Professional Documents
Culture Documents
Resources
Newspaper
Ink rollers – wet and dry
Inks
Inking block
Colour paper
Strips of scrap paper
Aprons
Polystyrene print block
Process
2. Wear apron and roll up sleeves– (health and safety- inform pupils
if get on clothes won’t come out)
3. Prepare ink on ink block – drag ink down and out ( don’t pull all
down at once)
4. Place scrap paper under poly block (always work in clean area)
5. Roller ink onto poly block with wet roller– make sure goes all the
way to the edges (will go onto scrap paper)
6. Make sure ink is even across block
7. Place block face down onto colour paper (do a test print first to see
quality of print)
8. Use dry roller to press block down. Roll all the way to the edges
10. Slowly peel off print and leave to dry – look to see if there is too
much or too little ink on your block
To clean boards – run under tap, dry with paper towels and stack
next to sink