Professional Documents
Culture Documents
Features Applications
Large oil storage tanks
Ingress protection: Exd II CT6 Crude oil depot
Electrical Parameters
Measurement object Liguid level or Interface level Liquid level or Interface level
Linearity ≤±0.05%F.S(Minimum±50μm)
Repeatability ≤±0.002%F.S
Hysteresis ≤0.002%F.S
www.shinestates.com 01
Explosion-proof magnetostrictive liquid level sensor
Mechanical dimension
A Thread Spec.
M18X1.5
M20X1.5
BSP3/4 -16UNF
Interface floater A
Liquid level floater
Locking ring
( 58 )
8.0
12
20.0
8.0
φ
Wiring
Analog output
Digital output
Connector Pins description
Aviation connector Cable wiring ModBus Output
Pin1 red Power supply(+)
Pin2 white NC
Pin3 blue NC
1 7 6
Pin4 green RS485 Signal B
2 5
Pin5 brown RS485 Signal A
3 4
Pin6 bare wire Shielding wire
Pin7 black Power supply(-)
Note:
!
1. Sensor power supply requirement: + 24 V DC ±10%, to each sensor current input must be larger than 150 mA;
2. The shielded cable keep away from high power electrical equipment, high voltage cables and strong electromagnetic radiation place, etc.;
3. Cable shielding line must be kept in good condition without break line, and grounding.
www.shinestates.com 02
Explosion-proof magnetostrictive liquid level sensor
Installation
This method is available for the majority of tank measurements,using flange provided by the manufacturer
(or user specially customized flange),screwed the liquid level transmittersdirectly into mounting-hole
on the flange tightly, and then connect flange on the tank.
M18x1.5
A
1.6
Interface level floater
Size
Thread code
( ) A B C
ME M18x1.5 φ20.0 +0
-0.1 φ18.7
C1×45° MF M20x1.5 φ21.6 +0 φ20.3
-0.1
G6 3/4-16UNF φ20.3 +0
-0.1 φ19.3
www.shinestates.com 03
Explosion-proof magnetostrictive liquid level sensor
Output signal
□ □ □ □ □
Current or Voltage Output range Float number Stroke direction Operating voltage
Analog output A:Current 1、4~20mA 2、0~20mA
V:Voltage 1、0~10V 2、0~5V
A:FBS105G(see Attached table 3-3) A:Mounting accessories group FJ-1(see attached table 3-4)
B:FBS105L(see Attached table 3-3) X: No mounting accrssory
C:FBS105I(see Attached table 3-3)
X:No liquid level flaoter and interface floater
www.shinestates.com 04
Explosion-proof magnetostrictive liquid level sensor
5.0 0.0
76.0 φ7 φ5
50.0
φ 78.5 φ 52.4
Floater type:FBS105L Floater type:FBS105G
3 3
Material:SUS316L Density:0.6g/cm Material:SUS316L Density:0.6 g/cm
Pressure:1.5MPa Minimum level height:55mm Pressure:1.5MPa Minimum level height:40mm
φ 15.5
0.0
φ5
50.0
φ 52.4
Floater type:FBS105I
3
Material:SUS316L Density:0.93 g/cm
Pressure:2.5MPa Minimum level height:40mm
www.shinestates.com 05