24.
switch to TA2.
En 29
Section
03 Audio Adjustments
2 Push MULTI-CONTROL left or right to # If an equalizer curve has already been stored
select the equalizer curve you want to re- in memory, it will be overwritten by the newly ad-
call. justed equalizer curve.
Each time MULTI-CONTROL is pushed left or
right, equalizer curve is recalled in the follow- 2 Use MULTI-CONTROL to select EQ 2 in
ing order. the audio function menu.
MEMORY1 (memory 1)—MEMORY2 (mem- Refer to Introduction of audio adjustments on
ory 2)—MEMORY3 (memory 3)—MEMORY4 page 24.
(memory 4)—MEMORY5 (memory 5)—FLAT 3 Push MULTI-CONTROL left or right to
(flat) select the equalizer band to adjust.
# When FLAT is selected, no supplement or cor-
Each time MULTI-CONTROL is pushed left or
rection is made to the sound. This is useful to
right, equalizer bands are selected in the fol-
check the effect of the equalizer curves by switch-
lowing order.
ing alternatively between FLAT and a set equali-
20Hz—25Hz—31.5Hz—40Hz—50Hz—63Hz
zer curve.
—80Hz—100Hz—125Hz—160Hz—200Hz—
250Hz—315Hz—400Hz—500Hz—630Hz—
Copying the equalizer curve 800Hz—1k—1.25k—1.6k—2kHz—2.5k—
3.15k—4k—5k—6.3k—8k—10k—12.5kHz—
1 Use MULTI-CONTROL to select EQ 1 in 16k—20k
the audio function menu.
Refer to Introduction of audio adjustments on 4 Push MULTI-CONTROL up or down to
page 24. adjust the level of the equalizer band.
Each time MULTI-CONTROL is pushed up or
2 Push MULTI-CONTROL left or right to down, the level of the equalization band in-
select the equalizer curve you want to creases or decreases.
copy. +12 to –12 is displayed as the level is in-
creased or decreased.
3 Press MULTI-CONTROL and hold to copy
# You can then select another band and adjust
the selected equalizer curve.
the level.
4 Push MULTI-CONTROL left or right to
5 Equalizer curve is automatically stored
select the storage area (MEMORY1 to
in memory.
MEMORY5).
30 En
Section
Audio Adjustments 03
# If auto TA and EQ has not been carried out, Adjusting source levels
Please Set Auto EQ appears. This indicates that
you cannot turn this function on. SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
2 Press MULTI-CONTROL to turn the auto- dical changes in volume when switching be-
equalizer on. tween sources.
Audio Adjustments
# To turn auto-equalizer off, press ! Settings are based on the FM volume level,
MULTI-CONTROL again. which remains unchanged.
En 31
Section
03 Audio Adjustments
32 En
Section
Audio Adjustments 03
— When delays occur for low sounds due 2 Fix the supplied microphone in the cen-
to the influence of the LPF on active ter of the headrest of the driver’s seat, fa-
subwoofers or external amps. cing forward, using the belt (sold
! Auto TA and EQ changes the audio settings separately).
as below:
Audio Adjustments
— The balance settings return to the center
position. (Refer to page 25.)
— The graphic equalizer curve switches to
FLAT. (Refer to page 29.)
! If you carry out auto TA and EQ when a pre-
vious setting of this already exists, the set-
ting will be replaced.
! When connecting tweeters, please confirm
the tweeter’s usable frequency range.
When you set the cut-off frequency, set # The auto TA and EQ may differ depending on
higher than the lowest usable frequency of where you place the microphone. If desired, place
the tweeter. the microphone on the front passenger seat to
! Auto TA uses higher range than 10 kHz for carry out auto TA and EQ.
measurement. Therefore, using the tweeter
that cannot reproduce 10 kHz frequency 3 Turn the ignition switch to ON or ACC.
range may damage the tweeter. When Auto # If the car’s air conditioner or heater is turned
TA&EQ is operated, be sure to set the ap- on, turn it off. Noise from the fan in the air condi-
propriate cut-off frequency. Also, use the tioner or heater may prevent correct auto TA and
tweeter that can reproduce 10 kHz at the EQ.
lowest usable frequency. # Press SRC/Off to turn the source on if this
! Speakers used with this system need to be unit is turned off.
activated in the initial setting menu. Refer
to Setting the speakers on page 35. 4 Press SRC/Off and hold until the unit
! To perform auto-time alignment and auto- turns off.
equalizing, be sure to connect speakers to
5 Press and hold EQ to enter the auto TA
mid range output.
and EQ menu.
The front panel opens automatically.
Carrying out auto TA and EQ
6 Plug the microphone into the micro-
1 Stop the car in a place that is as quiet phone input jack on this unit.
as possible, close all doors, windows and
the sun roof, and then turn the engine off.
# If the engine is left running, engine noise may
prevent correct auto TA and EQ.
En 33
Section
03 Audio Adjustments
34 En
Section
Initial Settings 04
Initial Settings
ple language display. You can select the lan-
guage best suited to your first language.
! 1 Use MULTI-CONTROL to select
1 Function display Language select in the initial setting menu.
Shows the function status. Refer to Adjusting initial settings on this page.
1 Press SRC/Off and hold until the unit 2 Press MULTI-CONTROL to select the lan-
turns off. guage.
Each press of MULTI-CONTROL selects lan-
2 Press MULTI-CONTROL and hold until guages in the following order:
the initial setting menu appears in the dis- English—Français—Español
play.
3 Turn MULTI-CONTROL to select one of
the initial settings.
Setting the speakers
Turn MULTI-CONTROL to switch between the You need to set the speakers used with this
functions in the following order. system.
Language select (language selection)— When this setting is performed correctly, this
SP connection (speaker setting)—Clock unit reproduces high-definition sound suited
(clock)—Warning tone (warning tone)— to your system.
Face auto open (face auto open)—AUX1 ! You cannot change the middle-range
(auxiliary input 1)—AUX2 (auxiliary input 2)— speaker setting. (The middle-range speaker
Dimmer (dimmer)—Brightness (brightness) is always on.)
