Professional Documents
Culture Documents
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
RA 21010/03.05 1/68
2-way cartridge valves Replaces 06.98
Directional functions
Cartridge valves and control covers
Sizes 16 to 160 Control cover type LFA 25 WEA-7X/… Cartridge valve type LC 25
Component series 2X; 6X; 7X with directional valve type 4WE 6 A40E7X/…
Maximum operating pressure 420 bar (6092 PSI) D6X/EG24N9K4 and cable socket
Maximum flow 25000 L/min (6604 GPM)
List of contents
Directional function 4
X
2-way cartridge valves mainly consist of a control cover (1) and
a cartridge element (2). The control cover is provided with pilot 3
bores and, depending on the required overall function, optionally
a stroke limiter, a hydraulically controlled directional poppet valve 2
or a shuttle valve. Moreover, electrically operated directional
spool valves or directional poppet valves can be mounted onto 8
the control cover. The cartridge consists of a bushing (3), a ring B
(4) (up to size 32 only), a valve poppet (5), optionally with damp-
ing nose (6) or without damping nose (7) and a closing spring 6
(8).
A
Function
2-way cartridge valve operate in dependence upon pressure. 5; 7
A1 ↑ 100%
Three pressurised areas are essential for the function: A1, A2,
A3. The area of the valve seat is always taken as 100%. As a Sizes 16 to 32
result of the stepping, the annulus area A2 is 7% or 50% of
area A2, depending on the version. Consequently, the area ratio A2 ↑ 7% (50%)
A1: A2 is either 14.3:1 or 2:1. Area A3 is equal to the sum of
areas A1 + A2. Due to the different area ratios A1: A2 and the
resulting different annulus areas (A2), area A3 is either 107% or
150% of area A1 on the seat that is assumed to be 100%. A3 ↓ 107% (150%)
The following is generally valid:
Areas A1 and A2 act in the direction of opening. Area A3 and
the spring act in the direction of closing. The effective direction
of the force resulting from the opening and closing forces deter- 1
mines the spool position of the 2-way cartridge valve.
The medium can flow through 2-way cartridge valves from A to
B or from B to A. When area A3 is pressurised due to the pilot X
oil flow from channel B or external pilot oil supply, channel A is
leak-free closed. 3
2
8
B
6
A
5; 7
A1 ↑ 100%
Sizes 40 to 160
A2 ↑ 7% (50%)
A3 ↓ 107% (150%)
4/68 Bosch Rexroth Corp. | Industrial Hydraulics LC; LFA | RA 21010/03.05
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Mounting cavity and connection dimensions to DIN ISO 7368: except for sizes 125 and 160 –
nominal dimensions in millimeters (inches)
T
W 7 1
Z
ØD1H7
A X = Rz1max 4
°
15
H7
H8
X Y = Rz1max 8
Y
H1(H1*)
H3±0.1 (0.0039)
Z = Rz1max 10
H2+0.1 (0.0039)
ØD3(D3*)
H6
°
15
B
Z
6
Size 16 to 63
L1
H9
L2±0.2 (0.0079)
A H5
ØD7H13, 10 L5±0.2 (0.0079) 4 x D5, H4
ØD2 5
3 2 4 7 1
L3±0.2 (0.0079)
L4±0.2 (0.0079)
ØD4H7 0.05
A
Z1
(0.002)
L2±0.2 (0.0079)
x Y
For indication of dimensions and explanation of positions,
L1
L4±0.2 (0.0079)
see page 9!
5
°
8 x D5; H4 Z1 Rmax16
Ø62 (2.44)H11
±0.3 (±0.00118)
X Y Rmax8 RZ20
ØD6 max. RZ12
(X, Y, Z1, Z2)
L2
(0.177+0.004)
Z2
4.5+0.1
°
°
(8.47±0.0079)
45°
Y1
215±0.2
48
Z1
0
)
18
45
300±0.3 (11.8±0.0118)
(1
22.5°
.01
Y1
°
8.9
5 ±0
380 (14.96)
X
)
5.7
Y
22.5°
(1
(8.47±0.0079)
.3
165±0.2 (6.5±0.079)
X Y
215±0.2
0 ±0
40
Ø32
°
45
(1.26) max.
(X, Y, Y1) Z2
°
45
12 x M42, 74
45±0.2 (1.77±0.0079) Ø9 (0.35), 8 x M36, 62 60±0.2 (2.36±0.0079) Ø9 (0.35), 10
10 5 5
RA 21010/03.05 | LC; LFA Industrial Hydraulics | Bosch Rexroth Corp. 5/68
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Mounting cavity and connection dimensions to DIN ISO 7368: except for sizes 125 and 160 –
nominal dimensions in millimeters (inches)
Technical data (for applications outside these parameters, please consult us!)
1)
Suitable for NBR and FKM seals For the selection of filters, see data sheets RE 50070,
2)
Suitable for FKM seals only RE 50076, RE 50081, RE 50086 and RE 50088.
3)
The cleanliness classes specified for components must be
adhered to in hydraulic systems. Effective filtration prevents
malfunction and, at the same time, increases the service life of
components.
RA 21010/03.05 | LC; LFA Industrial Hydraulics | Bosch Rexroth Corp. 7/68
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
LC /
Size 16 (series 7X) = 16 No code = NBR seals
Size 25 (series 7X) = 25 V= FKM seals
Size 32 (series 7X) = 32 (Other seals on enquiry)
Size 40 (series 7X) = 40 Caution!
Size 50 (series 7X) = 50 Observe compatibility of seals with hydraulic
Size 63 (series 7X) = 63 fluid used!
Size 80 (series 6X) = 80
7X = (Sizes 16 to 63) component series 70 to 79
Size 100 (series 6X) = 100
(70 to 79: unchanged installation and connection dimensions)
Size 125 (series 2X) = 125
6X = (Sizes 80 and 100) component series 60 to 69
Size 160 (series 2X) = 160
(60 to 69: unchanged installation and connection dimensions)
Area ratio 2:1 (annulus area = 50%) =A 2X = (Sizes 125 and 160) component series 20 to 29
Area ratio 14x3:1 (annulus area = 7%) =B (20 to 29: unchanged installation and connection dimensions)
Cracking pressure approx. 0 bar (without spring) = 00 E= Valve poppet without damping nose
Cracking pressure approx. 0.5 bar (7.25 PSI) = 05 D= Valve poppet with damping nose
Cracking pressure approx. 1.0 bar (14.5 PSI) = 10
Cracking pressure approx. 2 bar (29 PSI) = 20
Cracking pressure approx. 3 bar (43.5 PSI) = 30
(size 125 only)
Cracking pressure approx. 4 bar (58 PSI) = 40
(not with sizes 125 and 160)
For exact values, see page 8.
Standard types
Type LC (cartridge valve) Material number Type LC (cartridge valve) Material number
LC 16 A20D7X/ R900912572 LC 40 A20D7X/ R900937999
LC 16 A20E7X/ R900910269 LC 40 A20E7X/ R900938000
LC 16 A40D7X/ R900912573 LC 40 A40D7X/ R900935732
LC 16 A40E7X/ R900912568 LC 40 A40E7X/ R900927973
LC 16 B20E7X/ R900912595 LC 40 B20E7X/ R900938007
LC 25 A20D7X/ R900912580 LC 50 A20D7X/ R900938026
LC 25 A20E7X/ R900910270 LC 50 A20E7X/ R900920273
LC 25 A40D7X/ R900912581 LC 50 A40D7X/ R900938027
LC 25 A40E7X/ R900912574 LC 50 A40E7X/ R900929935
LC 25 B20E7X/ R900912604 LC 50 B20E7X/ R900929665
LC 25 B40D7X/ R900912609 LC 63 A20D7X/ R900938058
LC 25 B40E7X/ R900912601 LC 63 A20E7X/ R900928826
LC 32 A20D7X/ R900912589 LC 63 A40D7X/ R900938059
LC 32 A20E7X/ R900906337 LC 63 A40E7X/ R900933230
LC 32 A40D7X/ R900909665 LC 63 B20E7X/ R900938064
LC 32 A40E7X/ R900909662
LC 32 B20E7X/ R900912613
LC 32 B40D7X/ R900912617
LC 32 B40E7X/ R900912610
8/68 Bosch Rexroth Corp. | Industrial Hydraulics LC; LFA | RA 21010/03.05
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Technical data (for applications outside these parameters, please consult us!)
Technical data (for applications outside these parameters, please consult us!)
