Professional Documents
Culture Documents
Homework Chap 1 Making Measurements
Homework Chap 1 Making Measurements
2) Diagram 5 shows different eye positions while taking a reading off a metre rule.
Which of the four eye positions is the correct one in order to prevent the occurrence of parallax
error?
A E B F C G D H
3) Diagram 7 shows different eye positions when reading the volume of a liquid in a measuring
cylinder.
4) Diagram 9 shows the set-up of the apparatus to determine the volume of a cork.
Diagram 9
Which of the following is the purpose of using the sinker?
A To raise the water level
B To immerse the cork in the water
C To measure the volume of the cork
D To ensure that the reading obtained is accurate
https://www.facebook.com/PlazPhysics/ 1
IGCSE Homework Making Measurements
5) Diagram 20 shows the water level in a measuring cylinder increasing when 6 identical marbles
are put into the cylinder.
Diagram 20
If the mass of a marble is 12 g, what is the density of a marble?
A 0.4 g/cm3 C 2.4 g/cm3
B 2.0 g/cm3 D 5.0 g/cm3
► ◄ Measure weight
► ◄ Measure time
► ◄ Measures diameter
https://www.facebook.com/PlazPhysics/ 2
IGCSE Homework Making Measurements
7) State the temperature, in °C, of the liquids in diagram below.
https://www.facebook.com/PlazPhysics/ 3
IGCSE Homework Making Measurements
9) Diagram below shows an experiment to determine the volume of a stone and a cork.
c) Table below shows the volume obtained for the different numbers of marbles by using the
above method.
Number of marbles Volume (cm3)
2 6
5 15
3
Calculate the volume, in cm , of 12 marbles.
b) A cork and a zinc block are put into a beaker of water in Diagram 4 below.
Draw the positions of the substances in the diagram above. Use ○ to represent the cork and
□ to represent the zinc block.
https://www.facebook.com/PlazPhysics/ 4