—Illumination 1 (illumination select)— ! If this setting is adjusted after performing
Illumination 2 (custom illumination)— auto-time alignment and auto-equalizing
ILL line (illumination interlock)—Digital ATT function, perform auto-time alignment and
(digital attenuation)—Audio Reset (audio auto-equalizing again.
reset)—Mute (sound muting/attenuation)—
Door mute 1 (intelligent mute polarity setting) 1 Use MULTI-CONTROL to select
—Door mute 2 (intelligent mute setting)— SP connection in the initial setting menu.
Reverse mode (reverse mode)—Ever-scroll Refer to Adjusting initial settings on this page.
(ever scroll)—BT AUDIO (Bluetooth audio)— 2 Push MULTI-CONTROL left or right to
Pin code input (pin code input)— select the speaker to be adjusted.
BT Version Info. (Bluetooth version informa- Each time MULTI-CONTROL is pushed left or
tion) right, the speaker is selected in the following
Use the following instructions to operate each order:
particular setting. Subwoofer (subwoofer)—Low range (low
# BT AUDIO, Pin code input and range speaker)—High range (high range
BT Version Info. can be selected only when Blue- speaker)
En 35
Section
04 Initial Settings
3 Press MULTI-CONTROL to turn the se- Switching the face auto open
lected speaker on.
# To turn off, press MULTI-CONTROL again. To protect against theft, this unit features de-
tachable front panel. To detach the front panel
easily, the front panel opens automatically.
This function is on as a default.
Setting the clock
Use these instructions to set the clock. 1 Use MULTI-CONTROL to select
Face auto open in the initial setting menu.
1 Use MULTI-CONTROL to select Clock in Refer to Adjusting initial settings on the pre-
the initial setting menu. vious page.
Refer to Adjusting initial settings on the pre-
vious page. 2 Press MULTI-CONTROL to turn the face
auto open on.
2 Push MULTI-CONTROL left or right to # To turn the face auto open off, press
select the segment of the clock display you MULTI-CONTROL again.
wish to set.
Pushing MULTI-CONTROL left or right will se-
lect one segment of the clock display: Switching the auxiliary setting
Hour—Minute
As you select segments of the clock display, Auxiliary devices connected to this unit can be
the selected segment blinks. activated individually. Set each AUX source to
ON when using. For more information about
3 Push MULTI-CONTROL up or down to connecting or using auxiliary devices, refer to
put a clock right. Using the AUX source on page 41.
# You can match the clock to a time signal by
pressing MULTI-CONTROL. 1 Use MULTI-CONTROL to select AUX1/
! If 00 to 29, the minutes are rounded down. AUX2 in the initial setting menu.
(e.g., 10:18 becomes 10:00.) Refer to Adjusting initial settings on the pre-
! If 30 to 59, the minutes are rounded up. vious page.
(e.g., 10:36 becomes 11:00.) 2 Press MULTI-CONTROL to turn AUX1/
AUX2 on.
# To turn AUX off, press MULTI-CONTROL
Switching the warning tone again.
If the front panel is not detached from the
head unit within four seconds of turning off
the ignition, a warning tone sounds. You can Switching the dimmer setting
turn off the warning tone. To prevent the display from being too bright at
1 Use MULTI-CONTROL to select night, the display is automatically dimmed
Warning tone in the initial setting menu. when the car’s headlights are turned on. You
Refer to Adjusting initial settings on the pre- can turn the dimmer on or off.
vious page. 1 Use MULTI-CONTROL to select Dimmer
2 Press MULTI-CONTROL to turn warning in the initial setting menu.
tone on. Refer to Adjusting initial settings on the pre-
# To turn warning tone off, press vious page.
MULTI-CONTROL again.
36 En
Section
Initial Settings 04
Initial Settings
Custom is selected in Illumination 1.
You can adjust the display brightness.
1 Use MULTI-CONTROL to select
1 Use MULTI-CONTROL to select
Illumination 2 in the initial setting menu.
Brightness in the initial setting menu.
Refer to Adjusting initial settings on page 35.
Refer to Adjusting initial settings on page 35.
2 Push MULTI-CONTROL left or right to
2 Push MULTI-CONTROL left or right to
select the color to adjust.
adjust the brightness level.
R (red)—G (green)—B (blue)
0 to 15 is displayed as the level is increased or
decreased. 3 Push MULTI-CONTROL up or down to
# When dimmer is functioning, the brightness adjust the level of color.
level can be adjusted 0 to 10. 4 to 0 is displayed as the level is increased or
decreased.
En 37
Section
04 Initial Settings
38 En
Section
Initial Settings 04
Initial Settings
OFF (off)—20dB ATT (20 dB attenuation)— 1 Use MULTI-CONTROL to select
MUTE (mute) BT AUDIO in the initial setting menu.
Refer to Adjusting initial settings on page 35.
2 Press MULTI-CONTROL to turn the
Switching the reverse mode BT Audio source on.
If you do not perform an operation for about # To turn the BT Audio source off, press
30 seconds, screen indications start to reverse, MULTI-CONTROL again.
and continue reversing every 10 seconds.
1 Use MULTI-CONTROL to select Entering PIN code for
Reverse mode in the initial setting menu.
Refer to Adjusting initial settings on page 35. Bluetooth wireless connection
To connect your cellular phone to this unit via
2 Press MULTI-CONTROL to turn the re- Bluetooth wireless technology, you need to
verse mode on. enter PIN code on your phone to verify the
# To turn the reverse mode off, press connection. The default code is 0000, but you
MULTI-CONTROL again. can change this in this function.
# You can also turn on or off reverse mode by ! With some Bluetooth audio players, you
pressing B while this unit is turned off. For more may be required to enter the Bluetooth
details, refer to Reverse mode on page 8. audio player PIN code in advance to set
this unit for a connection.
! You can only operate this function when
Switching the ever scroll Bluetooth adapter (e.g. CD-BTB200) is con-
When ever scroll is set to on, literal informa- nected to this unit.
tion such as CD title scrolls continuously in
1 Use MULTI-CONTROL to select
the display. Set to off if you prefer the informa-
Pin code input in the initial setting menu.
tion to scroll just once.
Refer to Adjusting initial settings on page 35.
1 Use MULTI-CONTROL to select
2 Push MULTI-CONTROL up or down to
Ever-scroll in the initial setting menu.
select a number.
Refer to Adjusting initial settings on page 35.
3 Push MULTI-CONTROL left or right to
2 Press MULTI-CONTROL to turn the ever
move the cursor to the previous or next po-
scroll on.
sition.
