Professional Documents
Culture Documents
tripod
2 2OverPar
VIEW IN BROWSER
Summary
This was made for holding an iPad with a thick cover on a tripod, vertically
in landscape orientation.
f k h d
6.63 hrs 2 pcs 0.30 mm 0.40 mm PET 120 g Prusa
MK3/S/S+
There are two models. The first one, ipad holder, uses exposed rubber
bands to provide the gripping force. The second one (ipad holder ib) hides
the rubber bands inside the printed parts. Both use 1⁄4-20 threaded inserts
to attach to a tripod. I pushed the inserts in with a hot soldering iron.
Model files
ipad-holder-v4.3mf
ipad-holder-ib-v1.3mf
ipad-holder-v4.f3d
ipad-holder-ib-v2.f3d
Print files
ipad-holder-v4_03mm_petg_mk3s_2h53m.gcode
h PET k 0.40 mm f 0.30 mm 2.88 hrs 53 g d Prusa MK3/S/S+
ipad-holder-ib-v1_03mm_petg_mk3s_3h45m.gcode
h PET k 0.40 mm f 0.30 mm 3.75 hrs 67 g d Prusa MK3/S/S+
License
Attribution-NonCommercial