10 (145) 10 (145)
NG16 NG25 NG32 NG16 NG25
NG32
Pressure differential in bar (PSI)
6 (87) 6 (87)
4 (58) 4 (58)
2 (29) 2 (29)
0 0
0 200 400 600 800 1000 1200 0 200 400 600 800 1000 1200
(53) (106) (159) (212) (265) (318) (53) (106) (159) (212) (265) (318)
Flow qv in L/min (GPM) Flow qv in L/min (GPM)
10 (145) 10 (145)
NG40 NG50 NG40
Pressure differential in bar (PSI)
8 (116) 8 (116)
NG50
6 (87) 6 (87)
NG63
4 (58) 4 (58)
NG63
2 (29) 2 (29)
0 0
0 500 1000 1500 2000 2500 3000 0 500 1000 1500 2000 2500 3000
(132) (264) (396) (528) (660) (792) (132) (264) (396) (528) (660) (792)
Flow qv in L/min (GPM) Flow qv in L/min (GPM)
10 (145) 10 (145)
NG80 NG100 NG125 NG80 NG100 NG125
NG160
Pressure differential in bar (PSI)
Pressure differential in bar (PSI)
8 (116) 8 (116)
6 (87) 6 (87)
NG160
4 (58) 4 (58)
2 (29) 2 (29)
0 0
0 4000 8000 10000 16000 20000 0 4000 8000 10000 16000 20000
(1060) (2120) (2650) (4240) (5300) (1060) (2120) (2650) (4240) (5300)
Flow qv in L/min (GPM) Flow qv in L/min (GPM)
RA 21010/03.05 | LC; LFA Industrial Hydraulics | Bosch Rexroth Corp. 11/68
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
1) 2) 3) 4)
x = available LFA – /
• = on inquiry
Component series
control port
El. monitor
for closed
Area ratio
Damping
pressure
Cracking
material
position
Remote
Size Nozzles in channel 5)
Seal
Type
The ordering code can be found on the relevant pages of the individual control cover variants
x x 6X
x x 2X
x x x x x x x x x x D F x
x x x x H1 F x
x x x x x x x x x x H2 F x
x x x x H3 F x
x x x x x x x x H4 F x
x x x x x x x x G x x
x x x x x x x R x
x x x x x RF x
x x R2 x
x x x x x x x x • • WEA x x x
x x x x x x x x • • WEB x x x
x x x x x x WEMA x x x
x x WEA8 x x x
x x x x x x WEMB x x x
x x WEB8 x x x
x x x x x x WECA x x x x
x x WEA9 x x x x
x x x x x x x x GWA x x x
x x x x x x x x GWB x x x
x x x x x x x x KWA x
x x x x x x x x KWB x
x x x x x x • • • • E x x D QMG24 F x
x x x x x x • • EH2 x x D QMG24 F x
x x x x x x EWA x x D QMG24 x x x
x x x x x x EWB x x D QMG24 x x x
1) 3)
7X = component series 70 to 79, 10 = 1.0 bar cracking pressure
6X = component series 60 to 69 and 20 = 2.0 bar cracking pressure
2X = component series 20 to 29: (unchanged installation and 40 = 4.0 bar cracking pressure
connection dimensions) 4)
D = valve poppet of the cartridge with damping nose
2)
CA = 2 : 1 (area ratio A1:A2) 5)
Order of nozzles and their representation in symbols and
CB = 14.3 : 1 (area ratio A1:A2) circuit diagrams.
CD = 0 %
For the control cover with electrical monitor of the closed Further details can be found on the relevant pages of the indi-
position (including position switch), the type designation vidual control cover variants and on page 14 (nozzle charac-
includes the version of the control cover and the cartridge teristic curves).
valve).
Standard types, see page 12.
12/68 Bosch Rexroth Corp. | Industrial Hydraulics LC; LFA | RA 21010/03.05
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Nozzle symbol Symbol in the ordering code Nozzle symbol Symbol in the ordering code
This nozzle is designed as screw-in nozzle. If a nozzle is to be This nozzle is designed as a drilling; no entries are required in
installed, the relevant code letter must be entered in the type the type designation. [Nozzle Ø in mm (in)]
designation together with the nozzle Ø in 1/10 mm (0.004 in.).
Examle: A12 = nozzle with Ø1.2 mm (0.047 in.) in channel A.
Nozzle symbol Symbol in the ordering code
Z12
Standard types
Type LFA (control cover) Material number Type LFA (control cover) Material number
LFA 16 D-7X/F R900912625 LFA 40 D-7X/F R900938073
LFA 16 H2-7X/F R900912655 LFA 40 H2-7X/F R900938122
LFA 16 WEA-7X/ R900910271 LFA 40 WEA-7X/ R900931581
LFA 16 GWA-7X/ R900912636 LFA 40 GWA-7X/ R900938114
LFA 16 E-7X/CA40DQMG24F R900912619 LFA 40 E-7X/CA40DQMG24F R900938107
LFA 25 D-7X/F R900905302 LFA 50 D-7X/F R900938150
LFA 25 H2-7X/F R900912694 LFA 50 H2-7X/F R900938205
LFA 25 WEA-7X/ R900910273 LFA 50 WEA-7X/ R900938215
LFA 25 GWA-7X/ R900912675 LFA 50 GWA-7X/ R900938200
LFA 25 E-7X/CA40DQMG24F R900912670 LFA 50 E-7X/CA40DQMG24F R900938197
LFA 32 D-7X/F R900905303 LFA 63 D-7X/F R900938225
LFA 32 H2-7X/F R900912728 LFA 63 H2-7X/F R900938250
LFA 32 WEA-7X/ R900912712 LFA 63 WEA-7X/ R900938257
LFA 32 GWA-7X/ R900912708 LFA 63 GWA-7X/ R900938245
LFA 32 E-7X/CA40DQMG24F R900912703 LFA 63 E-7X/CA40DQMG24F R900938242
RA 21010/03.05 | LC; LFA Industrial Hydraulics | Bosch Rexroth Corp. 13/68
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
X X X Z1 Z2
B B B
A A A
A B
A B
P T
P T
P** T**
X.. Z12 P** A** T** F**
F**
X Z1 Y X Y X Z1 Z2 Y
B B B
A A A
A B A B
A B
P T P T
P T P.. A**
P** A** T**
A** P** T**
B** X..
X Z1 Y X Z1 Y X Z1 Y
B B B
A A A
14/68 Bosch Rexroth Corp. | Industrial Hydraulics LC; LFA | RA 21010/03.05
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
The symbols used in the description of types below are Bosch Rexroth standards!
A B
P T
P** T** A**
X X** X X**
X X X Y
B B B
A A A
5.0
(0.197)
50 (725)
40 (580) 6.0
30 (435) (0.236)
20 (290)
8.0
10 (145) (0.315)
5 (72.5)
4 (58)
3 (43.5)
2 (29)
1.4 (20.3)
1.0 (14.5)
0.7 (10.2)
0.5 (7.25)
0.35 (5.08)
0.25 (3.63)
0.05 0.1 0.2 0.5 2 4 10 20 40 100
(0.01) (0.03) (0.05) (0.13) (0.53) (1.06) (2.64) (5.28) (10.57) (26.42)
Flow qv in L/miin (GPM)
Material number
Standard nozzle Nozzle Ø
for size in mm (in.) M6 tap. M8 x 1 tap. G3/8 G1/2
0.5 (0.020) R900157933 R900157930 — —
0.6 (0.023) R900157934 R900149430 — —
0.7 (0.028) R900157931 R900143957 — —
16 0.8 (0.032) R900152276 R900136843 R900159043 —
25 1.0 (0.039) R900149335 R900136842 R900159033 R900139115
32 1.2 (0.047) R900152286 R900139101 R900159032 R900150714
40 1.5 (0.059) R900148823 R900133712 R900159031 R900139117
50 1.8 (0.071) R900157932 R900150953 R900159030 R900159026
63 and 80 2.0 (0.079) R900156650 R900137299 R900159029 R900148352
100 2.5 (0.098) R900157929 R900137445 R900146259 R900148353
3.0 (0.118) R900181894 R900144761 R900149044 R900148361
3.5 (0.138) — R900136079 R900146258 R900159027
4.0 (0.158) — R900802480 R900149052 R900149939
5.0 (0.197) — — R900152287 R900143775
6.0 (0.236) — — R900135774 R900147875
8.0 (0.315) — — — R900159028
Plug screw R900023986 R900003443 R900006325 R900006445
16/68 Bosch Rexroth Corp. | Industrial Hydraulics LC; LFA | RA 21010/03.05
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
General notes on the ordering code for control covers (pilot control valves)
Control cover with or without remote control port: Type ..D… – nominal dimensions in mm (inches)
Sizes 16 to 63 1 2 3 4 9 14 17
LFA D – 7X / F
X X X**
X X
B B
A A
H4
D2
D1; T1
Size 16 25 32 40 50 63
G1/8 G1/4 G1/4 G1/2 G1/2 G3/4
X** D1 (SAE-4; (SAE-6; (SAE-6; (SAE-8; (SAE-8; (SAE-12;
H1
X D2 1) M6 M6 M6 M8 x 1 M8 x 1 G3/8
H3
27 30 35 60 68 82
H1
(1.06) (1.18) (1.38) (2.36) (2.68) (3.23)
4 (0.16) 12 16 16 30 32 40
H2
2 (0.079)
32.5 42.5 50 72 80 90
X L2
(1.28) (1.67) (1.97) (2.84) (3.15) (3.54)
8 12 12 14 14 16
L2
T1
(0.32) (0.47) (0.47) (0.55) (0.55) (0.63)
1)
For ordering codes for nozzles, see pages 14 and 15.
* SAE dimensions for LFA.../.../12 covers.