# To turn the Ever Scroll off, press
MULTI-CONTROL again. 4 After inputting PIN code (up to 16 di-
gits), press MULTI-CONTROL.
PIN code can be stored in memory.
En 39
Section
04 Initial Settings
40 En
Section
Other Functions 05
Other Functions
# If the auxiliary setting is not turned on, AUX
About AUX1 and AUX2 cannot be selected. For more details, refer to
Switching the auxiliary setting on page 36.
There are two methods to connect auxiliary de-
vices to this unit.
Setting the AUX title
AUX1 source: The title displayed for the AUX1 or AUX2
source can be changed.
When connecting auxiliary device using a stereo
mini plug cable 1 After you have selected AUX as the
source, use MULTI-CONTROL and select
1 Press and hold h/Open to open the
FUNCTION to display TitleInput "A".
front panel.
AUX1 input jack appears. 2 Enter a title in the same way as the
built-in CD player.
2 Insert the 2.5 mm stereo plug into the
For details concerning operation, refer to En-
AUX1 input jack on this unit.
tering disc titles on page 17.
This auxiliary device is automatically set to
AUX1.
En 41
Section
05 Other Functions
Advanced operations
1 Press MULTI-CONTROL to display the Using the DF (direct
main menu. function) button
You can operate the preprogrammed functions
for each source by using DF on the remote
control.
42 En
Section
Other Functions 05
Other Functions
! DVD – DVD player/multi-DVD player
# To turn pause off, press DF again.
En 43
Section
06 Available accessories
44 En
Section
Available accessories 06
Available accessories
that appears by using MULTI-CONTROL. IUS operation manual.
# % &$
Selecting a channel in the channel
category
1 Switch the channel select settings to
Category.
Refer to Selecting the XM channel select mode
on the previous page. " !
1 SIRIUS band indicator
2 Push MULTI-CONTROL up or down to
2 SIRIUS channel number indicator
select the desired channel category.
3 SIRIUS preset number indicator
3 Push MULTI-CONTROL left or right to 4 SIRIUS channel select setting indicator
select the desired channel in the selected Shows what channel select setting has been
channel category. selected. CH is displayed when
Channel number is selected, and CAT is dis-
played when Category is selected.
Displaying the Radio ID I.R is displayed during the Instant Replay
Channel number select setting mode.
5 Voltage indicator
1 Select the channel select settings to Shows the battery voltage.
Channel number. ! The level displayed on the voltage indi-
Refer to Selecting the XM channel select mode cator may differ from the actual voltage
on the previous page. level.
6 SIRIUS channel name
2 Push MULTI-CONTROL left or right to
Shows the channel name of broadcast
select RADIO ID.
channel.
# If you select another channel, display of the ID
code is canceled. % Select a SIRIUS band.
# Display of the ID code repeats displaying Press B.
RADIO ID and the ID code one after the other. # Band can be selected from SR1, SR2 or SR3.
% Select a channel.
Push MULTI-CONTROL left or right.
En 45
Section
06 Available accessories
# If you push and hold MULTI-CONTROL left or 2 Use MULTI-CONTROL to select the de-
right, you can increase or decrease channel num- sired station.
ber continuously. Turn to change the station; press to select.
# You can also perform tuning from a desired # You can also change the station by pushing
channel category. (Refer to Selecting a channel in MULTI-CONTROL up or down.
the channel category on the next page.) # If you do not operate the list within about 30
seconds, the display is automatically returned to
Note the ordinary display.
It may take a few seconds before you can hear
anything while this unit acquires and processes Introduction of advanced
the satellite signal when you change the source
operations
to SIRIUS tuner or select a channel.
1 Press MULTI-CONTROL to display the
main menu.
Switching the SIRIUS display
2 Use MULTI-CONTROL to select
% Press D/Scrl to switch the SIRIUS dis-
FUNCTION.
play.
The function selection menu is displayed.
Each press of D/Scrl changes the SIRIUS dis-
Turn to change the menu option. Press to
play in the following order:
select.
Play time—Channel number—Channel name
—Category name—Artist name—Song title/ 3 Turn MULTI-CONTROL to select the
program title—Composer name function.
# Play time is displayed during the Instant Re- Channel mode (channel select mode setting)
play mode. Refer to Using Instant Replay function —Game alert (game alert setting)—
on page 48. Team setting (team setting)—Game info
# Play time display indicates the time inverted (game info)—Pause (pause)
from the live broadcast. Play time is displayed in
negative number. Notes
! To return to the ordinary display, press B.
Storing and recalling broadcast ! If you do not operate functions within about
stations 30 seconds, the display is automatically re-
turned to the ordinary display.
You can easily store up to six broadcast sta-
! During the Instant Replay mode, you can se-
tions for later recall.
lect Pause (pause). Refer to Using Instant Re-
! Six stations for each band can be stored in
play function on page 48.
memory.
! Pause is the same as that of the built-in CD
1 Use MULTI-CONTROL to store the se- player. (Refer to Pausing playback on page 17.)
lected station in memory.
Turn to change the preset number. Press and
hold to store.
The SIRIUS preset number you have selected
will flash and then remain lit. The selected sta-
tion has been stored in memory.
46 En
Section
Available accessories 06
Selecting the SIRIUS channel ! You can also operate this function when
select mode SIR-PNR2 is connected to this unit.
You have two methods for selecting a channel:
by number and by category. When selecting Selecting teams for Game Alert
by number, channels in any category can be 1 Display the function selection menu.
selected. Select by category to narrow your Refer to Introduction of advanced operations on
search down to only channels in a particular the previous page.
category.
2 Use MULTI-CONTROL to select
% Press B repeatedly to select the desired Team setting in the function menu.
channel select setting.
Available accessories
Channel number (channel number select set- 3 Push MULTI-CONTROL left or right to
ting)—Category (channel category select select a desired league.
setting) League names are switched in the display.
Using the Game Alert function Switching the Game Alert on or off
This system can alert you when games invol- Once you made team selections, you need to
ving your favorite teams are about to start. To turn the Game Alert function on.
use this function you need in advance to set ! The Game Alert function is on at the default
up a game alert for the teams. setting.
! To use this function, Pioneer SIRIUS bus in-
terface (e.g. CD-SB10) is required. 1 Display the function selection menu.
! To use this function, SIRIUS plug-and-play Refer to Introduction of advanced operations on
unit with Game Alert Function is required. the previous page.
