Professional Documents
Culture Documents
Add IC c ard
Operations on Modify the administrator passcode. Click "IC card" on the APP->“
Add IC card ”on the upper right corner ->
US E R MA NUAL
Click “generate passcode” -> Select generate passcode type -> Write a
TTlock app Select the lock on the APP ->Click settings -> Basics -> Click “Admin
name -> Generate passcode finished by APP itself, you can share this Enter the name and select the validity period → Click “OK” and then
swipe the card to add.
Specification passcode”-> Enter the new administrator password.
code to other family members.
E-Key
Click gateway -> Choose gateway type G2 -> Click next -> Add gateway
Send E-Key to families unlock by bluetooth The customized password must be operated near the lock. Finish the network information -> Click OK.
T1/T2
"settings" then enter "Basics" to get system admin Passcode
Mechanical Key or u can change it) Download Get the
E-key
Open the 1)It must be operated near the lock. Back to home page, click the little lock sign as ( It means that you
can unlock the door anywhere). Besides opening the locks remotely, the
APP door 2)Press the finger 4 times on the fingerprint collector
Open the door by the mechanical key for any situation according to the phone screen instruction and voice prompt. gateway also can generate passcode/ authorized admin/ check records.
1 2 3 4 5 6
*
Chinese voice: input " 39#administrator password#1# " on the lock. 1)Press your finger four times on the fingerprint collector
*
English voice: input " 39#administrator password#2# " on the lock. according to the voice prompt.
2)After success, you can continue to add other fingerprints / 6. Delete fingerprint 9. Delete admin
11. Delete pas s c ode Chinese *
passwords / IC cards, or you can press the “ ” key or wait for
Certificate of Quality
voice *39#administrator password#1# timeout to exit the add mode.
Input 70#administrator password# on the lock, all fingerprints are Press “clean” button 5 seconds, input “000#”, the admin deleted and
* in this operation
deleted locks recovery to factory status
Click "password " on the APP -> Click the password to be deleted -> click
“delete”.
English
voice *39#administrator password#2# 4
Input Delete Press “clean” button Input Delete the admin
& recovery to factory status
P roduct:
Open APP
Click
password
Select
password Delete * 70#administrator password# all fingerprint 5 seconds 000#
Model No.:
Administrator's initial password is 123456.
. Add pas s word 10. Warming T ips Date:
It must be operated near the lock. 7. Delete pas s word
Inspector:
Input 80# on the lock -> Enter administrator's password# -> Input new
* If the lock has added administrator already, APP cannot find the lock's
2. S et the adminis trator pas s word *
password needed to be added# -> Input the same password# again.
*
Enter 71#administrator password# on the lock, all unlocking passwords
are deleted in this operation.
signal
Open APP
Click Select
Input
*12#123456# admin password the same password
timeout to exit the add mode. *
passwords / IC cards, or you can press the key or wait for
Administrator password will not be deleted.
IC card IC card Delete
7 8 9 10 11 12