4 3 1
1 Nameplate for sizes 16, 25
2 Nameplate for size 32
3 Nameplate for sizes 40, 50, 63
4 Port X optionally as threaded connection
18/68 Bosch Rexroth Corp. | Industrial Hydraulics LC; LFA | RA 21010/03.05
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Control cover with or without remote control port: Type ..D… – nominal dimensions in mm (inches)
Sizes 80 to 160 1 2 3 4 9 14 17
1)
LFA D– / F
X X X**
X X
B B
A A
D2
H4
D3; T1
24 31 42
H4 —
(0.95) (1.22) (1.65)
1 16 18 20 20
T1
(0.63) (0.71) (0.79) (0.79)
2)
For ordering codes for nozzles, see page 14 and 15.
* SAE dimensions for LFA.../.../12 covers.
1 Nameplate
2 Port X optionally as threaded connection
RA 21010/03.05 | LC; LFA Industrial Hydraulics | Bosch Rexroth Corp. 19/68
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Control cover with stroke limiter and remote control port: Type ..H… – dimensions in mm (inches)
Size 16 to 40 1 2 3 4 9 14 17
LFA – 7X / F
12 = SAE threaded external connections
Size Remote Nozzle in channel
and UNC mounting bolts
16 25 32 40 Control control port (Ø in 1/10 mm [0.004”]) –= Metric threaded connections
x x x x H1 F X** No code = NBR seals
x x x x H2 F X** V= FKM seals
x x x x H3 F X** (Other seals on enquiry)
x x x x H4 F X** Caution!
Observe compatibility of seals with
hydraulic fluid used!
Nozzle possible; indicate, if required
X X X**
X X
B B
A A
Control Control
“H3” “H4”
Ø46 Ø46
(1.81) (1.81)
18 (0.71)
Control “H1” Control “H2”
Sizes 16 and 25 Sizes 32 and 40
ØD3
SW1
SW1 4 5 6 4 5 6
SW2 SW2
SW2
H6
D1; T1
H7
H4
D2
H5
H5
X** Ø38
H1
(1.50)
H2
X
H3
Size 16 25 32 40
2 (0.079)
Control cover with stroke limiter and remote control port: Type ..H… –
nominal dimensions in mm (inches)
Sizes 50 and 63 1 2 3 4 9 14 17
LFA – 7X / F
X X X**
X X
B B
A A
Control “H4”
Ø40
3 (1.58) SW3
SW1
SW2
H5
D1; T1
D2
Ø70
28 (1.10)
H4
X**
H1
(2.76)
H2
X 1 (0.04)
H3
Size 50 63
4 (0.16)
D1 G1/2 (SAE-8; 3/4-16) G3/4 (SAE-12; 1-1/16-12)
D2 1) M8 x 1 G3/8
H1 110 (4.33) 125 (4.92)
H2 32 (1.26) 40 (1.58)
H3 34 (1.34) 50 (1.97)
H4 max 156 (6.14) 175 (6.89)
L1
L2 80 (3.15) 90 (3.54)
T1 14 (0.55) 16 (0.63)
A/F1 2) 17 (0.67) 24 (0.94)
A/F2 55 (2.17) 65 (2.56)
2 1 A/F3 2) 19 (0.75) 19 (0.75)
A/F4 5 (0.20) 5 (0.20)
1 Nameplate 3 Scale
1)
2 Port X optionall as 4 Secured by means of locknut For ordering codes for nozzles, see page 14 and 15.
2)
threaded connection Hexagon socket
RA 21010/03.05 | LC; LFA Industrial Hydraulics | Bosch Rexroth Corp. 21/68
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Control cover with stroke limiter and remote control port: Type ..H… – dimensions in mm (inches)
Sizes 80 to 160 1 2 3 4 9 14 17
1)
LFA – / F
12 = SAE threaded external connections
Size Control Remote Nozzle in channel and UNC mounting bolts
80 100 125 160 control port (Ø in 1/10 mm [0.004”]) –= Metric threaded connections
x x x x H2 F X** No code = NBR seals
x x H4 F X** V= FKM seals
Nozzle possible; indicate, 1)
(Other seals on enquiry)
6X = series 6X (sizes 80, 100)
if required 2X = series 2X (sizes 125, 160) Caution!
Observe compatibility of seals with
hydraulic fluid used!
X X
B B
A A
Control “H2” Control “H4”
Size 160 Sizes 80 and 100
H7 5)
SW4
Control “H2” SW3
SW3 3
Sizes 80 to 125
H7 5)
SW2 SW4
3
2 21 0 98
SW1
H6
D3; T1
H5
H5
H1
X**
H4
D2
H2
X
H3
Control cover with integrated shuttle valve: Type ..G… – nominal dimensions in mm (inches)
Sizes 16 to 63 1 2 3 4 9 14 17
LFA G – 7X /
X Z1 Z2 X Z1 Z2 X Z1 Z2
B B B
A A A
D1 L4 D3; 14 (0.55)
3
H4
Size 16 25 32 40 50 63
Ø1.2 Ø1.5 Ø2.0
D1 M6 M8 x 1 M8 x 1
(0.047) (0.059) (0.079)
H1
X Z1 D3 — — — — G1/2 G1/2
H3
35 30 35 60 68 82
H1
(1.38) (1.18) (1.38) (2.36) (2.68) (3.23)
17 17 21.5 30 32 42
D2 5 H2
4 (0.67) (0.67) (0.85) (1.18) (1.26) (1.65)
2 (0.079)
15 24 28 32 34 50
D3; 14 (0.55) H3
1 (0.59) (0.95) (1.10) (1.26) (1.34) (1.97)
12 16
L5 L3 H4 — — — —
4 (0.16)
(0.47) (0.63)
32 40
H5 — — — —
(1.26) (1.58)
Z1
65 85 100 125 140 180
L1
(2.56) (3.35) (3.94) (4.92) (5.51) (7.09)
L1
(2.84) (3.19)
Z2
72 90
4 (0.16)
L4 — — — —
(2.84) (3.54)
4.5 4 1 6 4
L5 —
(0.18) (0.16) (0.039) (0.24) (0.16)
2
1 Nameplate for sizes 16, 25, 32 4 Shuttle valve
2 Nameplate for sizes 40, 50, 63 5 D2 for sizes 16 to 40
3 Ports Z1 and Z2 optionally as 6 D2 for sizes 50 and 63
threaded connection for sizes
50 and 63
RA 21010/03.05 | LC; LFA Industrial Hydraulics | Bosch Rexroth Corp. 23/68
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Control cover with integrated shuttle valve: Type ..G… – nominal dimensions in mm (inches)
Sizes 80 to 100 1 2 3 4 14 15 16 17
LFA G – 6X /
12 = SAE threaded external connections
Nozzle in channel (Ø in 1/10 mm [0.004in.]) and UNC mounting bolts
–= Metric threaded connections
Size X F Z1
80 X20 (0.79) F** Z20 (0.79) No code = NBR seals
V= FKM seals
100 X20 (0.79) F** Z20 (0.79) (Other seals on enquiry)
Standard nozzle – not shown in the type designation Caution!
Nozzle possible; indicate, if required Observe compatibility of seals with
hydraulic fluid used!
For ordering codes for nozzles, see page 14 and 15.
LFA . G…
Z1
X20 Z20
H4
X Z1 Z2
B
H1
X
A
H3
H2
3 (0.118)
Ø34 (1.34); 3
3
L1
M8 x 1
Z1 Z1
X M
D1
2 G1/4; 12 5
(SAE-4; 7/16-20; 0.47) M8 x 1
3 (0.118)
Z2
1 Z2
G1/2; 14
(SAE-8; 3/4-16; 0.55)
4 Ø34 (1.34); 3
H2
Control cover with integrated directional poppet valve: Type ..R…; ..RF… –
nominal dimensions in mm (inches)
Sizes 25 to 63 1 2 3 4 14 15 16 17
LFA – 7X /
12 = SAE threaded external connections
Nozzle in channel and UNC mounting bolts
(Ø in 1/10 mm [0.004 in.]) –= Metric threaded connections
Size Type X F Z1 No code = NBR seals
25 R X10 (0.39) F** Z12 (0.47) V= FKM seals
32 R X12 (0.47) F** Z12 (0.47) (Other seals on enquiry)
40 R X15 (0.59) F** Z12 (0.47) Caution!
50 R X15 (0.59) F** Z12 (0.47) Observe compatibility of seals with
hydraulic fluid used!