! For details, refer to SIRIUS plug-and-play 2 Use MULTI-CONTROL to select
unit’s manuals. Game alert in the function menu.
En 47
Section
06 Available accessories
48 En
Section
Available accessories 06
% Press DScrl.
Available accessories
Press D/Scrl repeatedly to switch between the
following settings:
Station name—artist name—song title—pro-
gram type
# " ! # When the tuner has been tuned in to an HD
1 / (signal reception status) indicator Radio broadcasting, default display is changed
When digital signal is received, is dis- into station name instead of frequency.
played. Otherwise, is displayed.
2 Channel number Introduction to advanced
3 Band indicator
4 Preset number indicator
operations
5 Signal level indicator 1 Press MULTI-CONTROL to display the
Shows the radio wave strength. main menu.
6 Voltage indicator
Shows the battery voltage. 2 Use MULTI-CONTROL to select
! The level displayed on the voltage indi- FUNCTION.
cator may differ from the actual voltage Turn to change the menu option. Press to se-
level. lect.
7 Frequency indicator The function menu is displayed.
8 Title name
3 Turn MULTI-CONTROL to select the
% Select a band function.
Press B. BSM (best stations memory)—Local (local
# Band can be selected from among FM1, FM2, seek tuning)—Seek mode (seek mode)—
FM3 or AM. Blending (reception mode)
En 49
Section
06 Available accessories
$
Note
To return to the playback display, press B.
50 En
Section
Available accessories 06
Available accessories
Function name Operation
Notes
Refer to Selecting a repeat play
! You can scroll through text data by pressing range on page 16.
and holding D/Scrl. However, the repeat play ranges
! When Ever Scroll is set to ON at the initial set- you can select are different from
that of the built-in CD player. The
ting, text information scrolls continuously in Play mode repeat play ranges of the iPod are:
the display. Refer to Switching the ever scroll ! Repeat One – Repeat the cur-
on page 39. rent song
! Repeat All – Repeat all songs
in the selected list
Browsing for a song
Refer to Playing songs in a random
The operation is the same as that of the iPod Shuffle mode
order (shuffle) on page 22.
connected to USB interface of this unit. (Refer
Refer to Pausing playback on page
to Browsing for a song on page 20.) Pause
17.
However, the selectable categories are slightly
different. Selectable categories are
Playlists (playlists)—Artists (artists)— Notes
Albums (albums)—Songs (songs)—Genres ! To return to the ordinary display, press B.
(genres) ! If you do not operate functions within about
! You cannot search songs by alphabet in 30 seconds, the display automatically returns
the list while using an iPod with interface to the ordinary display.
adapter.
En 51
Section
06 Available accessories
52 En
Section
Available accessories 06
Available accessories
Connection open does not appear in the Stopping playback
function menu. 1 Use MULTI-CONTROL to select Stop in
! If a Bluetooth audio player is connected via the function menu.
A2DP (Advanced Audio Distribution Profile) , Refer to Function and operation on the previous
only Disconnect audio and Device info. ap- page.
pear in the function menu.
! If you do not operate functions other than 2 Press MULTI-CONTROL to stop the play-
Connection open and Disconnect audio back.
within about 30 seconds, the display is auto-
matically returned to the ordinary display.
Disconnecting a Bluetooth
audio player
Connecting a Bluetooth audio 1 Use MULTI-CONTROL to select
player Disconnect audio in the function menu.
1 Use MULTI-CONTROL to select Refer to Function and operation on the previous
Connection open in the function menu. page.
Refer to Function and operation on the previous
2 Press MULTI-CONTROL to disconnect
page.
the Bluetooth audio player.
2 Press MULTI-CONTROL to open the con- Disconnected is displayed. The Bluetooth
nection. audio player is now disconnected from this
Always waiting is displayed. This unit is now unit.
on standby for connection from Bluetooth
audio player.
If your Bluetooth audio player is set ready for
Displaying BD (Bluetooth
Bluetooth wireless connection, connection to Device) address
this unit is automatically established. 1 Use MULTI-CONTROL to select
Device info. in the function menu.
Note Refer to Function and operation on the previous
Before you can use audio players you may need page.
to enter the PIN code into this unit. If your player
2 Push MULTI-CONTROL left to switch to
requires a PIN code to establish a connection,
the BD address.
look for the code on the player or in its accompa-
12-digit hexadecimal string is displayed.
nying documentation. Refer to Entering PIN code
for Bluetooth wireless connection on page 39.
En 53
Section
06 Available accessories
54 En
Section
Available accessories 06
Available accessories
phone for comfort. When adjusted, the volume % Rejecting an incoming call
level is recorded in this unit as the default set- When a call comes in, push MULTI-CONTROL
ting. down.
# Caller’s voice volume and ring volume may
vary depending on the type of cellular phone. Notes
# If the difference between the ring volume and
! If private mode is selected on the cellular
caller’s voice volume is big, overall volume level
phone, hands-free phoning may not be per-
may become unstable.
formed.
# Before disconnecting the cellular phone from
! The estimated call time appears in the display
this unit, make sure to adjust the volume to a
(this may differ slightly from the actual call
proper level. If the volume is muted (zero level) on
time).
your cellular phone, the volume level of your cel-
lular phone remains muted even after the cellular
phone is disconnected. Operating a call waiting
% Answering a call waiting
When a call comes in, press
Making a phone call
MULTI-CONTROL.
Voice recognition # You can also perform this operation by push-
1 Press B and hold until Voice dial ap- ing MULTI-CONTROL up.
pears in the display.
% End all calls
Voice dial appears in the display. When Push MULTI-CONTROL down.
Voice dial ON is displayed, voice recognition
function is now ready. % Switch between callers on hold
# If your cellular phone does not feature voice Press MULTI-CONTROL.
recognition function, No voice dial appears in # You can also perform this operation by push-
the display and operation is not possible. ing MULTI-CONTROL up.
Notes
! Pushing MULTI-CONTROL down ends all
calls including calls waiting on line.
