Professional Documents
Culture Documents
WP
Engine Controller
Datasheet
Product description
The InteliDrive WP is a cost effective and small form Selectable protections alarm/shutdown
factor engine controller with higher IP grade, which 3 level of password protection
features outstanding control, monitoring and protection
USB port for programming
for both mechanical and electronic diesel/gas engines –
all in one unit. The controller is suitable for pumps, 2 languages (user changeable)
compressors, and other simple engine control Real time clock and event history log
requirements. Control functions: PID loop, Comparators, Timers
| InteliDrive WP Datasheet | Related HW ver: 1.0 | Related SW ver: 1.0.0 | Date of issue: 11.9.2018
Technical data
Power supply Analog inputs - voltage
Power supply range 8 - 36 V DC
Number 3 non-isolated
Power supply drop-out
50 ms (from min. 12 V)
immunity
Electrical range 0 - 10 V
Power consumption 118 mA @ 8 V; 38 mA @ 36 V
Resolution 10 bits, 4 digits
Backup battery type CR 1225 - Encapsulated Input impedance > 100 kΩ
Estimated backup ±1 % ±100 mV out of measured
10 years Precision
battery lifetime value
User-defined: 30 points non-
Operating conditions
Supported sensor types linear sensors can be defined
Operating temperature -20 .. +70 °C by the user
95% non-condensing
Operating humidity Analog inputs - Current
(IEC/EN 60068-2-30)
Protection degree
IP65
(front/back panel) Number 3 non-isolated
InteliDrive WP Datasheet 2
Dimensions and mounting
Note: The controller is to be mounted onto the switchboard door. The requested cut-out size is 91x91 mm. Use
the nylon screws and nuts delivered with the controller to fix the controller into the door.
EN 60068-2-2
EN 60068-2-6
EN 60068-2-27
EN 60068-2-30
EN 61000-6-4
EN 61000-6-2
EN 60529 (IP65)
Manufacturer:
ComAp a.s.
Czech Republic E-mail: info@comap-control.com
Phone: +420 246 012 111 Web: www.comap-control.com
© ComAp. Features and specification are subject to change without prior notice.