Details of Work Close pipe hole using foam/silicone
Date 20 / 03 / 2024 Location WTB
No Sequence of Work 1. Close pipe hole - The area must be clean, healthy and homogeneous, free from oil, grease particles, dust and loose or friable. - Fill the silicone can well for at least 20 seconds before using. Repeat shaking after a long break in use. - The amount of Foam ejected can be adjusted by applying more or less pressure to the trigger or by tightening or loosening the valve screw. - Fill in the gaps enough if too excessive will wasteful use. Let dry up And excess dried silicone can cut And sanded For tidy up 2. Grating Removal Floor - Prepare Tools be used ( chain block, tripod ) - make sure there is no damage to the tool that could cause an accident - Place the chain block on the floor to be opened - lift the floor slowly using chain block and place it slowly - store it and make sure it is safe from the danger of falling 3. Confined Space - Prepare tools for working in confined space area - Do the gas test before entry - Prepare fbh and attach the rope for guide rope - Fill the confined spaece log entry - Make sure 1 person standby to monitoring condition inside or outside manhole Equipment, tools and machinery to be used: - Dc lamps - DC lamps - Tripods - ERP - Blower - rope - Access The chemical to be used: - silicone
Responsible Person/Supervisor for the activity
Prepared by Matmarfan (Foreman) Reviewed by R. ADI. P (Supervisor/Engineer) Approved by (Area D. O. LEE Authority) Approved by PTW Team