63 R X18 (0.71) F** Z12 (0.47)
25 RF 1) X10 (0.39) F** Z12 (0.47)
32 RF 1) X12 (0.47) F** Z12 (0.47)
40 RF 1) X15 (0.59) F** Z12 (0.47)
50 RF 1) X15 (0.59) F** Z12 (0.47)
63 RF 1) X18 (0.71) F** Z12 (0.47)
Standard nozzle – not shown in the type designation
Nozzle possible; indicate, if required
1)
Directional poppet valve with spring return
LFA . R… LFA 63 R…
sizes 25 to 50 size 63
Z1 Z12
Y
B B
A A
Z1 Z12
Y
B B
A A
2)
Max. pressure in port Y 5 bar (72.5 PSI)
RA 21010/03.05 | LC; LFA Industrial Hydraulics | Bosch Rexroth Corp. 25/68
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Control cover with integrated directional poppet valve: Type ..R…; ..RF… –
nominal dimensions in mm (inches)
Sizes 25 to 63 AZ1 3
Area ratio =
AX 1
40 (1.57)
Size Type 25 32 40 50 63
3)
D1 M6 M6 M8 x 1 M8 x 1 M8 x 1
H1
D2 3) M6 M6 M8 x 1 M8 x 1 M8 x 1
F
H2
X Z1 H1
40 50 60 68 82
(1.58) (1.97) (2.36) (2.68) (3.23)
H3
20 26 33 32 40
H2
D1 D2 (0.79) (1.02) (1.30) (1.26) (1.58)
5
24 28 32 34 50
H3
(0.95) (1.10) (1.26) (1.34) (1.97)
1 85 100 125 140 180
2 (0.079)
4 (0.16)
L1
90 (3.54) (3.35) (3.94) (4.92) (5.51) (7.09)
D1 2 1 4 3
6 3 R
(0.079) (0.039) (0.157) (0.118)
—
L2
18.5 17.5 25 24 16
RF
Z1 (0.73) (0.69) (0.98) (0.95) (0.63)
3)
For ordering codes for nozzles, see page 14 and 15.
4 (0.16)
L1
X Y 4
(3.09)
78.5
L2
Control cover with integrated directional poppet valve: Type ..R…; ..R2…–
nominal dimensions in mm (inches)
LFA – 6X /
12 = SAE threaded external connections
Nozzle in channel and UNC mounting bolts
(Ø in 1/10 mm [0.004 in.]) –= Metric threaded connections
Size Type X F Z1 No code = NBR seals
80 R X20 (0.79) F** Z12 (0.47) V= FKM seals
100 R X25 (0.98) F** Z12 (0.47) (Other seals on enquiry)
80 R2 1) X20 (0.79) F** Z12 (0.47) Caution!
100 R2 1) X25 (0.98) F** Z12 (0.47) Observe compatibility of seals with
hydraulic fluid used!
Standard nozzle – not shown in the type designation
Nozzle possible; indicate, if required
1)
Directional poppet valve with spring return
Z1 Z12 Z1 Z12
Y Y
X.. X..
F** F**
X Z1 Y 2) X Z1 Y 2)
B B
A A
2)
Max. pressure in port Y 5 bar (72.5 PSI)
RA 21010/03.05 | LC; LFA Industrial Hydraulics | Bosch Rexroth Corp. 27/68
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Control cover with integrated directional poppet valve: Type ..R…; ..R2…–
nominal dimensions in mm (inches)
X Y
H1 80 (3.15) 100 (3.94)
H3
H2 36 (1.42) 45 (1.77)
L2 H3 45 (1.77) 52 (2.05)
M8 x 1 3) L1 52 (2.05) 74 (2.91)
Z1
M8 x 13)
Y Y
D1
G1/4; 12
(SAE-4; 7/16-20; 0.47)
L1
3 1
1 Nameplate
2 Port Z1 optionally as threaded connection
3 Port Y optionally as threaded connection
28/68 Bosch Rexroth Corp. | Industrial Hydraulics LC; LFA | RA 21010/03.05
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Control cover for mounting a directional spool or poppet valve: Type ..WEA…, ..WEB… –
nominal dimensions in mm (inches)
Sizes 16 to 50 1 2 3 4 10 11 12 13 17
LFA – 7X /
M-3SED 6 UK../350…
M-3SEW 6 C../420… M-3SED 6 CK../350…
M-3SEW 6 U../420…
A A A
P T P T P T
A B A B
P T P T
X Y X Y
B B
A A
A B A B
P T P T
X Y X Y
B B
A A
RA 21010/03.05 | LC; LFA Industrial Hydraulics | Bosch Rexroth Corp. 29/68
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Control cover for mounting a directional spool or poppet valve: Type ..WEA…, ..WEB… –
nominal dimensions in mm (inches)
Sizes 16 to 50
4 5 6
M6
D1; 14 (0.55)
B A
H1
H2
X Y
14 (0.55)
H3
D1;
4 (0.16)
3 4 (0.16)
2 (0.079)
L2
1
M6
P
F3 F4
B
L1
X A Y
F2 F1
T
L3
L4
L5
L6
7 2
Size 16 25 32 40 50
1 Nameplate for sizes 16, 25, 32 G1/2 G1/2
D1 — — — (SAE-8; (SAE-8;
2 Nameplate for sizes 40 and 50
3/4-16) 3/4-16)
3 Ports X and Y optionally as threaded connection
40 40 50 60 68
for sizes 40 and 50 H1
(1.58) (1.58) (1.97) (2.36) (2.68)
4 Valve fixing scews included in the control cover‘s
30 32
scope of supply H2 — — —
(1.18) (1.26)
5 Directional spool valve type 4WE 6 D…
15 24 28 32 34
6 Directional poppet valve type M-3SEW 6 … H3
(0.59) (0.95) (1.10) (1.26) (1.34)
7 Position of ports according to ISO 4401-03-02-0-94 65 85 100 125 140
L1
(2.59) (3.35) (3.94) (4.92) (5.51)
80 85 100 125 140
L2
(3.15) (3.35) (3.94) (4.92) (5.51)
72 80
L3 — — —
(2.84) (3.15)
53 60
L4 — — —
(2.09) (2.36)
17 27 34.5 47 54.5
L5
(0.67) (1.06) (1.36) (1.85) (2.15)
47.5 64 71.5 84 91.5
L6
(1.87) (2.52) (2.81) (3.31) (3.60)
30/68 Bosch Rexroth Corp. | Industrial Hydraulics LC; LFA | RA 21010/03.05
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Control cover for mounting a directional spool or poppet valve: Type ..WEA…, ..WEB… –
nominal dimensions in mm (inches)
Size 63 1 2 3 4 10 11 12 13 17
LFA 63 – 7X /
12 = SAE threaded external connections
and UNC mounting bolts
–= Metric threaded connections
Nozzle in channel
(Ø in 1/10 mm [0.004 in.]) No code = NBR seals
Type A B P T V= FKM seals
WEA A** P** T** (Other seals on enquiry)
WEB B** P** T** Caution!
Observe compatibility of seals with
Nozzle possible; indicate, if required hydraulic fluid used!
For ordering codes for nozzles, see page 14 and 15.
M-3SED 10 UK../350…
M-3SEW 10 C../420… M-3SED 10 CK../350…
M-3SEW 10 U../420…
A A A
P T P T P T
A B A B
P T P T
X Y X Y
B B
A A
RA 21010/03.05 | LC; LFA Industrial Hydraulics | Bosch Rexroth Corp. 31/68
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Control cover for mounting a directional spool or poppet valve: Type ..WEA…, ..WEB… –
nominal dimensions in mm (inches)
Size 63
3 4 5
M8 x 1
(SAE-8; 1-1/16-12; 0.55)
G1/2; 14
B A
82 (3.23)
G1/2; 14
40
50 (1.97)
4 (0.16) 2 4 (0.16)
6
180 (7.09)
M8 x 1
F3 F4
180 (7.09)
T
X Y
B A
101 (3.98)
F2 P F1
79 (3.11)
78 (3.07)
84 (3.31) 1
1 Nameplate
2 Ports X and Y optionally as threaded connection
3 Valve fixing screws are included in the control cover‘s
scope of supply
4 Directional spool valve type 4WE 10 D…
5 Directional poppet valve type M-3SEW 10 …
6 Position of ports to ISO 4401-05-04-0-94
32/68 Bosch Rexroth Corp. | Industrial Hydraulics LC; LFA | RA 21010/03.05
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Control cover for mounting a directional spool or poppet valve: Type ..WEA…, ..WEB… –
nominal dimensions in mm (inches)
LFA – 6X /
12 = SAE threaded external connections
and UNC mounting bolts
–= Metric threaded connections
Nozzle in channel
Size Type (Ø in 1/10 mm [0.004 in.]) No code = NBR seals
80 100 A B P T V= FKM seals
x x WEA A** P** T** (Other seals on enquiry)
x x WEB B** P** T** Caution!
Observe compatibility of seals with
Nozzle possible; indicate, if required
hydraulic fluid used!
For ordering codes for nozzles, see page 14 and 15.
M-3SED 10 UK../350…
M-3SEW 10 C../420… M-3SED 10 CK../350…
M-3SEW 10 U../420…
A A A
P T P T P T
A B A B
P T P T
X Y X Y
B B
A A
RA 21010/03.05 | LC; LFA Industrial Hydraulics | Bosch Rexroth Corp. 33/68
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Control cover for mounting a directional spool or poppet valve: Type ..WEA…, ..WEB… –
nominal dimensions in mm (inches)
3 6 7
M8 x 1
G1/2; 14
G1/2; 14
Ø34 (1.34); 4
(1.34); 4
Ø34
H1
H4
H2
X Y
H3
2 (0.079) 2 (0.079)
8 2
4
L3
F3 F4
L3
X B
T Y
D1
A
L4
F2 P F1
1 M8 x 1
27 (1.06)
Control cover for mounting a directional spool or poppet valve: Type ..WEMA…, ..WEMB… –
nominal dimensions in mm (inches)
Sizes 16 to 50 1 2 3 4 12 13 15 17
LFA – 7X /
12 = SAE threaded external connections
and UNC mounting bolts
Nozzle in channel –= Metric threaded connections
Size Type (Ø in 1/10 mm[0.004 in.])
