Professional Documents
Culture Documents
POWER Cn Jv Jr
In Imax Iad Iast cos ϕ h%
-1
min
[HP] [Kw] [Nm] [A] [Kgm2 ]
3 2,2 6,4 3300 6,7 8,5 19,4 10,7 0,0053 0,0026 0,76 68%
4 2,9 8,5 3320 7,8 10,0 22,6 12,1 0,0053 0,0026 0,78 67%
6,5 4,7 13,6 3360 12,1 16,6 35,1 17,9 0,0053 0,0039 0,76 67%
8 5,8 16,6 3380 14,9 21,9 43,2 22,1 0,0105 0,0049 0,77 70%
10,5 7,7 21,7 3400 18,0 25,9 52,2 26,3 0,0142 0,0065 0,84 72%
13 9,5 26,7 3420 20,7 26,9 60,0 29,8 0,0224 0,0112 0,86 75%
15 11,0 30,2 3490 24,2 30,0 70,2 34,4 0,0224 0,0112 0,86 75%
17 12,5 34,6 3450 26,6 35,5 77,1 37,8 0,0291 0,0119 0,85 77%
20 14,7 41,1 3420 31,0 44,4 89,9 44,3 0,0291 0,0119 0,87 76%
25 18,4 51,0 3420 48,0 67,0 144,0 69,5 0,0291 0,0123 0,85 76%
30 22,0 61,6 3420 52,0 72,0 155,0 75,5 0,0291 0,0123 0,86 76%
40 29,4 80,5 3490 59,5 85,9 172,2 86,3 0,0584 0,0324 0,85 77%
50 36,8 101,2 3470 77,5 103,9 224,8 112,4 0,0584 0,0412 0,87 72%
60 44,1 122,2 3450 86,9 115,0 252,0 134,4 0,0584 0,0485 0,85 77%
70 51,5 143,8 3490 101,7 133,4 294,9 155,6 0,0584 0,0530 0,87 76%
80 58,8 163,3 3440 117,4 166,0 340,5 182,0 0,0584 0,0647 0,84 85%
Cn = rated torque
V = revolution speed
In = rated current
Iad = starting current (direct starting)
Iast = starting current (star/delta starting)
Imax = maximum overload current
Jv = moment of inertia of the fly-wheel
Jr = moment of inertia of the rotor
stator windings
LINE VOLTAGE direct starting
star/delta starting
delta connection star connection
208 V~ 208/360 — 208/360
220 V~ 220/380 — 220/380
380 V~ 380/660 220/380 380/660
For data not included in this data sheet please contact GMV
In = rated current
Iad = starting current (direct starting)
Iast = starting current (star/delta starting) = In x K
Imax = maximum overload current
The motors GMV are designed, accordint to the rules IEC 34-1 (EN60034-1), IEC 60038, for use on European
electrical mains of 230/400V ± 10% - 50Hz. That means that the same motor can operate within the following limits:
For data not included in this data sheet please contact GMV