Professional Documents
Culture Documents
WARRANTY
INDOOR
8 YEARS
WARRANTY
OUTDOOR
ade Polyeth
Gr
yle
Food
ne
E
A
LG
-A
N
O
N
INTRODUCTION
POLYSTOR are premium quality polyethylene tanks produced with the latest rotational moulding technology
to meet a wide range of water and chemical storage requirements and applications. Available in various
sizes and capacities to meet the requirements for various applications, multiple tank systems can be
configured and installed to meet any storage capacity requirements. WEIDA provides comprehensive
technical services to customers in the planning, design and construction of tank systems.
PRODUCT FEATURES
EXCELLENT UV
MODULAR INSTALLATION LIGHTWEIGHT FOR EASY RESISTANCE
EXTENSIVE RANGE Tanks been installed more
SYSTEM HANDLING
Available from 230 litres Multiple tanks system can than 20 years throughout
(50gals) to 45,000 litres Lightweight and rugged Malaysia are still functioning
be installed to cater to properties facilitate easy and
(10,000gals) large storage capacity well.
fast handling, transportation
requirements and installation
E
T UR
1 2
FE A
IUM
3
4
M
5
PRE
Easy Inspection
for Water Clarity
Quality
CYLINDRICAL TANK
CAPACITY DIMENSIONS
MODEL DIAMETER HEIGHT
GALLONS LITRES
MM INCHES MM INCHES
R10CC 200 1,000 1,220 48 1,360 54
SMALL
CAPACITY DIMENSIONS
Bottom Diameter Diameter
MODEL EFFECTIVE MAXIMUM TOP BOTTOM HEIGHT
GALLONS (LITRES) MM INCHES MM INCHES MM INCHES Center Manhole
S-N100/150 100 (455) 150 (682) 1,295 51 1,025 41 690 27
S-N150/200 150 (682) 200 (909) 1,430 57 1,130 45 710 28 Side Manhole
S-N200/250 200 (909) 250 (1136) 1,495 59 1,215 48 825 33
Detachable Dome Cover
S-N250/300 250 (1136) 300 (1362) 1,515 60 1,160 46 1,070 42
INSTALLATION INSTRUCTIONS
SUPPORT BASE
The base of the tank should be fully supported over its whole area by a durable, rigid, flat and level
platform sufficiently strong to withstand, without deflection, the weight of the tank when filled with water.
Support
Support must
must be be
flat
flatlevel, rigid,
level, rigid,
strong
strongand stable
and stable
CONNECTIONS
Pipes connected to the tank should be supported and aligned so as not to distort the tank and back nuts
should not be overtightened.
Flexible Joint Pipe Connection Pipe Connection
Between Tanks Between Tanks
Use sharp cutting tools to produce circular Support valves and fittings
holes with smooth edges free from notches
Perlis
Kedah Sabah
Kelantan
Penang
Terengganu
Perak
Pahang
Selangor
Negeri Sarawak
Sembilan
Melaka Johor