No code = NBR seals
16 25 32 40 50 P T F V= FKM seals
x x x x x WEMA P** T** F** (Other seals on enquiry)
x x x x x WEMB P** T** F** Caution!
Nozzle possible; indicate, if required Observe compatibility of seals with
hydraulic fluid used!
For ordering codes for nozzles, see page 14 and 15.
M-3SED 6 UK../350…
M-3SEW 6 C../420… M-3SED 6 CK../350…
M-3SEW 6 U../420…
A A A
P T P T P T
A B A B
P T P T
X Z1 Z2 Y X Z1 Z2 Y
B B
A A
A B A B
P T P T
X Z1 Z2 Y X Z1 Z2 Y
B B
A A
RA 21010/03.05 | LC; LFA Industrial Hydraulics | Bosch Rexroth Corp. 35/68
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Control cover for mounting a directional spool or poppet valve: Type ..WEMA…, ..WEMB… –
nominal dimensions in mm (inches)
Sizes 16 to 50
4 7 5 8
6
D1; 14 (0.55)
14 (0.55)
D1;
B A
H1
X
H4
H2
H2
Y
1 Nameplate for sizes 16, 25, 32
H3
4 (0.16)
3 Ports X, Y, Z1 and Z2 optionally
4 (0.16)
3 as threaded connection for sizes
1 9 40 and 50
L2 4 Valve fixing screws are included in
L6 the control cover‘s scope of supply
2 (0.079)
X B A Y
F2 T F1
L6
L4
L3
4 (0.16)
G1/2; 14
(SAE-8; 3/4-16; 0.55)
L3
L5
Size 16 25 32 40 50
2
D1 — — — G1/2 G1/2
H1 65 (2.56) 40 (1.58) 50 (1.97) 60 (2.36) 68 (2.68)
H2 — — — 30 (1.18) 32 (1.26)
H3 15 (0.59) 24 (0.95) 28 (1.10) 32 (1.26) 34 (1.34)
H4 — — — 30 (1.18) 32 (1.26)
L1 65 (2.56) 85 (3.35) 100 (3.94) 125 (4.90) 140 (5.51)
L2 80 (3.15) 85 (3.35) 100 (3.94) 125 (4.90) 140 (5.51)
L3 — — — 53 (2.09) 60 (2.36)
L4 17 (0.67) 27 (1.06) 34.5 (1.36) 47 (1.85) 54.5 (2.15)
L5 47.5 (1.87) 64 (2.52) 71.5 (2.81) 84 (3.31) 91.5 (3.60)
L6 — — — 72 (2.83) 80 (3.15)
36/68 Bosch Rexroth Corp. | Industrial Hydraulics LC; LFA | RA 21010/03.05
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Control cover for mounting a directional spool or poppet valve: Type ..WEMA…, ..WEMB… –
nominal dimensions in mm (inches)
Size 63 1 2 3 4 12 13 15 17
LFA – 7X /
12 = SAE threaded external connections
and UNC mounting bolts
–= Metric threaded connections
Nozzle in channel
Type (Ø in 1/10 mm [0.004 in.]) No code = NBR seals
P T F V= FKM seals
WEMA P** T** F** (Other seals on enquiry)
WEMB P** T** F** Caution!
Observe compatibility of seals with
Nozzle possible; indicate, if required hydraulic fluid used!
For ordering codes for nozzles, see page 14 and 15.
M-3SED 10 UK../350…
M-3SEW 10 C../420… M-3SED 10 CK../350…
M-3SEW 10 U../420…
A A A
P T P T P T
A B A B
P T P T
X Z1 Z2 Y X Z1 Z2 Y
B B
A A
RA 21010/03.05 | LC; LFA Industrial Hydraulics | Bosch Rexroth Corp. 37/68
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Control cover for mounting a directional spool or poppet valve: Type ..WEMA…, ..WEMB… –
nominal dimensions in mm (inches)
Size 63
3 6 4 7
5
(SAE-8; 1-1/16-12; 0.55)
G1/2; 14
B A
82 (3.23)
X
(1.38)
(1.58)
60
Y
35
40
G1/2; 14
(1.97)
50
4 (0.16)
2
4 (0.16)
2 180 (7.09) 8
100 (3.94)
4 (0.16)
G1/2; 14
(SAE-8; 1-1/16-12; 0.55)
M8 x 1
F3 F4
180 (7.09)
X T Y
B A
101 (3.98)
P
F2 F1
78 (3.07)
67 (2.64)
4 (0.16)
G1/2; 14
(SAE-8; 1-1/16-12; 0.55)
78 (3.07) 1 Nameplate
117 (4.61) 2 Ports X, Y, Z1 and Z2 optionally as threaded connection
1
3 Valve fixing screws are included in the control cover‘s
scope of supply
4 Plug screw M8 x 1 for type ..WEMB…
5 Plug screw M8 x 1 for type ..WEMA….
6 Directional spool valve type 4WE 10 D…
7 Directional poppet valve type M-3SEW 10 …
8 Position of ports to ISO 4401-05-04-0-94
38/68 Bosch Rexroth Corp. | Industrial Hydraulics LC; LFA | RA 21010/03.05
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Control cover for mounting a directional spool or poppet valve: Type ..WEA8…, ..WEB8… – nominal
dimensions in mm (inches)
LFA – 6X /
12 = SAE threaded external connections
and UNC mounting bolts
–= Metric threaded connections
Nozzle in channel
Size Type (Ø in 1/10 mm [0.004 in.]) No code = NBR seals
80 100 P T F V= FKM seals
x x WEA8 P** T** F** (Other seals on enquiry)
x x WEB8 P** T** F** Caution!
Observe compatibility of seals with
Nozzle possible; indicate, if required hydraulic fluid used!
For ordering codes for nozzles, see page 14 and 15.
M-3SED 10 UK../350…
M-3SEW 10 C../420… M-3SED 10 CK../350…
M-3SEW 10 U../420…
A A A
P T P T P T
A B A B
P T P T
X Z1 Z2 Y X Z1 Z2 Y
B B
A A
RA 21010/03.05 | LC; LFA Industrial Hydraulics | Bosch Rexroth Corp. 39/68
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Control cover for mounting a directional spool or poppet valve: Type ..WEA8…, ..WEB8… –
nominal dimensions in mm (inches)
2 3 6 7
(SAE-8; 1-1/16-12; 0.55)
G1/2; 14
Ø34 (1.34); 4
Ø34 (1.34); 4
H1
H2
H2
H4
X Y
H3
2 (0.079) 2 (0.079)
L4 2
Z2
4
F3 F4
L3
L3
X T
B
D1
A Y
L5
F2 P F1
8
M8 x 1
1 Z1
L4
L6
Sizes 16 to 50 1 2 3 4 10 11 12 13 17
LFA WECA – 7X /
12 = SAE threaded external connections
and UNC mounting bolts
–= Metric threaded connections
Nozzle in channel
Size (Ø in 1/10 mm [0.004 in.]) No code = NBR seals
16 25 32 40 50 A B P T V= FKM seals
x x x x x A** B** P** T** (Other seals on enquiry)
Caution!
Nozzle possible; indicate, if required
Observe compatibility of seals with
For ordering codes for nozzles, see page 14 and 15. hydraulic fluid used!
A B A B
P T P T
X Z1 Z2 Y X Z1 Y
B B
A A
LFA . WECA…
sizes 40 and 50
(with directional spool valve type 3WE 6 A…)
A B
P T
X Z1 Y
A
RA 21010/03.05 | LC; LFA Industrial Hydraulics | Bosch Rexroth Corp. 41/68
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Sizes 16 to 50
4 5
Size 16 25 32 40 50
G1/2 G1/2
D1 — — — (SAE-8; (SAE-8;
M6 3/4-16) 3/4-16)
D1; 14 (0.55)
40 40 50 60 68
H1
(1.58) (1.58) (1.97) (2.36) (2.68)
30 32
B A H2 — — —
(1.18) (1.26)
H1
15 24 28 32 34
H3
(0.59) (0.95) (1.10) (1.26) (1.34)
H4
H2
X Y H2
D1; 14 (0.55)
30 32
H4 — — —
(1.18) (1.26)
H3
L7 G1/2; 14
17 27 34.5 47 54.5
(SAE-8; 3/4-16; 0.55) L4
(0.28) (1.06) (1.36) (1.85) (2.15)
4 (0.16)
B A Y L7 — — —
(2.83) (3.15)
X F2 T F1
L6
L3
L4
L5
6 2
Size 63 1 2 3 4 10 11 12 13 17
LFA 63 WECA – 7X /
3 4 LFA 63 WECA…
M8 x 1 (with directional spool valve type 3WE 10 A…)
(SAE-8; 1-1/16-12; 0.55)
A B
G1/2; 14
B A
(SAE-8; 1-1/16-12; 0.55)
50 82 (3.23)
(1.97) 40 (1.58)
P T
(2.36)
(1.58)
X
60
Y
40
Z1
X Y
4 (0.16) 2 4 (0.16) X Z1 Y
2 180 (7.09) B
4 (0.16)
100 (3.94)
G1/2; 14 A
(SAE-8; 1-1/16-12; 0.55)
M8 x 1
Z1
180 (7.09)
F3 F4
T
X Y
101 (3.98)
B A
90 (3.54)
F2 P F1
(2.70)
68.5
117 (4.61)
5 1
1 Nameplate
2 Ports X, Y and Z1 optionally as threaded connection
3 Valve fixing screws are included in the control cover‘s
scope of supply
4 Directional spool valve type 3WE 6 A…
5 Position of ports to ISO 4401-05-04-0-94
RA 21010/03.05 | LC; LFA Industrial Hydraulics | Bosch Rexroth Corp. 43/68
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
LFA WEA9 – 6X /
12 = SAE threaded external connections
and UNC mounting bolts
–= Metric threaded connections
Size Nozzle in channel
(Ø in 1/10 mm [0.004 in.]) No code = NBR seals
80 100 A B P T V= FKM seals
x x A** B** P** T** (Other seals on enquiry)
Caution!
