Professional Documents
Culture Documents
• Double Insulation
• Degree of protection IP65
• Reinforced UL-V0 thermoplastic fiber-glass body
• Positive Opening Operation
• Minimum Actuation Force/Torque
• Minimum Force to achieve Positive Opening Operation
• Precise operating points (consistency)
• Immune to electromagnetic disturbances
• Zb type contact blocks
• Current Ith = 10A
• Rated insulation voltage Ui = 500V
• UL, CSA, CE
• Conform with IEC 947-5-1 (EN 60947-5-1)
Contact block
Head type
Options
1 Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network.
Technical Data
Standards IEC 60947-1, IEC 60947-5-1, EN 60947-1, EN 60947-5-1,
UL508 and CSA C22-2 n°14
Certifications – Approvals UL – CSA
Air temperature near the device
- during operation °C -25 … +70
- for storage °C -30 … +80
Climatic withstand According to IEC 68-2-3 and salty mist according to IEC 68-2-11
Mounting positions All positions are authorized
Shock withstand (according to IEC 68-2-27 and 60068-2-27) g 50g*
(1/2sinusoidal shock for 11 ms) no change in contact position
Resistance to vibrations (acc.to IEC 68-2-6 and EN 60068-2-6) g 25g (10…500Hz) no change in position of contacts greater
than 100µs
Protection against electrical shocks (acc.to IEC 536) Class II
Degree of protection (according to IEC 529 and EN 60529) IP65
Consistency (measured over 1 milion operations) 0.1 mm (upon closing point)
* except for PS21/PS42 with head type W0, W1: 25g.
Electrical Data
Rated insulation voltage Ui
-according to IEC 60947-1 and EN 60947-1 500V (degree of pollution 3)
-according to UL 508, CSA C22-2 n°14 A 600, Q 600
Rated impulse withstand voltage Uimp kV 6
(according to IEC 60947-1 and EN 60947-1)
Conventional enclosed thermal current Ithe A 10
(according to IEC 60947-5-1 and EN 60947-5-1) (θ≤40°C)
Short-circuit protection - gG type fuses A 10
Electrical durability (according to IEC 60497-5-1 annex C) Utilization categories AC-15 and DC-13 (see curves and value below)
- max. switching frequency Cycles/h 3600
- load factor 0,5
Diagram for snap action Diagram for slow action Electrical durability for DC-13 utilization category
contact: contact:
5 5
3
Power breaking for a durability of 5 million operating cycles
3
12 -
48
130
24
2
2
Snap action Slow action
Millions of operating cycles
23
0
23
12
0-
1 24 48 1
-2
0
4
40
0
13
0
Voltage 24V 9,5W 12W
0.5 0.5
Voltage 48V 6,8W 9W
0.3 0.3 Voltage 110V 3,6W 6W
0.2 0.2
0.1 0.1
0.2 0.3 0.5 1 2 3 5 10 1 2 3 5 10
Current (A) Current (A)
Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network. 2
Limit Switches - Limit Type (PS21)
Plastic Body IP65
22 24.5
Cable Gland O4
20 12.5
4
PG13.5
M = one cable inlet M20x1.5 cable gland M20x1.5
1/2"NPT
N = one cable inlet 1/2” NPT cable gland PG11
53
M20x1,5
B = one cable inlet PG11 cable gland
A = one cable inlet M16x1.5 cable gland
31
13-14
84
13-14
73
0 4.9 9.0 14.5 21.0 mm 0 6.0 10.5 21.0 mm 0 10.2 14.6 21.0 mm
O 12.5
30°
21-22 21-22 21-22
13-14 13-14 13-14
39 20 21-22 8.6 5.4
19.5
13-14
92
21
T02 T20 S02
0 5.7 10.2 21.0 mm 0 5.3 21.0 mm 0 5.1 8.6 13.1 21.0 mm
11-12 13-14 11-12
21-22 23-24 21-22
11-12
21-22
(mm)
Conformity / (NC) / Plastic roller lever
Max. Actuation speed 1.0ms Code on metal plunger PS21L- RV-T00
Min. force or torque 7N / 24Nm on plastic plunger PS21L- RR-T00
Weight 80g
12.5
S11 T11 O11
