Professional Documents
Culture Documents
3. Define the following terms related to frequency response (i) Resonant frequency (ii)
resonant peak (iii) bandwidth (iv) cut off frequency
4. What are frequency-domain specifications and explain them
5. Derive expression for resonant frequency and resonant peak
6. Derive expression for Bandwidth and cutoff frequency
7. Derive the relation between phase margin and damping ratio.
8. Explain about correlation between time & frequency response
9.
Bode plot
10. Explain the design rules of Bode Plot.
11. a) Discuss the advantages and limitation of Bode plot method of analysis of control Systems
b) What do you understand by decibel?
c) Explain minimum phase system and non-minimum phase system with suitable example
12. Explain step wise procedure to draw bode plots for T/F containing all types of factors
13.
14. Sketch the Bode plot and determine the Gain margin and phase margin for the
transfer function is given, G(s) == 10/s(1+0.4s) (1+0.1s)
15. Construct the Bode plots for system having open loop transfer function as
5
G(s) H(s) = and Determine a) gain margin b) phase margin
S (1 + 0.5S )(1 + 0.1S )
Polar plot
16. Explain about Polar Plot- how it is used for stability analysis
17. Discuss the calculation of gain crossover frequency and phase crossover frequency
with respective to the polar plots.
18.
1
a) Sketch polar plot for following function G(S) =
S
1
b) Sketch polar plot for function G (jw) =
1 + ST
19. a) Sketch polar plot for function G (S) = S
b) Sketch polar plot for function G (S) = 1+ST
20.
1
(a) Sketch polar plot for unity feedback system with OLTF G(S) =
s ( s + 2)
1
b)Sketch polar plot for unity feedback system with OLTF G(S) =
( s + 4) ( s + 2)
Nyquist plot
21. State and Explain the Nyquist stability criterion
22. Write short notes on (i) Nyquist contour (ii) Encirclements
23.
24.