Professional Documents
Culture Documents
2. Hazards identification
GHS classification of the substance/mixture and any national or regional information.
The product is not classified according to the Globally Harmonized System (GHS).
Hazard Classification
• Physical Hazards : Not available
• Health Hazards : Skin corrosion/
corrosion/irritation: - Category-2
• Environmental Hazard : Aquatic Toxicity -
5. Fire-Fighting Measures
• Suitable Extinguishing media: W With foam, carbon dioxide, dry powder or water fog
• Unsuitable extinguishing media: -Not applicable
• Specific Hazard in case of fire / Combustion Products
Products: Thermal decomposition or combustion
c may liberate
carbon oxides and other toxic gases or vapors
• Special protective equipment and precautions for fire fighters. : For fires in enclosed areas, wear self-
self
contained breathing apparatus with full protective clothing.
• Precautions for safe handling: Avoid contact with eyes and prolonged skin contact.
Static electricity can accumulate on dry beads. Leave room for expansion as dry resin swell upon wetting and/or
changing ionic form. Equipment construction material should be compatible with feed, referent, ionic form and
effluent of the ion exchange process. Avoid contact with eyes. Avoid generating and breathing dust. Wash
thoroughly after handling. Keep container closed. Good housekeeping and controlling of dusts are necessary for
safe handling of product.
• Condition for safe storage:
Store at temperatures above 0 °C
Store at temperatures below 40 °C
Effective Date: October 2023 Revision No: 02
Product
Pro Name: Indion FF IP
Keep in original container
Keep container tightly closed to prevent the loss of water
Store away from incompatible materials
8. Exposure controls/personal protection
• Information on the system design: In case of regular work, provide local exhaust ventilation.
• Occupational Exposure limits: No exposure limits noted for mixture. Consult local authorities
auth for recommended
exposure limits.
OSHA Permissible Exposure Limits (PELs) – No exposure limit value known.
ACGIH Threshold Limit Values (TLVs) - No exposure limit value known.
• Biological Limit : N/A
• Appropriate engineering controls: Use in well ventilated area with local exhaust.
• Personal protective equipment :
Respiratory Protection: If engineering controls do not maintain air borne concentrations below recommended
exposure limits (where applicable) or to an acceptable level (in countries where exposure limits have not been
established), an approved respirator must be worn.
Eye Protection: Wear safety glasses with side shields (or goggles).
Hand Protection: Chemical resistant gloves.
Skin Protection: Use skin protection. It is a good industrial hygiene practice to minimize skin contact.
contact
Hygiene measures: Always observe good personal hygiene measures, such as washing after aft handling the
material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to
remove contaminants. Provide eyewash station and safety shower.
9. Physical and chemical properties
• Appearance: Moist spherical beads
• Odour: Odourless
• Odour Threshold: Not available
• Physical State: Solid (bead)
• pH: neutral aqueous slurry
• Melting Point: Not available
• Freezing Point: Not available
• Boiling Point: Not available
• Flash Point: Not available
• Evaporation Rate: Not available
• Flammability (solid, gas): Not available
• Flammability Limit – LEL (%): Not available
UEL (%): Not available
• Vapor Pressure: Not available
• Vapor Density (Air=1): Not available
• Relative Density : Not available
• Specific Gravity: 1.08 Approx.
• Solubility in Water: Insoluble
• Solubility (Other): Not available
• Partition Coefficient (n-Octanol/water):
Octanol/water): Not available
• Auto Ignition Temperature: Not available
• Decomposition Temperature: Not available
• Viscosity: Not available.
• HMIS-Ratings (Scale 0 - 4)
Health = 1
Flammability = 1
Physical Hazard = 0
Personal Protection = --
• Risk phrases :
R 36: Irritating to eyes.
S 26: In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S 39: Wear eye/face protection
Disclaimer:
The information provided in this material safety data sheet is based on current knowledge about the product and current legal
requirements and standards. It relates specifically to health, safety and environmental requirements and standards, may not
identify all hazards associated with the product or its uses or misuses, does not signify any warranty with regard to the
properties of the product, and only applies when the product is used for the purpose
purposess indicated in section 1. This product is not
sold as suitable for other purposes and such other usage may cause risks not mentioned in this safety data sheet.