Professional Documents
Culture Documents
Grundfosliterature 5173526
Grundfosliterature 5173526
UPS2
Circulator pumps
50/60 Hz
UPS2
1. Product introduction 3
Table of contents
Type key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Performance range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Applications 4
UPS replacement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Pumped liquids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Control of heating systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Advantages of pump control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3. Construction 6
Sectional drawing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Material specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Motor and control box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
7. Accessories 13
Insulating kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
ALPHA plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Union and valve kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
8. Product range 14
UPS2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
UPS2, United Kingdom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
UPS2, Ireland. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
UPS2, BU/RO/GR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2
UPS2
1
1. Product introduction
Product introduction
UPS2 is a complete range of circulator pumps with the Comfort
following features: Low-noise operation.
• integrated differential-pressure control enabling
Safety
adjustment of pump performance to the actual
system requirement Built-in electrical and thermal protection of the pump.
• motor based on permanent-magnet/compact-rotor User friendliness
technology. Simple setting and operation.
The pumps are energy-optimised and comply with the
requirements of the EuP directive.
The installation of UPS2 will reduce power
Type key
consumption considerably, reduce noise from
Example UPS2 15 - 40/50/60 130
thermostatic valves and similar fittings and improve the
control of the system. Pump range
The UPS2 range offers a host of advantages: Nominal diameter (DN) of inlet and outlet ports [mm]
(15 = 1"25 = 1 1/2", PH = pump head only)
Energy savings Maximum head [dm] of the UPS pump types that can be replaced
by the UPS2
High-efficient permanent-magnet motors.
Port-to-port length [mm]
Flexibility
* Exception: UK version, size 15 = 1 1/2".
Suitable for installation in existing systems.
Performance range
S +
>N3D@ >P@ 836
;;
;;
;;
TM05 6080 3614
4>PñK@
3
2 UPS2
2. Applications
Applications
5 II II
III II
I I
6 II II
III III
Fig. 3 Two-pipe heating system I I
8 II II
III III
Pumped liquids
The pump is suitable for clean, thin, non-aggressive
and non-explosive liquids, not containing solid
particles, fibres or mineral oil.
TM03 9890 4507
4
UPS2
2
Control of heating systems
Applications
H
The heating required in a building varies greatly during
the day due to changing outdoor temperatures, solar
radiation and heat emanating from human beings, A2 1
electric appliances, etc. ΔH2 A1
Add to this that the need for heating may vary from one
A3
section of the building to another and that the
A2 1
ΔH1 Q
A1
Fig. 7 Three proportional-pressure curves/settings
Constant-curve control
TM01 9119 5002
5
3 UPS2
3. Construction
Construction
UPS2 is designed for long and trouble-free operation Motor and control box
due to the canned-rotor type, i.e. pump and motor form
an integral unit without shaft seal and with only two The motor is a 4-pole synchronous permanent-magnet
gaskets for sealing. The bearings are lubricated by the motor.
pumped liquid. These constructions ensure The pump controller is incorporated in the control box,
maintenance-free operation. which is fitted to the stator housing with screws.
The pumps are characterised by the following:
Control panel
• Permanent-magnet/compact-stator motor
contributing to high efficiency and high starting
torque.
• Ceramic shaft and radial bearings contributing to
long life.
• Carbon thrust bearing contributing to long life
• Stainless-steel rotor can, bearing plate and rotor
cladding contributing to corrosion-free long life.
• Composite impeller contributing to corrosion-free
long life.
Sectional drawing
Fig. 10 Push-button position
Material specification
AISI/
Pos. Description Material EN
ASTM
Controller
1 Composite, PC
complete
Rotor can Stainless steel 1.4301 304
9
Radial bearing Ceramics
TM05 5381 1012
Shaft Ceramics
11
Rotor cladding Stainless steel 1.4301 304
Thrust bearing Carbon
12 Thrust bearing
EPDM rubber
retainer
Fig. 11 Possible control box positions
13 Bearing plate Stainless steel 1.4301 304
Composite, PP
16 Impeller
or PES
18 Pump housing Cast iron EN-JL 1020 A48-25
Gaskets EPDM rubber
6
UPS2
4
75 °C 90 °C 110 °C
0.5 m head 2.8 m head 10.8 m head
= III/ II / I
Liquid temperature
To avoid condensation in the control box and stator,
the liquid temperature must always be higher than the
c.) c.) c.)
ambient temperature. See table below. (5
se
(5
se
(5
se
TM06 9074 2617
III II I III II I
Liquid temperature
Ambient temperature
[°C] Minimum Maximum
[°C] [°C]
0 2 95
Fig. 13 Control modes
10 10 95
20 20 95
30 30 95
35 35 95
40 40 95
7
4 UPS2
HH
III II I
Q
Q
Fig. 14 Pump setting in relation to performance
8
UPS2
5
Curve conditions
The guidelines below apply to the performance curves
on the following pages:
• Test liquid: airless water.