Nozzle possible; indicate, if required
Observe compatibility of seals with
For ordering codes for nozzles, see page 14 and 15. hydraulic fluid used!
LFA . WEA9…
sizes 80 and 100
(with directional spool valve type 3WE 10 A…)
A B
3 4
P T
(SAE-8; 3/4-16; 0.55)
M8 x 1
B** A** P** T**
G1/2; 14
G1/2; 14
Ø34 (1.34); 4
Z1
Ø34 (1.34); 4
X Y
H1
X Z1 Y
H2
H2
H4
X Y B
H3
A
2 (0. 079) L4 2 (0.079)
2
Z1 Size 80 100
D1 250 (9.84) 300 (11.80)
H1 80 (3.15) 100 (3.94)
H2 30 (1.18) 40 (1.58)
L3
L2
L5
F3 F4
H3 45 (1.77) 52.5 (2.07)
X T Y
D1
B A H4 30 (1.18) 70 (2.76)
F2 P F1 L2 0 6 (0.24)
1 L3 6 (0.24) 6 (0.24)
L4 6 (0.24) 6 (0.24)
M8 x 1 L5 23 (0.91) 19 (0.75)
L6 27 (1.06) 26 (1.02)
5 L6
1 Nameplate
2 Ports X, Y, Z1 and Z2 optionally as threaded connection
3 Valve fixing screws included in the control cover‘s scope
of supply
4 Directional spool valve type 3WE 10 A…
5 Position of ports to ISO 4401-05-04-0-94
44/68 Bosch Rexroth Corp. | Industrial Hydraulics LC; LFA | RA 21010/03.05
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Control cover for mounting a directional spool valve: Type ..GWA…, ..GWB… –
nominal dimensions in mm (inches)
Sizes 16 to 50 1 2 3 4 10 11 12 13 17
LFA – 7X /
A A A
P T P T P T
A B A B
P T P T
P** A** T** P** B** T**
X Z1 Y X Z1 Y
B B
A A
A B A B
P T P T
P** A** T** P** B** T**
Y Y
Z1 Z1
X Z1 Y X Z1 Y
B B
A A
RA 21010/03.05 | LC; LFA Industrial Hydraulics | Bosch Rexroth Corp. 45/68
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Control cover for mounting a directional spool valve: Type ..GWA…, ..GWB… –
nominal dimensions in mm (inches)
Sizes 16 to 50
4 6 5 8 7 9
D1; 14
A
(0.55)
B
H1
Size 16 25 32 40 50
H4
Y H2
X
G1/2 G1/2
D1 — — — (SAE-8; (SAE-8;
H3
3/4-16) 3/4-16)
40 40 50 60 68
4 (0.16) 4 (0.16) H1
3 (1.58) (1.58) (1.97) (2.36) (2.68)
30 32
H2 — — —
L2 (1.18) (1.26)
2 (0.079)
L5 15 24 28 32 34
H3
4 (0.16)
53 60
X L4 — — —
(2.09) (2.36)
F2 T F1 62.5 70
L5 — — —
L3
(2.46) (2.76)
L4
L6
(1.87) (2.52) (2.81) (3.31) (3.60)
17 27 34.5 47 54.5
L7
(0.67) (1.06) (1.36) (1.85) (2.15)
L6
10 2
Control cover for mounting a directional spool or poppet valve: Type ..GWA…, ..GWB… –
nominal dimensions in mm (inches)
Size 63 1 2 3 4 10 11 12 13 17
LFA 63 – 7X /
12 = SAE threaded external connections
and UNC mounting bolts
–= Metricthreaded connections
Nozzle in channel
Type (Ø in 1/10 mm [0.004 in.]) No code = NBR seals
A B P T V= FKM seals
GWA A** P** T** (Other seals on enquiry)
GWB B** P** T** Caution!
Observe compatibility of seals with
Nozzle possible; indicate, if required hydraulic fluid used!
For ordering codes for nozzles,
see page 14 and 15.
M-3SED 10 UK../350…
M-3SEW 10 C../420… M-3SED 10 CK../350…
M-3SEW 10 U../420…
A A A
P T P T P T
A B A B
P T P T
P** A** T** P** B** T**
Y Y
Z1 Z1
X Z1 Y X Z1 Y
B B
A A
RA 21010/03.05 | LC; LFA Industrial Hydraulics | Bosch Rexroth Corp. 47/68
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Control cover for mounting a directional spool or poppet valve: Type ..GWA…, ..GWB…
(nominal dimensions in mm)
Size 63
5 3 7 4 8
B A
82 (3.23)
X
Y
(1.58)
G1/2; 14
40
50 (1.97)
4 (0.16) 4 (0.16)
6 2
2 180 (7.09)
78 (3.07)
4 (0.16)
G1/2; 14
(SAE-8; 3/4-16; 0.55)
M8 x 1
Z1
F3 F4
180 (7.09)
X T Y
B A
101 (3.98)
P
90 (3.54)
F2 F1
69.5 (2.74)
84 (3.31)
1 9 1 Nameplate
2 Ports Y and Z1 optionally as threaded connection
3 Valve fixing screws are included in the control cover‘s
scope of supply
4 Plug screw M8 x 1 for type ..GWB…
5 Plug screw M8 x 1 for type ..GWA….
6 Shuttle valve
7 Directional spool valve type 4WE 10 D…
8 Directional poppet valve type M-3SEW 10 …
9 Position of ports to ISO 4401-05-04-0-94
48/68 Bosch Rexroth Corp. | Industrial Hydraulics LC; LFA | RA 21010/03.05
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Control cover for mounting a directional spool or poppet valve: Type ..GWA…, ..GWB… –
nominal dimensions in mm (inches)
LFA – 6X /
12 = SAE threaded external connections
and UNC mounting bolts
–= Metric threaded connections
Nozzle in channel
Size Type (Ø in 1/10 mm [0.004 in.]) No code = NBR seals
80 100 A B P T V= FKM seals
x x GWA A** P** T** (Other seals on enquiry)
x x GWB B** P** T** Caution!
Observe compatibility of seals with
Nozzle possible; indicate, if required hydraulic fluid used!
For ordering codes for nozzles, see page 14 and 15.
