Professional Documents
Culture Documents
SMR-25 年度维护保养计划 Ship Annual Maintenance Plan
SMR-25 年度维护保养计划 Ship Annual Maintenance Plan
舷墙 检查锈蚀、损伤,视情割换 三个月
104 Bulwark Check corrosion, damage, renewal 3 months C/O √ √ √ √
甲板上消防管、
空气管、冲洗管
、泄水管 检查、除锈、油漆, 损坏部分进行割换
三个月
105 Fire pipe, air pipe, Inspection, derust, painting, Renew 3 months C/O √ √ √ √
flushing pipe, damage part
scupper on deck
公共舱室、厕所
、走廊等 除锈、油漆、保养 六个月
106 Public cabin, toilet, Derust, painting, maintenance 6 months C/O √ √
hallway
厨房内设备 三个月
107 Kitchen 清洁油漆Cleaning, paint
3 months C/O √ √ √ √
备品间、食品间
及内部设备 三个月
108 Store & provision 冲洗 清洁Cleaning 3 months C/O √ √ √ √
room
冷库 每月
109 Refrigerant room 清洁Cleaning Monthly C/O √ √ √ √ √ √ √ √ √ √ √ √
机炉舱风斗的外
除锈、油漆、保养、维修 三个月
110 段、天窗的外表 Derust, painting, maintenance, repair 3 months C/O √ √ √ √
E/R vent device
编号 维护养护项目 检查维护内容 间隔期 上次检修时间 责任人 1月 2月 3月 4月 5月 6月 7月 8月 9月 10月 11月 12月 备注
No. Maintenance Items Inspection & Maintenance Contents Interval Last maintenance time PIC JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC Remarks
烟囱外表及 支索
除锈、油漆、保养、维修 三个月
111 Funnel surface & Derust, painting, maintenance, repair 3 months C/O √ √ √ √
jackstay
桅杆、旗杆、大 除锈、油漆、保养、维修 三个月
112 桅Mast Derust, painting, maintenance, repair 3 months C/O √ √ √ √
2. 货舱设备Cargo Hold
编号 维护养护项目 检查维护内容 间隔期 上次检修时间 责任人 1月 2月 3月 4月 5月 6月 7月 8月 9月 10月 11月 12月 备注
No. Maintenance Items Inspection & Maintenance Contents Interval Last maintenance time PIC JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC Remarks
检查锈蚀、破损,视情况换新 每月
Check corrosion, damage & renew Monthly C/O √ √ √ √ √ √ √ √ √ √ √ √
肋骨及格栅
202 Frame & cell guide
全面除锈、油漆,损坏处换新
Derust, painting completely & renew 两年半 NO
2.5 years C/O
damage part FIXED
污水井及黄蜂巢 每月
203 Bilge bell 清洁、畅通Cleaning, unblocked Monthly C/O √ √ √ √ √ √ √ √ √ √ √ √
检查锈蚀、破损、水密装况,钢板、密
封条局部换新 三个月
舱盖及舱口围板 Check corrosion, damage, watertight 3 months C/O √ √ √ √
204 Hatch cover and condition & renewal partly
coaming
除锈、油漆、换板 两年半 NO
Derust, painting and renewal 2.5 years C/O
FIXED
检查、除锈、油漆 三个月
Check, derust, painting, 3 months C/O √ √ √ √
电缆管、空气管
、测深管 电缆管损坏修理 三个月
205 Cable pipe, air C/O √ √ √ √
Cable pipe damage part repair 3 months
pipe, sounding pipe
压载舱空气管、测深管损坏修理 三个月
Air & sounding pipe repair 3 months C/O √ √ √ √
4. 舵装置Steering Gear
编号 维护养护项目 检查维护内容 间隔期 上次检修时间 责任人 1月 2月 3月 4月 5月 6月 7月 8月 9月 10月 11月 12月 备注
No. Maintenance Items Inspection & Maintenance Contents Interval Last maintenance time PIC JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC Remarks
操舵转动装置(液
检查有无漏油、绝缘情况 三个月
401 压及电动) Check oil leaking, insulation 3 months C/O √ √ √ √
Steering gear
舵杆、舵承、舵 测量舵承间隙,检查舵叶焊缝,视情修
两年半 NO
402 叶Rudder, stock, 理Measure clearance, welding seam and
2.5 years C/O
bearing, blade repair if necessary FIXED
检查锚齿、锚杆有无损伤、变形、裂痕
Check anchor teeth, stock if damage, 三个月