• The curves apply to a density of ρ = 983.2 kg/m3
and a liquid temperature of 60 °C.
• All curves show average values and should not be
used as guarantee curves. If a specific minimum
performance is required, individual measurements
must be made.
• The curves for speeds I, II and III are marked.
• The curves apply to a kinematic viscosity of =
0.474 mm2/s (0.474 cSt).
• The conversion between head H [m] and pressure p
[kPa] has been made for water with a density of ρ =
1000 kg/m3. For liquids with other densities, for
example hot water, the outlet pressure is
proportional to the density.
The EEI values for UPS2 pumps are far below the EuP
2013 value and comply with the requirements for 2015.
See fig. 15.
Index
100
90
80
70
60
50
EEI = 0.27
EEI = 0.23
EEI = 0.23
40
30
20
TM05 7834 1613
10
0
EuP EuP UPS2
2013 2015
9
6
Performance curves and technical data
4
III II I
3
II III
1
I
0
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 Q [m³/h]
P1
[W]
50
I II III
III
40
II
30
I
20
0
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 Q [m³/h]
Speed P1 [W] I1/1 [A] Connections: See Insulating kits, page 13.
B3 H3 G
H4
230V ~ PC:1251
50/60 Hz GB
L1
B1 B2 H1 H2
10
6
4
III II I
3
II III
1
I
0
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 Q [m³/h]
P1
[W]
50
I II III
III
40
II
30
I
20
0
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 Q [m³/h]
Speed P1 [W] I1/1 [A] Connections: See Insulating kits, page 13.
B3 H3 G
H4
230V ~ PC:1251
50/60 Hz GB
L1
B1 B2 H1 H2
11
6
Performance curves and technical data
III
II
I
III
II
I
B3 B4
L1
L3
TM062103 3714
H1 H2
B5
L2
UPS2 25-80 0.23 180 22 141 95 50 64 27 112 1 1/2 2.7 2.9 0.005
UPS2 32-80 0.23 180 22 141 95 50 64 27 112 2 2.7 2.9 0.005
12
UPS2
7
7. Accessories
Accessories
Insulating kits Union and valve kits
UPS2 pumps can be fitted with two insulating shells. UPS2 pumps can be fitted with ALPHA compatible
The insulation thickness of the insulating shells unions, see the list below:
corresponds to the nominal diameter of the pump.
Product numbers, unions
The insulating kit, which is tailored to the individual
R
pump type, encloses the entire pump housing. The two Rp
insulating shells are easy to fit around the pump.
Connection
ALPHAx
3/4 1 1 1/4 1 1 1/4
15-xx* G1 ●
25-xx G 1 1/2 529921 529922 529821 529925 529924
32-xx G2 509921 509922
* When ordering for UK versions, use the product numbers for 25-xx
(G 1 1/2).
● Available on request.
Thread types
TM05 8315 2517
ALPHA plugs
1 2 3 Rc Rp R Rp
TM05 3073 0612
R R Rp Rc
3 96884669
cable
13
8 UPS2
8. Product range
Product range
Note: Click on the product number and go directly to the performance curve in Grundfos Product Center.
UPS2
Voltage
Port-to-port length Data sheet
Pump type Connection [V] Product number
[mm] Page
50/60 Hz
UPS2 15-40/60 130 G1 98243667
UPS2 25-40/60 130 G 1 1/2 98243668 10
UPS2 PH-40/60 - - 230 98334567
UPS2 25-80 180 G 1 1/2 98707853
12
UPS2 32-80 180 G2 98707855
UPS2, Ireland
Voltage
Port-to-port length Data sheet
Pump type Connection [V] Product number
[mm] Page
50/60 Hz
UPS2 25-50/60 130 G 1 1/2 230 98568293 11
UPS2, BU/RO/GR
Voltage
Port-to-port length Data sheet
Pump type Connection [V] Product number
[mm] Page
50/60 Hz
UPS2 25-40/60 180 G 1 1/2 230 98633963 10
14
UPS2
9
http://product-selection.grundfos.com
Subject to alterations.
15
ECM: 1212334
98505133 0817
GRUNDFOS A/S
www.grundfos.com
Telephone: +45 87 50 14 00
DK-8850 Bjerringbro . Denmark
The name Grundfos, the Grundfos logo, and be think innovate are registered trademarks owned by Grundfos Holding A/S or Grundfos A/S, Denmark. All rights reserved worldwide. © Copyright Grundfos Holding A/S