Professional Documents
Culture Documents
If you want to drill in stainless steels and titanium alloys, you will have to
contend with high tool wear. Our new solid carbide drill RT 100 InoxPro has
overcome this challenge, delivering an exceptional performance thanks to its
combination of carbide, geometry and coating specifically tailored to this
material group.
ULTRA-SMOOTH
PERROX COATING
increases wear resistance
LENGTHS
3xD
5xD
7xD
PREMIUM SURFACES
IN THE FLUTE
improve chip removal and
prevent built-up edges
OPTIMISED CARBIDE
with improved combination of
hardness and toughness prevents
chipping at the cutting edge
Ratio drills
Shank form HA
Material Suitability
S Ni / Ti alloys ●
H Hardened steel
t max = l2-(1.5 x d1)
● = Optimal ○= Limited t max
d2
d1
l3 l2
l1
4
Ratio drills
5
Ratio drills
6
Ratio drills
7
Ratio drills
Shank form HA
Material Suitability
S Ni / Ti alloys ●
H Hardened steel
t max = l2-(1.5 x d1)
● = Optimal ○= Limited t max
d2
d1
l3 l2
l1
8
Ratio drills
9
Ratio drills
10
Ratio drills
11
Ratio drills
Shank form HA
Material Suitability
S Ni / Ti alloys ●
H Hardened steel
t max = l2-(1.5 x d1)
● = Optimal ○= Limited t max
d2
d1
l3 l2
l1
12
Ratio drills
13
Ratio drills
14
Ratio drills
15
RT 100 InoxPro, 3xD and 5xD - Series 8512 & 8513
Free-cutting steels < 25 < 255 460 0.006 0.007 0.010 0.013 0.015 0.017 0.019 0.022 0.026
< 32 < 301 410 0.006 0.007 0.009 0.011 0.014 0.016 0.018 0.019 0.023
Unalloyed heat-treatable steels < 20 < 220 395 0.005 0.006 0.009 0.011 0.013 0.015 0.017 0.018 0.022
< 25 < 255 395 0.005 0.006 0.009 0.011 0.013 0.015 0.017 0.018 0.022
< 32 < 301 345 0.005 0.006 0.008 0.010 0.011 0.013 0.015 0.016 0.019
Alloyed heat-treatable steels < 32 < 301 375 0.005 0.006 0.008 0.010 0.012 0.014 0.016 0.017 0.020
< 43 < 402 330 0.004 0.005 0.007 0.009 0.010 0.012 0.013 0.015 0.017
Unalloyed case hardened steels < 25 < 255 410 0.006 0.007 0.009 0.011 0.014 0.016 0.018 0.019 0.023
Alloyed case hardened steels < 32 < 301 375 0.005 0.006 0.008 0.010 0.012 0.014 0.016 0.017 0.020
< 43 < 402 375 0.005 0.006 0.008 0.010 0.012 0.014 0.016 0.017 0.020
Nitriding steels < 32 < 301 330 0.004 0.005 0.007 0.009 0.010 0.012 0.013 0.015 0.017
< 43 < 402 280 0.004 0.005 0.006 0.008 0.009 0.010 0.012 0.013 0.015
Tool steels < 25 < 255 375 0.005 0.006 0.008 0.010 0.012 0.014 0.016 0.017 0.020
< 43 < 402 280 0.004 0.005 0.006 0.008 0.009 0.010 0.012 0.013 0.015
High speed steels < 43 < 402 245 0.004 0.005 0.006 0.008 0.009 0.011 0.012 0.014 0.016
Spring steels < 38 < 354 215 0.003 0.004 0.006 0.007 0.008 0.009 0.010 0.011 0.014
< 48 < 460
Hardened steels
< 66 -
< 28 < 273
Stainless steels, sulphured 230 0.003 0.003 0.004 0.006 0.006 0.007 0.008 0.009 0.011
austenitic < 36 < 337 280 0.003 0.004 0.005 0.006 0.007 0.009 0.010 0.011 0.013
martensitic < 46 < 435 295 0.003 0.004 0.006 0.007 0.008 0.009 0.010 0.011 0.014
< 23 < 242
Cast iron
< 38 < 354
< 23 < 242
Spheroidal graphite iron and
< 38 < 354
malleable cast iron
< 38 < 354
Chilled cast iron
< 20 < 220
New cast materials GGV
< 32 < 301
< 32 < 301
New cast materials ADI
< 43 < 402
Special alloys < 54 < 549 165 0.002 0.003 0.004 0.005 0.006 0.007 0.008 0.009 0.010
< 25 < 255
Ti and Ti-alloys 195 0.002 0.003 0.004 0.005 0.006 0.007 0.008 0.009 0.010
