Professional Documents
Culture Documents
www.sokoyosolar.com
Date: 2021.07.16
Email: ky101@sokoyo.com.cn
General Proposal
Solar Street Light Structure
Quantity 15 sets
Delivery time 50~55 days after receiving deposit (Bulk cargo for 10 pcs)
2 / 24
Product Advantages
Unique Integrated Design
Counter on famous international brands to maintain higher quality and longer life
span
Smart monitoring system automatically adjusts power effectively and extends the
battery life
Climate Resistance
Be capable to work well in high temperature, long rainy days and severe dust
weather
3 / 24
GENERAL INFORMATION
WORKING MODE
3 hours 100% brightness + 6 hours 50% brightness+ 3 hours 20% brightness (motion sensor)
4 / 24
1.Solar Panel
Technical Parameters
Silicon Type Mono crystalline
Pmax 190W
Tolerance ±3%
Vmp 36V
Imp 5.14A
Voc 43.2V
Isc 5.83A
5 / 24
2.LED lamp
Product Design
6 / 24
Technical Parameters
CRI Ra≥70
Color Temperature 3000K~6500K
7 / 24
Light Source IES Test Report
8 / 24
Lamp Structure
Lamp Size
9 / 24
3.LifePO4 Battery & Controller Integrated Unit
10 / 24
LifePO4 Battery Details
Advantages
Long life, good shock resistance, Low self-discharge and good discharge performance at low
temperature
Strong charging acceptance, quick-charging capability, Strong over-discharge resistance
Excellent large current discharge performance, and have obvious advantages in startup and
climbing
11 / 24
Capacity 80.0AH/12.8V
Type LifePO4
Efficiency >95%
12 / 24
Lithium Battery Charts
13 / 24
Intelligent Wireless Dimming LED Solar Charge Controller
No Load Loss 11mA for 12V system 21mA for 24V system
IP Rate IP68
Life Span
>5 years
14 / 24
Working Principle Light switch-on & time switch-off & Motion Sensor
Wiring Diagram
15 / 24
Features
1. New design of wireless remote-control can modify the controller parameter and read the system
message
according to the handhold device.
2. Digital high precision constant-current control, the maximum efficiency can reach 96%.
3. The working current can be adjusted from 0.15A to 3.96A, the regulating precision is 30mA.
4. High dynamic performances of load insure current output stability even though the battery
voltage and load sudden change.
5. 3 section time frame dimming function design, work time can be set range from 0h to 15 hours,
power can be set range from 0% to 100%.
6. Intelligent power mode, the load power can be adjust automatically according to the battery
power, can extend the maximum working time of the battery.
7. Record the system status, can record at a max 7days and monitor the whole system.
8. The true constant current but not limited the current, insure the current output stability thus
decrease LED light failure, increase the LED service life.
9. Metal case, IP68 waterproof degree, can suitable use in all kinds of bad conditions.
10. With modified calculation of charging, the charging efficiency is improved, which lengthen the
using time of solar energy.
11. Overheat preventing function, above a certain temperature will decrease the load or close the
load.
12. Varies system protection function. Including the battery reverse connection, LED short circuit,
open circuit protection and so on.
16 / 24
Microwave Sensor
Sensitive time delay can be set range from 0s~150s
Sensor Dimension
Installation Instruction
17 / 24
Sensor Range
Life Span
>25years
18 / 24
19 / 24
Pole Finishing
Welding
No crack, no leakage welding or bite edges, smooth welding without the concavo-convex
fluctuation or any welding defects.
Inside and outside surface anti-corrosion treatment by hot dipping acid. Zinc coating is more than
85 um thick, which is in accord with GB/T13912-92 standard. Galvanized surface is smooth and
with the same color, flake peeling hasn’t been seen after maul test.
Powder Coating
Pure polyester plastic powder coating is stable, and with strong adhesion & strong ultraviolet ray
resistance. Film thickness is more than 100um and with strong adhesion. The surface is not peeling
even with blade scratch (15*6mm square). Surface is smooth and color and luster are identical.
20 / 24
Foundation Kit Parameters
Assembly Instruction
21 / 24
5.Packing
All-In-one Lamp / Packed with CTN
22 / 24
Foundation Kit / Packed with bubble film
Maintenance
Our solar street lights are essentially maintenance free. However, in certain regions with heavy
dust, snow or extreme dry weather with little rain, some lever of maintenance is required.
Every Week: Inspect street lights to ensure all lights are working. If there are unlit lights,
analyze the cause and conduct repairs.
Every 2~6 Months: Inspect and clean solar panels which are covered with dust or sand. The
best tool to clean is a brush with a long pole. Cares should be done to avoid damage
Every 5-10 Years: Replace the solar street light batteries if the voltage drops below normal
levels. The battery has an expected life of 5-10 years.
23 / 24
Problems or Trouble Shooting & Solution
24 / 24