En 55
Section
06 Available accessories
! To end the call, both you and your caller need ! Connection open (connection open)
to hang up the phone. ! Set phone (registering phone)
! Connect phone (connect phone)
56 En
Section
Available accessories 06
Available accessories
Using a cellular phone to initiate a (guest phone 2)
connection # Push MULTI-CONTROL left or right to switch
1 Use MULTI-CONTROL to select the BD address and device name.
Connection open in the function menu. # As you select each assignment, you can see
Refer to Function and operation on the previous whether or not a phone is already registered. If
page. the assignment is empty, No data is displayed. If
the assignment is already taken, the device name
2 Press MULTI-CONTROL to open the con- appears. To replace an assignment with a new
nection. phone, first delete the current assignment. For
Always waiting flashes and the unit is now more detailed instructions, see Deleting a regis-
on standby for connection from a cellular tered phone on this page.
phone.
3 Press MULTI-CONTROL to register the
3 Use cellular phone to connect to this currently connected phone.
unit. When registration is completed,
# PIN code is set to 0000 as the default. You Reg.Completed is displayed.
can change this code. Refer to Entering PIN code # If the registration fails, Reg.ERROR is dis-
for Bluetooth wireless connection on page 39. played. In this case, return to step 1 and try
again.
En 57
Section
06 Available accessories
58 En
Section
Available accessories 06
Calling a number in the phone book 8 To end the call, push MULTI-CONTROL
down.
Important
Be sure to park your vehicle and apply the park-
Editing the name of a Phone Book entry
ing brake when performing this operation.
Important
After finding the number you want to call in
Be sure to park your vehicle and apply the park-
Available accessories
the phone book, you can select the entry and
make the call. ing brake when performing this operation.
1 Turn MULTI-CONTROL to display the You can edit the names of Phone Book entries.
list. Each name can be up to 16 characters long.
2 Press D/Scrl to display the phone book. 1 Display the detailed list of your desired
Press D/Scrl repeatedly to switch between the Phone Book entry.
following lists: Please see Steps 1 to 6 of the following section
Phone book—Missed call—Dialled call—Re- for how to do this. Refer to Calling a number in
ceived call the phone book on this page.
4 Press MULTI-CONTROL to display en- 3 Press D/Scrl to select the desired charac-
tries. ter type.
The display shows the first three Phone Book Each press of D/Scrl switches the character
entries starting with that letter (e.g. “Ben”, types in the following order:
“Brian” and “Burt” when “B” is selected). Alphabet (upper case), numbers and symbols
—alphabet (lower case)—numbers and sym-
5 Push MULTI-CONTROL up or down to bols—European characters, such as those
select a Phone Book entry you want to call. with accents (e.g., á, à, ä, ç) or Russian char-
# You can scroll through text data by pressing acters
and holding D/Scrl. # Pressing and holding D/Scrl enables you to
switch character set between ISO8859-1 (Eur-
6 Push MULTI-CONTROL right to display opean characters) and ISO8859-5 (Russian char-
the detailed list of the selected entry. acters) alternately.
The phone number, name and genre (if as- # European characters and Russian characters
signed) of entries are displayed in the detailed can’t be mixed.
list.
# You can scroll through text data by pressing 4 Push MULTI-CONTROL up or down to
and holding D/Scrl. select a letter.
# If several phone numbers are included in an # To delete a character and leave a space, select
entry, select one by turning MULTI-CONTROL. “_” (underbar).
En 59
Section
06 Available accessories
6 Press MULTI-CONTROL to store the new The 12 most recent calls made (dialled), re-
number. ceived and missed, are stored in the call his-
tory. You can browse the call history and call
numbers from it.
60 En
Section
Available accessories 06
Available accessories
4 When you finish entering the number,
Turning MULTI-CONTROL to change the
press MULTI-CONTROL.
phone numbers stored in the list.
Call confirmation appears.
# If the phone number is already in the phone
# Pushing MULTI-CONTROL right in the confir-
book, the corresponding name is displayed.
mation display returns you to the number input
# You can also change the phone number by
display, and you can reenter the phone number.
pushing MULTI-CONTROL up or down.
5 Press MULTI-CONTROL to make a call.
4 Push MULTI-CONTROL right to display
the detailed list. 6 To end the call, push MULTI-CONTROL
Name and phone number are displayed in the down.
detailed list.
# If the number is already in the Phone Book
then the name is also displayed. Clearing memory
# Turning MULTI-CONTROL switches to the pre- 1 Use MULTI-CONTROL to select
vious or next phone number displayed in the de- Clear memory in the function menu.
tailed list. Refer to Function and operation on page 56.
# If you do not operate functions other than Edit-
ing the name of a Phone Book entry and Editing 2 Push MULTI-CONTROL up or down to
phone numbers within about 30 seconds, the dis- select an item.
play automatically returns to the ordinary display. Each time MULTI-CONTROL is pushed up or
down, the items are switched in the following
5 Press MULTI-CONTROL to make a call. order:
# For an international call, press and hold Phone book (phone book)—Missed calls
MULTI-CONTROL to add + to the phone number. (missed call history)—Dialed calls (dialled
call history)—Received calls (received call his-
6 To end the call, push MULTI-CONTROL
tory)—Dial preset (preset phone numbers)—
down.
All clear (delete all memory)
# If you want to clear all the Phone Book,
Making a call by entering dialled/received/missed call history list and pre-
phone number set phone number, select All clear.
# If guest phone is connected to this unit via
Important Bluetooth wireless technology, Phone book can-
Be sure to park your vehicle and apply the park- not be selected.
ing brake when performing this operation.
En 61
Section
06 Available accessories
62 En
Section
Available accessories 06
Available accessories
! If there are no discs in the multi-CD player ma- Pause and TitleInput "A" operations are basi-
gazine, NO DISC is displayed. cally the same as that of the built-in CD player.
En 63
Section
06 Available accessories
! After track or disc scanning is finished, nor- 3 Select the desired track by pushing
mal playback of the tracks begins again. MULTI-CONTROL left or right.
64 En
Section
Available accessories 06
If ITS play is already on, skip to step 2. If ITS 4 Press B to return to the playback dis-
play is off, use MULTI-CONTROL. play.
Available accessories
on page 63. 100 CD titles (with ITS playlist) into the multi-
CD player. Each title can be up to 10 charac-
3 Select the desired track by pushing ters long.
MULTI-CONTROL left or right. For details concerning operation, refer to En-
tering disc titles on page 17.
