You are on page 1of 3

Project Title: Solar-Powered Water Filtration Facility for In-Campus Use

Executive Summary:

The proposed project aims to construct an In-Campus Solar-Powered Water Filtration System
Facility at Northwest Samar State University (NwSSU) Main Campus. This system will provide the
university community with free access to clean and safe drinking water, reduce plastic waste, promote
environmental sustainability, and harness renewable energy sources. Through this initiative, NwSSU
seeks to enhance the well-being of its students, faculty, and staff while demonstrating a commitment to
sustainable development and responsible resource management.

Introduction:

Access to clean and safe drinking water is essential for the health and well-being of individuals,
especially in academic institutions. This system will utilize renewable energy sources to provide students,
faculty, and staff with free access to purified drinking water directly within the university premises.

Objectives:

1. To provide a sustainable and reliable source of clean drinking water for the NwSSU community
especially the students.
2. To reduce plastic waste generated from bottled water consumption on campus.

Project Details:

 Solar Panels: Photovoltaic panels will be installed to generate electricity for the water filtration
system.
 Water Filtration Units: Advanced filtration technology will remove impurities and
contaminants from local water sources.
 Storage Tanks: Clean water will be stored in tanks equipped with UV sterilization to maintain its
purity.
 Dispensing Stations: Multiple dispensing stations will be strategically located across the campus
for convenient access.

Water Filtration Process:

Raw Activated
Carbon
Security UV Clean
Water Filter Filter Sterilizer
Water

Quartz High Reverse


Water
Sand Pressure Osmosis
Pump
Filter Pump Filtration
Implementation Plan:

1. Site Assessment: Identify suitable locations for equipment installation and conduct feasibility
studies.
2. Procurement: Source and procure necessary equipment, materials, and services.
3. Installation: Engage qualified contractors to install solar panels, filtration units, storage tanks,
and dispensing stations.
4. Testing and Commissioning: Ensure the functionality and performance of the system meet
quality standards and safety requirements.
5. Monitoring and Maintenance: Establish monitoring mechanisms to track system performance,
water quality, and user feedback. Implement a maintenance schedule to ensure optimal operation
and address any issues promptly.

Budgetary Requirement:

PARTICULARS COST
Solar Power Generation & Controlling
1. Solar Panels
2. Inverter
Php 1,000,000.00
3. Battery
4. Brackets
5. Wiring & accessories
Water Purification System
1. Water Pump
2. High Pressure Pump
3. Quartz Sand Filter & Carbon Activated Filter Php 650,000.00
4. Security Filter
5. Reverse Osmosis System Filter
6. UV Sterilizer
Storage
1. Waste Water Tank
Php 300,000.00
2. Drinkable Water Tank
3. Drinking Fountains
TOTAL COST: Php 1,950,000.00

Monitoring and Evaluation:

Monitoring and evaluation mechanisms will be established to assess the effectiveness and impact
of the water filtration system. Key performance indicators will include:
1. Water quality
2. System reliability
3. User satisfaction.

Risk Mitigation:

1. Water Quality Concerns


a. Risk: There is a risk of water contamination or inadequate purification, compromising the
quality of the drinking water supplied by the filtration system.
b. Mitigation: Implement rigorous water quality testing protocols to ensure compliance with
safety standards and regulations. Regularly monitor and analyze water samples for
contaminants. Install backup purification measures, such as UV sterilization, to enhance
water quality assurance.
2. Community Acceptance
a. Risk: Resistance or skepticism from members of the university community regarding the
adoption of the new water filtration system may hinder its acceptance and utilization.
b. Mitigation: Conduct extensive stakeholder engagement and communication efforts to
educate the community about the benefits of the system, including improved access to
clean drinking water, reduced plastic waste, and environmental sustainability. Solicit
feedback and address concerns through transparent communication channels. Involve
student groups, faculty, and staff in decision-making processes to foster ownership and
support for the project.

3. Environmental Factors
a. Risk: Environmental factors, such as extreme weather events or natural disasters, could
damage or disrupt the operation of the solar panels or water filtration infrastructure.
b. Mitigation: Conduct thorough risk assessments to identify potential environmental
hazards and vulnerabilities. Design infrastructure with resilience and durability in mind,
using high-quality materials and engineering standards.

You might also like