锚及备用锚 3 months C/O √ √ √ √
501 Anchor and spare deform and crack
anchor
除锈、油漆 两年半 NO
Derust, painting 2.5 years C/O
FIXED
锚链及掣链装置 检查锚链锈蚀,横档有无松脱,掣链装
置是否灵活,视情修理 三个月
502 Anchor chain and Check chain corrosion, crosspiece slacken, 3 months C/O √ √ √ √
stopper
stopper free or not
缆绳及防鼠挡
检查磨损情况,视情修复、换新 三个月
503 Mooring rope and Check wear, repair or renew 3 months C/O √ √ √ √
rat defense
机械部分加甘油,离合器、刹车带检查 三个月
,固定部分维修、检查、保养
3 months C/O √ √ √ √
锚机、绞缆机 Greasing, clutch& brake check
504 Windlass, mooring
equipment 其余机械、电气部分维修、检查、保养
Mechanical, electric part inspect and 三个月
3 months C/O √ √ √ √
maintenance
撇缆绳、软硬靠
检查磨损情况,视情更换 三个月
505 把Throw rope, Check wearing, renew if necessary 3 months C/O √ √ √ √
cushion
检查锈蚀、清洁 六个月
Check corrosion And cleaning 6 months C/O √ √
锚链舱
506 Chain locker
清除淤泥、除锈、油漆,壳板锈漏处割 两年半 NO
换Clear mud, derust, painting, renew 2.5 years C/O
FIXED
缆桩、羊角、地
令、滚筒、滚轮
、导缆孔、钢丝 除锈、油漆、活络 三个月
507 等 Bollard, fair Derust, painting, free up 3 months C/O √ √ √ √
lead, ring, wire
rope
检查锈蚀、变形及水密情况视情修理 三个月
601 Check corrosion, deform & repair 3 months C/O √ √ √ √
水密门
Watertight Door
检查吊壳体有无变形、损伤,除锈、补
漆Check Crane post deformation, damage, 三个月 C/O √ √ √ √
3 months
derust & painting
检查吊顶滑车销端盖是否完好 每次使用
Check Crane top sheave block pin ‘s 前Before C/O √ √ √ √ √ √ √ √ √ √ √ √
吊体 safety cover fitted or not working
701 Crane column
吊顶滑车沟槽磨损情况,加注甘油
Check Crane top sheave block groove 三个月
3 months C/O √ √ √ √ √
wearing condition, greasing
检查钢丝绳滚轮磨损情况 三个月
Check Wire rope roller wearing condition 3 months C/O √ √ √ √
检查吊臂转销有无磨损 三个月
Check Jib pivot pin wearing condition 3 months C/O √ √ √ √
吊臂轴承加注甘油 三个月
Greasing Jib bearing 3 months C/O √ √ √ √
吊臂滑车沟槽磨损情况,加注甘油
吊臂 Jib Sheave block Groove wearing 三个月
702 3 months C/O √ √ √ √
Jib condition, greasing
每次使用
吊臂滑车销的端盖是否完好 前Before
Jib sheave block pin Cover on place or not C/O √ √ √ √ √ √ √ √ √ √ √ √
working
举臂油缸轴承加注甘油 三个月
Greasing Luffing cylinder bearing 3 months C/O √ √ √ √
滚筒轴承是否有异常声响,加注甘油
Check Winch drum bearing if abnormal 三个月
3 months C/O √ √ √ √
noise, greasing
刹车带磨损情况,是否有油
Brake lining Wearing condition, oil 三个月
3 months C/O √ √ √ √
pollution
吊货及升降滚筒 刹车油缸是否漏油,及时修理
703 Hoisting & Luffing Brake cylinder If oil leaking, restore in 三个月
3 months C/O √ √ √ √
Drum time
每次使用
检查齿轮箱油位
Check gear box oil level
前Before C/O √ √ √ √ √ √ √ √ √ √ √ √
working
检查钢丝绳位置是否正好落座在滚筒上 每次使用
Check wire rope position if spool on drum 前Before C/O √ √ √ √ √ √ √ √ √ √ √ √
correctly working
检查液压油管是否锈穿、漏油,及时修 每次使用
理Check hydraulic oil piping if corrosion, 前Before C/O √ √ √ √ √ √ √ √ √ √ √ √
leaking, to restore in time working
检查壳体有无损伤,除锈、补漆
Check body plate if damage, derust & 三个月
3 months C/O √ √ √ √
painting
钩头滑车销端盖是否完好
Hook sheave block pin if end cover retain 三个月
3 months C/O √ √ √ √
吊货钩头 in good order
704 Hook blocks
钩头滑车沟槽磨损情况,加注甘油
