Professional Documents
Culture Documents
SEARS
'ROEBUCK AND CO
ON YOUR KENMORE SEWING MACHINE
CARE FREE
STITCHING
depends on the THREADING
SHUTTLE
Ltr! sien
out of ten stitching and the WATTLE
problems are caused by
the “Big Three”. Most
others are cause b SLIPPAGE, SLUGGISHNESS, TENSION
the Littl Three
What’s more, they e
not serious. You can
orrect them yourse If
and save much time and If you have a stitching problem, check the “Big Three” and the “Little Three.”
n ext sewing
tisfactio Usually, you'll solve it yourself quickly. If not, Hien call your service man.
THE NEEDLE
Your needle may be the culprit. Skipped stitches or broken
SHUTTLE
== lint and thread collect in
thread is the result. So CHANGE THE NEEDLE making __the shuttle. Even a small
sure the flat side is in the correct
|position as described | unseen amount may Cause
2 below. Use only Kenmore number’ 6021 needles. Others _ — noise or jamming. CLEAN
look the same but may be slightly different in dimensions. = LHESHUTTLE. The instruc.
== tion book gives the details
cSee removing lint), Make |
sure the shuttle is always _
clean. a
case.
=== 7 €
book.
Check presser
foot Upper thread too tight
pressure. Decrease tension
2257
Upper thread too loose
Check stitch
length. Sa Correct stitching