agent that is user-friendly, economical alternative to aluminum or metal formworks. It produces a uniform stain-free finish that is ready to use. A good concrete finish can be achieved by the combination of the oil forming a physical barrier between the formwork surface and the release process.
Appearance Dark Brownish
DESCRIPTION Packing 200L/drum or 1000L/drum Mould Oil is a type of mould release agent that is commonly used for timber, metal, and aluminum Coverage Typically coverage of 15-18 m2 / formwork to create a smooth concrete surface with a liters/coat is possible depending better release quality. on the porosity, : texture, and Nowa Mould Oil is suitable for delivering roughness of surface. high-performance concrete with stain-free finish. Specific 0.87 - 0.097 gravity USES Storage Should be stored in dry conditions and protected from frost. For formwork casting such as aluminum formwork and metal formwork. Shelf Life Stored in the original unopened containers, the shelf life can be stored for 12 month. BENEFITS • Removes shuttering or mould easily. • Cost effective • Does not cause staining on concrete • Ready to use
APPLICATION INSTRUCTION Surface Preparation : Surface must be cleaned from dirt and grease before the application.
METHOD OF APPLICATION
Nowa Mould Oil can be applied by brush, roller or
sprayer. If you are using mould oil sprayer, ensure that the fine nozzle is used. If the mould oil has over applied, allow the excess material to drain away and remove it using a sponge or cloth from the bottom of the mould.
No. 28, Jalan Tiram 14,
Taman Perindustrian Tiram, Jalan Sungai Tiram, 81800 Ulu Tiram, Johor, Malaysia.