M-3SED 10 UK../350…
M-3SEW 10 C../420… M-3SED 10 CK../350…
M-3SEW 10 U../420…
A A A
P T P T P T
A B A B
P T P T
X Y X Y
X Z1 Y X Z1 Y
B B
A A
RA 21010/03.05 | LC; LFA Industrial Hydraulics | Bosch Rexroth Corp. 49/68
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Control cover for mounting a directional spool or poppet valve: Type ..GWA…, ..GWB… –
nominal dimensions in mm (inches)
6 5 3 8 4 9
(SAE-8; 1-1/16-12; 0.55)
G1/2; 14
Ø34 (1.34); 4
Ø34 (1.34); 4
H1
X
H2
H4
Y
H3
2 (0.079) 2 (0.079)
7 G1/4 2 10
(SAE-4; 7/16-20)
Z1
M
L1
F3 F4
L5
X T
D1
B A Y
L4
P
L3
F2 F1
1
M8 x 1
27 (1.06)
Control cover for mounting a directional spool or poppet valve: Type ..KWA…, ..KWB… –
nominal dimensions in mm (inches)
Sizes 16 to 50 1 2 3 4 10 11 12 14 17
LFA – 7X /
A A A A B A B
P T P T P T P T P T
X Z1 Y X Z1 Y X Z1 Y
B B B
A A A
X Z1 Y X Z1 Y X Z1 Y
B B B
A A A
RA 21010/03.05 | LC; LFA Industrial Hydraulics | Bosch Rexroth Corp. 51/68
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Control cover for mounting a directional spool or poppet valve: Type ..KWA…, ..KWB… –
nominal dimensions in mm (inches)
Sizes 16 to 50
7 4 M6 9
B A
D1; 14
10
H1
H5 Y
H4
X
H2
H3
8
4 (0.16) 4 (0.16) 3
2 (0.079)
L2 1
L7
D1; 14 4 (0.16)
Z1 5
M6
F4
F3
P
L1
B A
X Y
F2 F1
T
L3
L4
L5
L6
6 2 11
Size 16 25 32 40 50
D1 — — — G1/2 G1/2
1 Nameplate for sizes 16, 25 and 32 (SAE-8; (SAE-8;
2 Nameplate for sizes 40 and 50 3/4-16) 3/4-16)
3 Ports Y and Z1 optionally as threaded H1 40 (1.57) 40 (1.57) 50 (1.97) 60 (2.36) 68 (2.68)
connection for sizes 40 and 50 H2 17 (0.67) 17 (0.67) 21.5 (0.85) 30 (1.18) 32 (1.26)
4 Valve fixing screws are included in the H3 15 (0.59) 24 (0.95) 28 (1.10) 32 (1.26) 34 (1.34)
control cover‘s scope of supply
H4 — — — 30 (1.18) 32 (1.26)
5 Plug screw ..KWB…
H5 — — — 30 (1.18) 50 (1.97)
6 Plug screw ..KWA…
L1 65 (2.56) 85 (3.35) 100 (3.94) 125 (4.92) 140 (5.51)
7 Shuttle valve
L2 80 (3.15) 85 (3.35) 100 (3.94) 125 (4.92) 140 (5.51)
8 M6 for sizes 16 and 40, M8 x 1 for size 50
L3 36.5 (1.44) 45.5 (1.79) 50 (1.97) 62.5 (2.46) 72 (2.83)
9 Directional spool valve type 4WE 6 D…
L4 — — — 53 (2.09) 60 (2.36)
10 Directional poppet valve type M-3SEW 6 …
L5 17 (0.67) 27 (1.06) 34.5 (1.36) 47 (1.85) 54.5 (2.15)
11 Position of ports to ISO 4401-03-02-0-94
L6 47.5 (1.87) 64 (2.52) 71.5 (2.81) 84 (3.31) 91.5 (3.60)
L7 — — — 62.5 (2.46) 70 (2.76)
52/68 Bosch Rexroth Corp. | Industrial Hydraulics LC; LFA | RA 21010/03.05
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Control cover for mounting a directional spool or poppet valve: Type ..KWA…, ..KWB… –
nominal dimensions in mm (inches)
Size 63 1 2 3 4 10 11 12 14 17
LFA 63 – 7X /
M-3SED 10 UK../350…
M-3SEW 10 C../420… M-3SED 10 CK../350…
M-3SEW 10 U../420…
A A A
P T P T P T
A B A B
P T P T
X Z1 Y X Z1 Y
B B
A A
RA 21010/03.05 | LC; LFA Industrial Hydraulics | Bosch Rexroth Corp. 53/68
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Control cover for mounting a directional spool or poppet valve: Type ..KWA…, ..KWB… –
nominal dimensions in mm (inches)
Size 63
5 3 7 4 8
B A
82 (3.23)
(1.06)
Y
(1.10)
42
27
28
G1/2; 14
50 (1.97)
4 (0.16) 6 2 4 (0.16)
2 180 (7.09)
90 (3.54)
4 (0.16)
G1/2; 14
(SAE-8; 3/4-16; 0.55)
M8 x 1
Z1
F3 F4
180 (7.09)
X T
Y
B A
P
101 (3.98)
90 (3.54)
F2 F1
69 (2.72)
Control cover for mounting a directional spool or poppet valve: Type ..KWA…, ..KWB… –
nominal dimensions in mm (inches)
LFA – 6X /
12 = SAE threaded external connections
and UNC mounting bolts
–= Metric threaded connections
Size Nozzle in channel
Type (Ø in 1/10 mm [0.004 in.]) No code = NBR seals
80 100 A B P T X V= FKM seals
x x KWA A** P25 T** X20 (Other seals on enquiry)
x x KWB B** P25 T** X20 Caution!
Observe compatibility of seals with
Standard nozzle – is not shown in the type designation hydraulic fluid used!
Nozzle possible; indicate, if required
For ordering codes for nozzles, see page 14 and 15.
M-3SED 10 UK../350…
M-3SEW 10 C../420… M-3SED 10 CK../350…
M-3SEW 10 U../420…
A A A
P T P T P T
A B A B
P T P T
X20 M X20 M
X Z1 Y X Z1 Y
B B
A A
RA 21010/03.05 | LC; LFA Industrial Hydraulics | Bosch Rexroth Corp. 55/68
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Control cover for mounting a directional spool or poppet valve: Type ..KWA…, ..KWB… –
nominal dimensions in mm (inches)
G1/2; 14 G3/8
B A
G1/2; 14
Ø34 (1.34); 4
Ø34 (1.34); 4
H1
H5
H4
H2
X Y
H3
2
2 (0.079) G1/2; 14 2 (0.079)
(SAE-8; 3/4-16; 0.55)
2
L6
M8 x 1
Ø34 (1.34); 4 4
9
Z1
M
31 (1.22)
F3 F4
L3
X T Y
B
D1
A
F2 P F1
6
M8 x 1
M8 x 1
5
27 (1.06)
1
L1
Control cover with electrical monitor of the closed position: Type ..E… (monitoring of the closed
position)– nominal dimensions in mm (inches)
Technical data and notes are valid for all listed control covers Position switch
with electrical monitor (E, EH2, EWA and EWB). For connection, functions, pin assignment, see page 66.
The contact-free position switch with integrated amplifier
switches after having reached the switching position. This posi- Caution!
tion switch offers the following advantages: Outputs of the position switch protected only from load
short-circuit.
– No dynamic seals Prevent short-circuit of the outputs against +24 V.
– Direct monitoring of the closed position of the valve
– Long service life
– Control cover and cartridge valve included completely in
this type
– pmax = 400 bar (5800 PSI)
Sizes 16 to 63
1 2 3 4 5 6 7 8 9 14 17
LFA E – 7X / D QMG24 F
No code = NBR seals
Size Area ratio A1: Cracking Nozzle in channel V= FKM seals
A2 pressure pÖ (Ø in 1/10 mm (Other seals on enquiry)
16 25 32 40 50 63
[0.004 in.]) Caution!
CA = 2:1 1) 10 = 1.0 bar
x x x x x x Observe compatibility of seals with
(0.039 PSI) X**
CB = 14.3:1 2) hydraulic fluid used!
20 = 2.0 bar
(0.079 PSI) Nozzle possible; indicate, if required
40 = 4.0 bar
(0.157 PSI) QM = Inductive position switch, see page 66
G24 = 24 V DC voltage
LFA . E…
sizes 16 to 63
X X**
A
RA 21010/03.05 | LC; LFA Industrial Hydraulics | Bosch Rexroth Corp. 57/68
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Control cover with electrical monitor of the closed position: Type ..E… (monitoring of the closed
position) – nominal dimensions in mm (inches)
Sizes 16 to 63
48 (1.89)
10 (0.39)
5 4 Size 16 25 32 40 50 63
H4
H1
(1.97) (1.97) (2.76) (4.33) (4.72) (5.91)
6
12 16 16 83 93 113
H2
D2 (0.47) (0.63) (0.63) (3.27) (3.66) (4.45)
15 24 28 32 34 50
H3
(0.59) (0.95) (1.10) (1.26) (1.34) (1.97)
X** 1
78 78 78 98 98 98
H4
H1
L1
1 Nameplate
2 Port X optionally as threaded connection
3 Position switch type QM (included in the type, see page 66)
4 Cable socket Z24 (separate order, see page 66)
5 Space required to remove cable socket
6 Protective cap
58/68 Bosch Rexroth Corp. | Industrial Hydraulics LC; LFA | RA 21010/03.05
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Control cover with electrical monitor of the closed position and stroke limiter: Type ..EH2…
(monitoring of the closed position) – nominal dimensions in mm (inches)
Sizes 16 to 40
1 2 3 4 5 6 7 8 9 14 17
X X**
X X**
X X
B B
A A
RA 21010/03.05 | LC; LFA Industrial Hydraulics | Bosch Rexroth Corp. 59/68
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Control cover with electrical monitor of the closed position and stroke limiter: Type ..EH2…
(monitoring of the closed position) – nominal dimensions in mm (inches)
Sizes 16 to 32
SW1
D1; T1
SW2 7 3 4
X** M6
H1
H5
H6
H2
H4
X
Size 16 25 32 40
H3
35 40 50 182
2 1 5 H1
(1.38) (1.58) (1.97) (7.17)
80 (3.15)
78 (2.95) 50 50 50
H2 —
(1.97) (1.97) (1.97)
15 24 28 32
H3
48 (1.89)
25 25 25 25
H4
(0.98) (0.98) (0.98) (0.98)
L2
M8 x 1
X** A/F2
21 21 27 46
H1
3)
Maximum dimension
H4
X
H3
4 (0.16)
78 (3.07) 1 Nameplate
2 Port X optionally as threaded connection
3 Position switch type QM
(included in type, see page 66)
48 (1.89)
Control cover with electrical monitor of the closed position for mounting a directional spool or
poppet valve: Type ..EWA…, ..EWB… (monitoring of the closed position) – dimensions in mm (inches)
Sizes 16 to 32
1 2 3 4 5 6 7 8 10 11 12 13 17
LFA – 7X / D QMG24
No code = NBR seals
Size Area ratio A1: Cracking Nozzle in channel V= FKM seals
A2 pressure pÖ (Ø in 1/10 mm [0.004 in.]) (Other seals on enquiry)
16 25 32 Type
Caution!