4 Push MULTI-CONTROL down to erase
! Titles remain in the memory even after the
the track from your ITS playlist.
disc is removed from the magazine, and
The currently playing selection is erased from
are recalled when the disc is reinserted.
your ITS playlist and playback of the next track
! After data for 100 discs is stored in mem-
begins.
ory, data for a new disc will overwrite the
# If there are no tracks from your playlist in the
oldest one.
current range, ITS empty is displayed and nor-
mal playback resumes.
Displaying disc titles
5 Press B to return to the playback dis-
% Press D/Scrl to select the desired text
play.
information.
! For title entered CD
Erasing a CD from your ITS playlist Play time— : disc title and play time
You can delete all tracks of a CD from your ITS ! For CD TEXT discs
playlist if ITS play is off. Play time— : disc artist name and :
track title— : disc artist name and :
1 Play the CD that you want to delete. disc title— : disc title and : track title
Push MULTI-CONTROL up or down to select — : track artist name and : track title
the CD. — : track title and play time
2 Use MULTI-CONTROL to select # You can scroll through text data by pressing
and holding D/Scrl.
ITS memo in the function menu.
Refer to Introduction to advanced operations
on page 63. Selecting discs from the disc title list
Disc title list lets you see the list of disc titles
3 Push MULTI-CONTROL down to erase
entered in the multi-CD player and select one
all tracks on the currently playing CD from
of them to play back.
your ITS playlist.
All tracks on the currently playing CD are de- % Use MULTI-CONTROL to select the de-
leted from your playlist and Memory deleted sired disc title.
is displayed. Turn to change the disc title. Press to play.
En 65
Section
06 Available accessories
# You can also change the disc title by pushing Shows the chapter (when playing DVD video)
MULTI-CONTROL up or down. or track (when playing Video CD, CD or com-
# When playing CD TEXT disc, push pressed audio) currently playing.
MULTI-CONTROL right to see a list of the tracks 5 Voltage indicator
in the selected disc. Push MULTI-CONTROL left Shows the battery voltage.
to return to the disc list. ! The level displayed on the voltage indi-
# If no title is entered for a disc, NO TITLE is dis- cator may differ from the actual voltage
played. level.
# NO DISC is displayed next to the disc number 6 Play time indicator
when there is no disc in the magazine.
# You can scroll through text data by pressing % Select a chapter/track
and holding D/Scrl. Push MULTI-CONTROL left or right.
# If you do not operate the list within about 30
% Fast forward or reverse
seconds, the display automatically returns to the
Push and hold MULTI-CONTROL left or right.
ordinary display.
# When playing compressed audio, there is no
sound on fast forward or reverse.
66 En
Section
Available accessories 06
Available accessories
ITS memo and TitleInput "A" within about 30
! If you select other discs during repeat play,
seconds, the display is automatically returned to
the repeat play range changes to Disc repeat.
the ordinary display.
! When playing back Video CD or CD, if you per-
form track search or fast forward/reverse dur-
Function and operation ing Track repeat, the repeat play range
Play mode, Random mode, Scan mode, changes to Disc repeat.
Pause and TitleInput "A" operations are basi- ! When playing back compressed audio, if you
cally the same as that of the built-in CD player. select another folder during repeat play, the
Also, ITS play mode and ITS memo opera- repeat play range changes to Disc repeat.
tions are basically the same as that the multi- ! When playing back compressed audio, if you
CD player. perform track search or fast forward/reverse
during Track repeat, the repeat play range
Function name Operation changes to Folder repeat.
Refer to Selecting a repeat play ! Multi-DVD player that has ITS functions and
range on page 16. disc title functions can also be connected to
But the repeat play range that you this unit. In this case, ITS play mode,
can select is vary depending on
the type of disc or system. The re-
ITS memo and disc title input can be con-
peat play ranges of the DVD trolled.
player/multi-DVD player are as ! The ITS function of a DVD player differs
below: slightly from ITS playback with a multi-CD
During PBC playback of Video
player. With multi-DVD player, ITS playback ap-
CDs, this function cannot be oper-
ated. plies only to the CD playing. For details, refer
Play mode
! Disc repeat – Repeat the cur- to Using ITS playlists on page 64.
rent disc
! Folder repeat – Repeat the
current folder
! Title repeat – Repeat just the
current title
! Chapter repeat – Repeat just
the current chapter
! Track repeat – Repeat the cur-
rent track
En 67
Appendix
Additional Information
68 En
Appendix
Additional Information
Additional Information
not connected. microphone se-
Reset the iPod.
curely into the
ERROR-16, 18 Old version of Update the iPod jack.
iPod version.
ERR:High The microphone ! Confirm that the
iPod failure Disconnect the Band, ERR: cannot pick up speakers are con-
cable from iPod. High–Lch, the measuring nected correctly.
Once iPod main ERR:High–Rch, tone of a speaker. ! Correct the input
menu is displayed, ERR:Mid Band, level setting of the
connect the cable ERR:Mid–Lch, power amp con-
again. ERR:Mid–Rch, nected to the
Reset the iPod. ERR:Low speakers.
ERROR-A1 iPod is not Check if the con- Band, ERR: ! Set the micro-
CHECK USB charged but op- nection cable for Low–Lch, ERR: phone correctly.
erates correctly iPod shorted out Low–Rch, ERR:
(e.g., not caught in SUBWOOFER,
metal objects). ERR:SW-Lch,
After checking, ERR:SW-Rch
turn the ignition ERR:Outside The surrounding ! Stop your car in
switch OFF and Noise noise level is too a place that is as
back ON or discon- high. quiet as possible,
nect the iPod and and switch off the
connect again. engine, air condi-
NO SONGS No songs Transfer the songs tioner or heater.
to iPod. ! Set the micro-
phone correctly.
STOP No songs in the Select a list that
current list contains the
songs.
NO DEVICE The USB storage Connect a compa-
device or iPod is tible iPod.
not connected to
the USB port of
this unit.
En 69
Appendix
Additional Information
DualDiscs
! DualDiscs are two-sided discs that have a
recordable CD for audio on one side and a
recordable DVD for video on the other.
! Use only conventional, fully circular discs. ! Since the CD side of DualDiscs is not phy-
Do not use shaped discs. sically compatible with the general CD
standard, it may not be possible to play the
CD side with this unit.
! Frequent loading and ejecting of a Dual-
Disc may result in scratches on the disc.