5
30° 0 4.9 9.0 14.5 21.0 mm
20
13-14 13-14
31
0 4.9 9.0 14.5 21.0 mm 0 6.0 10.5 21.0 mm 0 10.2 14.6 21.0 mm
21-22 21-22 21-22
20
39
13-14
104
13-14
104
Cable Gland O4
20 12.5
4
PG13.5
M = one cable inlet M20x1.5 cable gland M20x1.5
1/2"NPT
N = one cable inlet 1/2” NPT cable gland PG11
53
M20x1,5
B = one cable inlet PG11 cable gland
A = one cable inlet M16x1.5 cable gland
45
40
S11 T11 O11
15
0 17° 31° 47° 74° 0 21° 37° 74° 0 35° 51° 74°
O 18 5.5 21-22 21-22
21-22
13-14 13-14 13-14
21-22 30° 18°
17.5
13-14
53
36
0 19° 37° 74° 0 18° 74° 0 17° 30° 46° 74°
11-12 13-14 11-12
21-22 23-24 21-22
11-12
21-22
(mm)
Conformity / (NC) EN 50047 / Ø 18 Nylon roller lever
Max. Actuation speed 1.5ms Code PS21L- RT-T00
Min. force or torque 0.10N / 0.32Nm
Weight 95g
51
43.5
S11 T11 O11
O 50 9 0 17° 31° 47° 74° 0 21° 37° 74° 0 35° 51° 74°
21-22 21-22 21-22
13-14 13-14 13-14
21-22 30° 18°
13-14
69
17.5
36
0 19° 37° 74° 0 18° 74° 0 17° 30° 46° 74°
11-12 13-14 11-12
21-22 23-24 21-22
11-12
21-22
(mm)
Conformity / (NC) / Ø 50 Rubber roller lever
Max. Actuation speed 1.5ms Code PS21L- W0-T00
Min. force or torque 0.10N / 0.32Nm
Weight 115g
15.5
S11 T11 O11
O 18 5.5
0 17° 31° 47° 74° 0 21° 37° 74° 0 35° 51° 74°
21-22 21-22 21-22
13-14 13-14 13-14
21-22 30° 18°
61
13-14
17.5
114
17.5
36
0 19° 37° 74° 0 18° 74° 0 17° 30° 46° 74°
11-12 13-14 11-12
21-22 23-24 21-22
11-12
21-22
(mm)
Conformity / (NC) / Ø 18 Nylon roller lever
Max. Actuation speed 1.5ms Code PS21L- BE-T00
Min. force or torque 0.10N / 0.32Nm
Weight 95g
5 Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network.
45.5
41
S11 T11 O11
O 18 5.5
0 17° 31° 47° 74° 0 21° 37° 74° 0 35° 51° 74°
21-22 21-22 21-22
13-14 13-14 13-14
19...91
34 21-22 30° 18°
13-14
17.5
98.5...170.5
T02 T20 S02
42 0 18° 74°
0 19° 37° 74° 0 17° 30° 46° 74°
11-12 13-14 11-12
21-22 23-24 21-22
11-12
21-22
(mm)
Conformity / (NC) / Adjustable lever with Ø 18 nylon roller
Max. Actuation speed 1.5ms Code PS21L- R1-T00
Min. force or torque 0.10N / 0.32Nm
Weight 105g
52
44.5
S11 T11 O11
O 50 9
0 17° 31° 47° 74° 0 21° 37° 74° 0 35° 51° 74°
21-22 21-22 21-22
13-14 13-14 13-14
21-22 30° 18°
13-14
126.5...186.5
33...91
32.5
17.5
114.5...186.5
Cable Gland O4
20 12.5
4
PG13.5
M = one cable inlet M20x1.5 cable gland M20x1.5
1/2"NPT
N = one cable inlet 1/2” NPT cable gland PG11
53
M20x1,5
B = one cable inlet PG11 cable gland
A = one cable inlet M16x1.5 cable gland
30
13-14 13-14
21-22 30° 18°
13-14
Maxi 230.5
170
17.5
13-14
O6
195
0 17° 31° 47° 74° 0 21° 37° 74° 0 35° 51° 74°
21-22 21-22 21-22
3 13-14 13-14 13-14
Maxi 177.5
170
115
O 6.2 21-22 21° 12°
13-14
168
T02 T20 S02
0 14° 0 13° 0 12° 22°
11-12 13-14 11-12
21-22 23-24 21-22
11-12
21-22
(mm)
Conformity / (NC) / Multidirectional nylon actuator with stainless steel spring
Max. Actuation speed 1.0ms Code PS21L- LP-T00
Min. force or torque 0.12N / -
Weight 85g
S11 T11 O11
0 12° 23° 0 14° 0 25°
21-22 21-22 21-22
13-14 13-14 13-14
117
T02 T20
127
(mm)
Conformity / (NC) / Pull action with ring
Max. Actuation speed 0.5ms Code PS21L- N6-T00
Min. force or torque 30N / -
Weight 115g
Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network. 8
Utilization precautions
Plain plunger
Correct Incorrect
30° 30°
Correct
30°
Incorrect Incorrect
Adjustement
Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network. 10