CA = 2:1 1) 10 = 1.0 bar A B P T
x x x EWA
(0.039 PSI) Observe compatibility of seals with
CB = 14.3:1 2) A** P** T**
x x x EWB hydraulic fluid used!
20 = 2.0 bar
B** P** T**
(0.079 PSI)
40 = 4.0 bar Nozzle possible; indicate, if required
(0.157 PSI)
QM = Inductive position switch, see page 66
G24 = 24 V DC voltage
M-3SED 6 UK../350…
M-3SEW 6 C../420… M-3SED 6 CK../350…
M-3SEW 6 U../420…
A A A
P T P T P T
A B A B
P T P T
P** T** A** P** T** B**
X Y X Y
B B
A A
RA 21010/03.05 | LC; LFA Industrial Hydraulics | Bosch Rexroth Corp. 61/68
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Control cover with electrical monitor of the closed position for mounting a directional spool or
poppet valve: Type ..EWA…, ..EWB… (monitoring of the closed position): dimensions in mm (inches)
Sizes 16 to 32
2 8 9
M6
4
B A
M6
H1
3 5 6
X Y
H2
H4
H3
11
2 (0.079)
M6
L2 1 10 7
F3
P
48 (1.89)
F4
X B A Y
L1
T Size 16 25 32
F2 F1
40 40 50
L4
H1
(1.58) (1.58) (1.97)
50 50 50
H2
(1.97) (1.97) (1.97)
L3 M6 78 (3.07)
15 24 28
H3
(0.59) (0.95) (1.10)
1 Nameplate 6 Cable socket Z24 (separate order, 25 25 25
H4
2 Valve fixing screws are included see page 66) (0.98) (0.98) (0.98)
in the control cover‘s scope of 7 Space required to remove cable 65 85 100
supply socket L1
(2.56) (3.35) (3.94)
3 Plug screw M6 for 8 Directional spool valve 80 85 100
type ..EWB... type 4WE 6 D… L2
(3.15) (3.35) (3.94)
4 Plug screw M6 for 9 Directional poppet valve
type ..EWA... type M-3SEW 6 … 47.5 64 71.5
L3
(1.87) (2.52) (2.81)
5 Position switch type QM (included 10 Protective cap
in type, see page 66) 11 Position of ports to 17.25 27.25 34.75
L4
ISO 4401-03-02-0-94 (0.68) (1.08) (1.37)
62/68 Bosch Rexroth Corp. | Industrial Hydraulics LC; LFA | RA 21010/03.05
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Control cover with electrical monitor of the closed position for mounting a directional spool or
poppet valve: Type ..EWA…, ..EWB… (monitoring of the closed position) – dimensions in mm (inches)
Sizes 40 and 50
1 2 3 4 5 6 7 8 10 11 12 13 17
LFA – 7X / D QMG24
No code = NBR seals
Size Area ratio A1: Cracking Nozzle in channel V= FKM seals
Type A2 pressure pÖ (Ø in 1/10 mm [0.004 in.]) (Other seals on enquiry)
40 50
CA = 2:1 1) 10 = 1.0 bar A B P T Caution!
x x EWA Observe compatibility of seals with
(0.039 PSI)
CB = 14.3:1 2) A** P** T** hydraulic fluid used!
x x EWB
20 = 2.0 bar
B** P** T**
(0.079 PSI)
40 = 4.0 bar Nozzle possible; indicate, if required
(0.157 PSI)
QM = Inductive position switch, see page 66
G24 = 24 V DC voltage
M-3SED 6 UK../350…
M-3SEW 6 C../420…
M-3SEW 6 U../420…
A A
P T P T
A B A B
P T P T
P** T** A** P** T** B**
X Y X Y
X Y X Y
B B
A A
RA 21010/03.05 | LC; LFA Industrial Hydraulics | Bosch Rexroth Corp. 63/68
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Control cover with electrical monitor of the closed position for mounting a directional spool or
poppet valve: Type ..EWA…, ..EWB… (monitoring of the closed position) – dimensions in mm (inches)
Sizes 40 and 50
10 (0.39)
8 7 6
11
123 (4.84)
98 (3.86)
9
M6
4
A M6
X 5
H1
B
H4
H2
X Y
H3
3
2 10
3 (0.12)
(1
48 9)
.8
L1
X
Y
L4
L2
4 (0.16)
L3
2 1
1 Nameplate Size 40 50
2 Ports X and Y optionally as threaded connection G1/4 H1 110 (4.33) 120 (4.72)
3 Valve fixing screws are included in the control cover‘s
scope of supply H2 58.5 (2.30) 68 (2.68)
4 Plug screw M6 for ..EWB... H3 32 (1.26) 34 (1.34)
5 Plug screw M6 for ..EWA... H4 77.5 (3.06) 87 (3.43)
6 Position switch type QM (included in type, see page 66) L1 125 (4.92) 140 (5.51)
7 Cable socket Z24 (separate order, see page 66)
L2 62.5 (2.46) 70 (2.76)
8 Space required to remove cable socket
L3 98.5 (3.88) 113 (4.45)
9 Directional spool valve type 4WE 6 D…
10 Directional poppet valve type M-3SEW 6 … L4 66.5 (2.62) 70 (2.76)
11 Protective cap
64/68 Bosch Rexroth Corp. | Industrial Hydraulics LC; LFA | RA 21010/03.05
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Control cover with electrical monitor of the closed position for mounting a directional spool or
poppet valve: Type ..EWA…, ..EWB… (monitoring of the closed position) – dimension in mm (inches)
Size 63
1 2 3 4 5 6 7 8 10 11 12 13 17
LFA – 7X / D QMG24
No code = NBR seals
Type Area ratio A1: Cracking Nozzle in channel V= FKM seals
A2 pressure pÖ (Ø in 1/10 mm [0.004 in.]) (Other seals on enquiry)
EWA
CA = 2:1 1) 10 = 1.0 bar A B P T Caution!
EWB
(0.039 PSI) Observe compatibility of seals with
CB = 14.3:1 2) A** P** T**
20 = 2.0 bar hydraulic fluid used!
B** P** T**
(0.079 PSI)
40 = 4.0 bar Nozzle possible; indicate, if required
(0.157 PSI)
QM = Inductive position switch, see page 66
G24 = 24 V DC voltage
M-3SED 10 UK../350…
M-3SEW 10 C../420…
M-3SEW 10 U../420…
A A
P T P T
A B A B
P T P T
P** T** A** P** T** B**
X Y X Y
X Y X Y
B B
A A
RA 21010/03.05 | LC; LFA Industrial Hydraulics | Bosch Rexroth Corp. 65/68
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Control cover with electrical monitor of the closed position for mounting a directional spool or
poppet valve: Type ..EWA…, ..EWB… (monitoring of the closed position): dimensions in mm (inches)
Size 63
8 7 6
10 (0.39)
11
123 (4.84)
98 (3.86)
9
M8 x 1
4
150 (5.91)
A M8 x 1
105 (4.13)
X 5
B
(3.07)
78
X Y
50 (1.97)
3 (0.12) 90 2 3 10
4 (0.16)
(3.54)
180 (7.09)
X
Y
(3.54)
90
150 (5.91)
48 9)
(1
1 1 Nameplate
.8
Load up to
Operating voltage 24 V DC voltage + 20 %
– 10 % 400 mA
(Residual ripple content < 10%)
Current consumption: Maximum 40 mA
Load-carrying capacity 400 mA (output to PNP 24 V =) N.O. N.C.
of outputs :
1 4 2 3
Temperature range: –20° C to +80° C (–4 to +176 °C)
Pin assignment: 1: +24V PNP
4 3 2: Normally-closed
(low-resistance—high-resistance) Inductive position switch type QM can be a
normally-closed or normally-open contact.
3: 0 V
1 2 4: Normally-open
(high-resistance—low-resistance) Caution!
Plug-in contacts on
position switch The position switch is not provided with a protective conduc-
tor connection!
Cable socket for inductive position switch type QM, separate order – nominal dimensions in mm (in.)
M12 x 1
Ø14.5
(0 57)
41.5 (1.63)
54 (2.13)
35 (1.35)
Notes
RA 21010/03.05 | LC; LFA
Industrial Hydraulics | Bosch Rexroth Corp. 67/68
68/68 Bosch Rexroth Corp. | Industrial Hydraulics LC; LFA | RA 21010/03.05
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
Bosch Rexroth Corp. © This document, as well as the data, specifications and other
Industrial Hydraulics information set forth in it, are the exclusive property of Bosch Rexroth
2315 City Line Road Corporation. Without their consent it may not be reproduced or given to
third parties.
Bethlehem, PA 18017-2131
USA The data specified above only serve to describe the product. No
Telephone (610) 684-8300 statements concerning a certain condition or suitability for a certain
application can be derived from our information. The information given
Facsimile (610) 694-8467
does not release the user from the obligation of own judgment and
www.boschrexroth-us.com
verification. It must be remembered that our products are subject to a
natural process of wear and aging.