! Use a 12-cm CD. Do not use an 8-cm disc. Serious scratches can lead to playback pro-
! Do not insert anything other than a CD into blems on this unit. In some cases, a Dual-
the CD loading slot. Disc may become stuck in the disc loading
! Do not use cracked, chipped, warped, or slot and will not eject. To prevent this, we
otherwise damaged discs as they may da- recommend you refrain from using Dual-
mage the player. Disc with this unit.
! Unfinalized CD-R/CD-RW disc playback is ! Please refer to the information from the
not possible. disc manufacturer for more detailed infor-
! Do not touch the recorded surface of the mation about DualDiscs.
discs.
! Store discs in their cases when not in use.
! Avoid leaving discs in excessively hot envir-
onments including under direct sunlight.
Handling guideline of USB
! Do not attach labels, write on or apply che- storage device and this unit
micals to the surface of the discs. ! This unit can play back files in the USB por-
! To clean a CD, wipe the disc with a soft table audio player/USB memory that is
cloth outward from the center. USB Mass Storage Class.
! Condensation may temporarily impair the ! Optimum performance of this unit may not
player’s performance. Leave it to adjust to be obtained depending on the connected
the warmer temperature for about one USB storage device.
hour. Also, wipe any dump discs with a soft ! Do not leave the USB storage device in any
cloth. place with high temperatures.
! Playback of discs may not be possible be- ! Depending on the kind of USB storage de-
cause of disc characteristics, disc format, vice you use, this unit may not recognize
recorded application, playback environ- the storage device or file may not be played
ment, storage conditions, and so on. back properly.
! Operations may vary depending on the
kind of a USB storage device.
70 En
Appendix
Additional Information
Additional Information
the radio. ! There may be a slight delay when starting
playback of audio files encoded with image
data.
Compressed audio ! File extensions must be used properly.
! Only 32 characters from the beginning can
compatibility (disc, USB) be displayed as a file name (including the
WMA extension) or a folder name.
! Compatible format: WMA encoded by ! Russian text to be displayed on this unit
Windows Media Player should be encoded with the following char-
! File extension: .wma acter sets:
! Bit rate: 48 kbps to 320 kbps (CBR), 48 kbps — Unicode (UTF-8, UTF-16)
to 384 kbps (VBR) — Character sets other than Unicode that
! Sampling frequency: 32 kHz to 48 kHz are used in Windows environment and
! Windows Media Audio Professional, Loss- are set to Russian in the multi-language
less, Voice: No setting
! The text information of some audio files
MP3 may not be correctly displayed.
! File extension: .mp3
! Bit rate: 8 kbps to 320 kbps (CBR, VBR)
! Sampling frequency: 16 kHz to 48 kHz (32,
44.1, 48 kHz for emphasis)
Compressed audio files on
! Compatible ID3 tag version: 1.0, 1.1, 2.2, the disc
2.3, 2.4 (ID3 tag Version 2.x is given priority ! ISO 9660 Level 1 and 2 compliant. Romeo
than Version 1.x.) and Joliet file systems are both compatible
! M3u playlist: No with this player.
! MP3i (MP3 interactive), mp3 PRO: No ! Multi-session playback is possible.
! Compressed audio files are not compatible
AAC
with packet write data transfer.
! Compatible format: AAC encoded by iTunes
! Regardless of the length of blank section
! File extension: .m4a
between the songs of original recording,
! Transmission rate: 16 kbps to 320 kbps
compressed audio discs play with a short
(CBR)
pause between songs.
! Sampling frequency: 11.025 kHz to 48 kHz
! Apple Lossless: No
En 71
Appendix
Additional Information
72 En
Appendix
Additional Information
— iPod fifth generation (software version to off on the iPod, Repeat is automatically
1.3.0) changed to All when connecting the iPod
— iPod classic (software version 1.1.2) to this unit.
— iPod touch (software version 2.0)
— iPhone (software version 2.0)
— iPhone 3G (software version 2.0) Copyright and trademark
! Depending on the generation or version of
the iPod, some functions can not be oper- notice
ated. WMA
! Operations may vary depending on the soft-
ware version of iPod.
! When using an iPod, iPod Dock Connector
to USB Cable is required.
Additional Information
! Pioneer CD-IU50 interface cable is also
available. For details, consult your dealer.
! This unit can control previous generations
iPod models with a Pioneer iPod adapter
(e.g. CD-IB100N). Windows Media and the Windows logo are tra-
For details concerning operation with the demarks or registered trademarks of Microsoft
iPod adapter, refer to Playing songs on iPod Corporation in the United States and/or other
on page 50. countries.
This product includes technology owned by
Microsoft Corporation and cannot be used or
About handling the iPod distributed without a license from Microsoft
! Do not leave the iPod in direct sunlight for Licensing, Inc.
extended amounts of time. Extended expo-
MP3
sure to direct sunlight can result in iPod
Supply of this product only conveys a license
malfunction due to the resulting high tem-
for private, non-commercial use and does not
perature.
convey a license nor imply any right to use
! Do not leave the iPod in a high tempera-
this product in any commercial (i.e. revenue-
ture.
generating) real time broadcasting (terrestrial,
! Connect directly the dock connector cable
satellite, cable and/or any other media), broad-
to the iPod so that this unit works properly.
casting/streaming via internet, intranets and/
! Firmly secure the iPod when driving. Do
or other networks or in other electronic con-
not let the iPod fall onto the floor, where it
tent distribution systems, such as pay-audio or
may become jammed under the brake or
audio-on-demand applications. An indepen-
accelerator pedal.
dent license for such use is required. For de-
! For details, refer to the iPod’s manuals.
tails, please visit
http://www.mp3licensing.com.
About iPod settings
iTunes
! You cannot operate the iPod Equalizer on Apple and iTunes are trademarks of Apple
Pioneer products. We recommend that you Inc., registered in the U.S. and other coun-
set the iPod Equalizer to off, before con- tries.
necting to this unit.