Hook sheave block wear condition in 三个月
3 months C/O √ √ √ √
groove, greasing
检查钩头转轴是否活动自如,加注甘油 三个月
Check hook rotary shaft if free, greasing 3 months C/O √ √ √ √
检查固定螺栓是否松脱 三个月
Check mounting bolts if slacken 3 months C/O √ √ √ √
齿轮箱轴承是否有异常声响,及时修理
705
回转齿轮箱 Gear box bearing if abnormal noise, repair 三个月 C/O √ √ √ √
Slewing gear box in time 3 months
刹车带磨损情况,是否有油
Brake lining wear condition ,if oil 三个月
3 months C/O √ √ √ √
pollution
编号 维护养护项目 检查维护内容 间隔期 上次检修时间 责任人 1月 2月 3月 4月 5月 6月 7月 8月 9月 10月 11月 12月 备注
No. Maintenance Items Inspection & Maintenance Contents Interval Last maintenance time PIC JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC Remarks
刹车油缸是否漏油,及时修理 三个月
Brake oil cyl if oil leaking, repair in time 3 months C/O √ √ √ √
每次使用
回转齿轮箱 检查齿轮箱油位
705 前Before C/O √ √ √ √
Slewing gear box Check Gear box oil level working
检查液压油管是否锈穿、漏油,及时修 每次使用
理Check hydraulic oil piping if corrosion, 前Before C/O √ √ √ √
oil leaking, to restore in time working
检查大齿轮啮合磨损情况、涂甘油
吊体轴承 Check gar rim engagement wearing 三个月
706 3 months C/O √ √ √ √
Slewing bearing condition, apply grease
检查固定螺栓有无否松脱 ,除锈、油
漆Check mounting bolts if slacken, derust 三个月
3 months C/O √ √ √ √
& painting
检查钢丝绳位置是否正好落座在滚筒上 每次使用
Check wire rope position if stay on drum 前Before C/O √ √ √ √ √ √ √ √ √ √ √ √
吊货及升降钢丝 properly working
707 Hoisting, luffing
wire 检查钢丝状况磨损情况、涂甘油
Check wire rope condition wearing 三个月
3 months C/O √ √ √ √
condition, apply grease
检查油泵固定螺栓是否松脱 三个月
Check oil pump solid bolts if slacken 3 months C/O
检查液压油管是否锈穿、漏油,及时修 每次使用
理Check hydraulic oil piping if corrosion, 前Before C/O √ √ √ √ √ √ √ √ √ √ √ √
leaking, restore in time working
液压系统 每次使用
708 Hydraulic system 检查油箱油位Check oil box oil level 前Before C/O √ √ √ √ √ √ √ √ √ √ √ √
working
三个月
检查滤器、清洗Check filter, cleaning 3 months C/O √ √ √ √
检查蓄压器是否使用正常 三个月
Check accumulator if work normal 3 months C/O √ √ √ √
检查压力安全阀是否调整正常
Check pressure relief valve if adjust 三个月
3 months C/O √ √ √ √
correctly
每次使用
检查给油压力是否正常
Check feed oil pressure if run normal
前Before C/O √ √ √ √ √ √ √ √ √ √ √ √
working
每次使用
检查控制油压是否正常
液压系统 Check control oil pressure if run normal
前Before C/O √ √ √ √ √ √ √ √ √ √ √ √
708 Hydraulic system working
检查吊货、升降、回转油压是否正常 每次使用
Check hoisting, Luffing, slewing pressure 前Before C/O √ √ √ √ √ √ √ √ √ √ √ √
if run normal working
每次使用
检查油温是否正常
Check oil temperature if run normal
前Before C/O √ √ √ √ √ √ √ √ √ √ √ √
working
操纵室及吊体内 检查、保养操纵室内部,损坏部位进行
三个月
709 部 Oper.R. & 修复Check, maintenance control room,
3 months C/O √ √ √ √
Inner restore if found damage
8. 救生设备Lifesaving Equipment
编号 维护养护项目 检查维护内容 间隔期 上次检修时间 责任人 1月 2月 3月 4月 5月 6月 7月 8月 9月 10月 11月 12月 备注
No. Maintenance Items Inspection & Maintenance Contents Interval Last maintenance time PIC JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC Remarks
救生设备
每周