< 43 < 402 150 0.002 0.002 0.003 0.004 0.005 0.006 0.006 0.007 0.008
Duroplastics
Thermoplastics
Reinforced plastics - Kevlar
Reinforced plastics - GFK / CFK
16
RT 100 InoxPro, 7xD - Series 8514
Free-cutting steels < 25 < 255 460 0.005 0.006 0.008 0.010 0.012 0.014 0.016 0.017 0.020
< 32 < 301 410 0.004 0.006 0.007 0.009 0.011 0.012 0.014 0.016 0.019
Unalloyed heat-treatable steels < 20 < 220 395 0.004 0.005 0.007 0.009 0.010 0.012 0.013 0.015 0.017
< 25 < 255 395 0.004 0.005 0.007 0.009 0.010 0.012 0.013 0.015 0.017
< 32 < 301 345 0.004 0.005 0.006 0.008 0.009 0.010 0.012 0.013 0.015
Alloyed heat-treatable steels < 32 < 301 375 0.004 0.005 0.006 0.008 0.009 0.011 0.012 0.014 0.016
< 43 < 402 330 0.003 0.004 0.006 0.007 0.008 0.009 0.010 0.011 0.014
Unalloyed case hardened steels < 25 < 255 410 0.004 0.006 0.007 0.009 0.011 0.012 0.014 0.016 0.019
Alloyed case hardened steels < 32 < 301 375 0.004 0.005 0.006 0.008 0.009 0.011 0.012 0.014 0.016
< 43 < 402 375 0.004 0.005 0.006 0.008 0.009 0.011 0.012 0.014 0.016
Nitriding steels < 32 < 301 330 0.003 0.004 0.006 0.007 0.008 0.009 0.010 0.011 0.014
< 43 < 402 280 0.003 0.004 0.005 0.006 0.007 0.008 0.009 0.010 0.012
Tool steels < 25 < 255 375 0.004 0.005 0.006 0.008 0.009 0.011 0.012 0.014 0.016
< 43 < 402 280 0.003 0.004 0.005 0.006 0.007 0.008 0.009 0.010 0.012
High speed steels < 43 < 402 245 0.003 0.004 0.005 0.006 0.007 0.009 0.010 0.011 0.013
Spring steels < 38 < 354 215 0.003 0.003 0.004 0.006 0.006 0.007 0.008 0.009 0.011
< 48 < 460
Hardened steels
< 66 -
< 28 < 273
Stainless steels, sulphured 230 0.002 0.003 0.004 0.004 0.005 0.006 0.007 0.007 0.009
austenitic < 36 < 337 280 0.002 0.003 0.004 0.005 0.006 0.007 0.008 0.009 0.010
martensitic < 46 < 435 310 0.003 0.003 0.005 0.006 0.007 0.008 0.009 0.010 0.012
< 23 < 242
Cast iron
< 38 < 354
< 23 < 242
Spheroidal graphite iron and
< 38 < 354
malleable cast iron
< 38 < 354
Chilled cast iron
< 20 < 220
New cast materials GGV
< 32 < 301
< 32 < 301
New cast materials ADI
< 43 < 402
Special alloys < 54 < 549 165 0.002 0.002 0.003 0.004 0.005 0.006 0.006 0.007 0.008
< 25 < 255
Ti and Ti-alloys 195 0.002 0.002 0.003 0.004 0.005 0.006 0.006 0.007 0.008
< 43 < 402 150 0.002 0.002 0.003 0.003 0.004 0.004 0.005 0.006 0.006
Duroplastics
Thermoplastics
Reinforced plastics - Kevlar
Reinforced plastics - GFK / CFK
17
M ILLS
E NDameter
D E /32” di
BI om 1
R g fr
illi n
CA
m
ce
er f R
an
rm
Hig VE
o
-DI
h-p
MICRO
MICg MTM
Fe a
t u r in
RO H3-Z
THhelical
EA
R
dr
ill / D
rea
th MI
dm
illi n
LLS
gc
ut te
rs
18
MICR
O-
D esig PR
for EC
ned
inl IS
st a
ss e
IO ls, st
st
ee
N a r ti n g
DR at 0.5m
ILL m
S VA
G
RIN
ders
BO
hol
nd
sa
ON
er t
ins
I
SI
g
EC
r in
fe
am
- PRg and ch
R O in
MI Crooving, bo
r
19
Ratio drills
Solid carbide drill RT 100 InoxPro
Guhring, Inc. Main Office Michigan Manufacturing and Guhring Corp. (Canada)
1445 Commerce Avenue Reconditioning Facility 20 Steckle Place, Unit #14
Brookfield, WI 53045 24975 Trans-X Road Kitchener, ON N2E 2C3
Tel (262) 784-6730 (800) 776-6170 Novi, MI 48375 Tel (519) 748-9664 (800) 463-5555
Fax (262) 784-9096 Fax (519) 748-2954
No liability can be accepted for printing errors or technical changes of any kind.
Our Conditions of Sale and Terms of Payment apply. Available on request.
20