! You cannot set Repeat to off on the iPod
when using this unit. Even if you set Repeat
En 73
Appendix
Additional Information
SAT Radio
74 En
Appendix
Additional Information
Additional Information
D 10k/12.5k/16k Hz
Chassis ..................... 178 mm × 50 mm × 164 Slope (LPF) ............. PASS, –6/–12/–18/–24/–30/
mm –36 dB/oct
(7 in.× 2 in.× 6-1/2 in.) Slope (HPF) ............ PASS, –6/–12/–18/–24/–30/
Nose ........................... 170 mm × 45 mm × 18 mm –36 dB/oct
(6-3/4 in.× 1-3/4 in.× 3/4 in.) Gain ............................ 0 dB to –24 dB/Mute (1 dB
Weight .......................................... 1.6 kg (3.5 lbs) step)
Phase ........................ Normal/Reverse
Audio/DSP Low:
Preout max output level ....... 5.0 V HPF/LPF
Loudness contour ................... +10 dB (100 Hz), +6.5 dB Frequency (LPF) ... 25/31.5/40/50/63/80/100/125/
(10 kHz) (volume: –30 dB) 160/200/250/315/400/500/
Equalizer (Left/Right independent 31-Band Graphic 630/800/1k/1.25k/1.6k/2k/
Equalizer): 2.5k/3.15k/4k/5k/6.3k/8k/
Frequency .......................... 20/25/31.5/40/50/63/80/100/ 10k/12.5k/16k/20k Hz
125/160/200/250/315/400/ Frequency (HPF)
500/630/800/1k/1.25k/1.6k/ ................................. 20/25/31.5/40/50/63/80/100/
2k/2.5k/3.15k/4k/5k/6.3k/8k/ 125/160/200/250/315/400/
10k/12.5k/16k/20k Hz 500/630/800/1k/1.25k/1.6k/
Equalization range ........ ±12 dB (0.5 dB step) 2k/2.5k/3.15k/4k/5k/6.3k/8k/
Time alignment ........................ 0 cm to 394.24 cm (0.77 cm/ 10k/12.5k/16k Hz
step), 0 inch to 155.392 inch Slope (LPF) ............. PASS, –6/–12/–18/–24/–30/
(0.3035 inch/step) –36 dB/oct
Network (Left/Right independent): Slope (HPF) ............ PASS, –6/–12/–18/–24/–30/
High: –36 dB/oct
LPF Gain ............................ +6 dB to –24 dB/Mute (1
Frequency ................ 5k/6.3k/8k/10k/12.5k/16k/20k dB step)
Hz Phase ........................ Normal/Reverse
Slope .......................... PASS, –6/–12/–18/–24/–30/
–36 dB/oct
Gain ............................ 0 dB to –24 dB/Mute (1 dB
step)
Phase ........................ Normal/Reverse
HPF
Frequency ................ 800/1k/1.25k/1.6k/2k/2.5k/
3.15k/4k/5k/6.3k/8k/10k/
12.5k/16k Hz
Slope .......................... –6/–12/–18/–24/–30/–36 dB/
oct
En 75
Appendix
Additional Information
SW: FM tuner
HPF/LPF Frequency range ...................... 87.9 MHz to 107.9 MHz
Frequency (LPF) ... 25/31.5/40/50/63/80/100/125/ Usable sensitivity ..................... 9 dBf (0.8 µV/75 W, mono,
160/200/250/315/400/500/ S/N: 30 dB)
630/800/1k/1.25k/1.6k/2k/ Signal-to-noise ratio ............... 72 dB (IHF-A network)
2.5k/3.15k/4k/5k/6.3k/8k/
10k/12.5k/16k/20k Hz AM tuner
Frequency (HPF) Frequency range ...................... 530 kHz to 1 710 kHz (10
................................. 20/25/31.5/40/50/63/80/100/ kHz)
125/160/200/250/315/400/ Usable sensitivity ..................... 25 µV (S/N: 20 dB)
500/630/800/1k/1.25k/1.6k/ Signal-to-noise ratio ............... 62 dB (IHF-A network)
2k/2.5k/3.15k/4k/5k/6.3k/8k/
10k/12.5k/16k Hz
Note
Slope (LPF) ............. PASS, –6/–12/–18/–24/–30/
–36 dB/oct Specifications and the design are subject to mod-
Slope (HPF) ............ PASS, –6/–12/–18/–24/–30/ ifications without notice due to improvements.
–36 dB/oct
Gain ............................ +6 dB to –24 dB/Mute (1
dB step)
Phase ........................ Normal/Reverse
CD player
System .......................................... Compact disc audio system
Usable discs .............................. Compact disc
Signal-to-noise ratio ............... 115 dB (1 kHz) (IHF-A net-
work)
Number of channels .............. 2 (stereo)
MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3
WMA decoding format ......... Ver. 7, 7.1, 8, 9, 10, 11 (2ch
audio)
(Windows Media Player)
AAC decoding format ............ MPEG-4 AAC (iTunes en-
coded only) (.m4a)
(Ver. 7.7 and earlier)
WAV signal format .................. Linear PCM & MS ADPCM
(Non-compressed)
USB
USB standard specification
..................................................... USB 2.0 full speed
Maximum current supply .... 500 mA
Minimum memory capacity
..................................................... 256 MB
USB Class ................................... MSC (Mass Storage Class)
File system .................................. FAT16, FAT32
MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3
WMA decoding format ......... Ver. 7, 7.1, 8, 9, 10, 11 (2ch
audio)
(Windows Media Player)
AAC decoding format ............ MPEG-4 AAC (iTunes en-
coded only) (.m4a)
(Ver. 7.7 and earlier)
WAV signal format .................. Linear PCM & MS ADPCM
(Non-compressed)
76 En
PIONEER CORPORATION
4-1, MEGURO 1-CHOME, MEGURO-KU
TOKYO 153-8654, JAPAN
PIONEER ELECTRONICS (USA) INC.
P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.
TEL: (800) 421-1404
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique
TEL: (0) 3/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936
TEL: 65-6472-7555
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia
TEL: (03) 9586-6300
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada
TEL: 1-877-283-5901
TEL: 905-479-4411
PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.
Blvd.Manuel Avila Camacho 138 10 piso
Col.Lomas de Chapultepec, Mexico, D.F. 11000
TEL: 55-9178-4270
先鋒股份有限公司
總公司: 台北市中山北路二段44號13樓
電話: (02) 2521-3588
先鋒電子(香港)有限公司
香港九龍尖沙嘴海港域世界商業中心 Published by Pioneer Corporation.
9樓901-6室 Copyright ã 2009 by Pioneer Corporation.
電話: (0852) 2848-6488 All rights reserved.
Printed in Japan
<KSNZF> <09D00000> <CRB3070-A> UC