Professional Documents
Culture Documents
Karta Katalogowa en K-07-S-15N
Karta Katalogowa en K-07-S-15N
CHARAKTERYSTYKA
CHARACTERISTIC
Keno sp.z o.o. is pleased to present you a non-invasive solution for flat roofs with the use of a ballast
structure, with the possibility of changing the angle of inclination of the modules. The structure is
dedicated to cases where there is no possibility of interfering with the roof sheathing.
MOUNTING OF MODULES
ON THE SHORT SIDE
POSSIBILITY OF CHANGING
THE ANGLE OF THE MODULES
POSSIBILITY
OF MOUNTING EAST-WEST
SEE
CATALOG
W W W. K E N O - E N E R G Y.C O M
BALLAST CONSTRUCTION ON A FLAT ROOF
Keno sp.z o.o. provides a 10-year warranty on the above structure. The assembly of the
structure is carried out by loading the structure with ballast, which is placed on the angles
under the modules. The technical department of Keno sp.z o.o., at the request of the client,
can calculate the required minimum ballast. For this purpose, specific information on the
investment is needed (see table 2). The ballast structure can be used on roofs where the
angle of inclination does not exceed 5 ̊.
Keno sp.z o.o. ballast structures they allow modules to be installed only on the shorter side.
TECHNICAL DRAWING