801 Lifesaving 外观检查Inspection externally
Weekly 3/O √ √ √ √ √ √ √ √ √ √ √ √
equipment
全面检查有无损坏变形,视情况修理 每月
Check damage, repair if necessary Monthly 3/O √ √ √ √ √ √ √ √ √ √ √ √
救生艇艇身
802 Lifeboat shell plate
检查、修整、刷洗、油漆、空气箱试压 两年半 NO
Check, restore, cleaning, painting 2.5 years 3/O
FIXED
艇内备品
清点、修换、补充 三个月
804 Spare part in Check and amount, restore, replace 3 months 3/O √ √ √ √
lifeboat
钢丝加油 三个月
Greasing 3 months 3/O √ √ √ √
吊艇钢丝
805 Wire rope
5年 NO
换新 renew 3/O
5 years FIXED
9. 消防设备Fire Fighting Equipment
编号 维护养护项目 检查维护内容 间隔期 上次检修时间 责任人 1月 2月 3月 4月 5月 6月 7月 8月 9月 10月 11月 12月 备注
No. Maintenance Items Inspection & Maintenance Contents Interval Last maintenance time PIC JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC Remarks
水灭火系统
全面检查管系修理 三个月
901 Water fire fighting 3 months 3/O √ √ √ √
system
General inspection Piping repair
检查、清洁、晾晒(转换折叠缝) 水龙 三个月
3 months 3/O √ √ √ √
皮龙箱 带Check, clean, dry in the sun fire hose
902 Fire hose box
每年
除锈、油漆Derust, painting Annually 3/O √
消防栓、喷嘴 三个月
903 Hydrant ,nozzle 检查、保养Check, maintenance 3 months 3/O √ √ √ √
消防员装备 三个月
904 Fire man outfit 检查、清点Check and amount 3 months 3/O √ √ √ √
Co2灭火系统
由专业厂家进行称重、吹通试验 两年 NO
905 Fire fighting 2 years 3/O
Check weight, blow test FIXED
system
舟车式泡沫灭火
检查、试验药剂 六个月
906 器Foam fire 6 months 3/O √
fighting
Check and test chemical
检查、清洁、油漆、晾晒沙箱内应各
沙箱 三个月
908 Sand box etc. 有小簸箕或沙斗一只 3 months 3/O √ √ √ √
Check ,clean, paint and dry in the sun
太平斧 检查、除锈、油漆 三个月
909 Axe 3/O √ √ √ √
Check, derust and paint 3 months
10. 堵漏设备 Anti Flooding Equipment
编号 维护养护项目 检查维护内容 间隔期 上次检修时间 责任人 1月 2月 3月 4月 5月 6月 7月 8月 9月 10月 11月 12月 备注
No. Maintenance Items Inspection & Maintenance Contents Interval Last maintenance time PIC JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC Remarks
堵漏木料 检查、晾晒、清洁 六个月
1001 Wood plug etc. C/O √ √
Check, dry in the sun, clean 6 months
堵漏器材
Leak stop
equipment (bolt,
blanket, water 检查、除锈、油漆、加油、活络 六个月
1002 proof mat, steel 6 months C/O √ √
Check, derust, paint, grease and free up
wire net, sheave,
shackle, fiber, batt
etc)
11. 通讯设备Communication Equipment
编号 维护养护项目 检查维护内容 间隔期 上次检修时间 责任人 1月 2月 3月 4月 5月 6月 7月 8月 9月 10月 11月 12月 备注
No. Maintenance Items Inspection & Maintenance Contents Interval Last maintenance time PIC JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC Remarks
功能自检试验 每天
Every day 2/O √ √ √ √ √ √ √ √ √ √ √ √
甚高频无线电话 Function check, test
1101 VHF.DSC
清洁、实际操作检测 每周
2/O √ √ √ √ √ √ √ √ √ √ √ √
Clean, operate actually Weekly
搜救雷达应达器
清洁、功能自检试验 每月
1102 SART Radar 2/O √ √ √ √ √ √ √ √ √ √ √ √
transponder
Clean, function check, test Monthly
卫星紧急无线电 功能自检试验 每月
1103 示位标 EPIRB Monthly 2/O √ √ √ √ √ √ √ √ √ √ √ √
Function check, test
(EPIRB)电池 有效期 NO
1104 更换Replacement Expiry 2/O
battery FIXED
(EPIRB)压力释放 有效期 NO
1105 更换Replacement Expiry 2/O
器Hydr. release FIXED
中/高频无线电收 清洁、试验Clean, test 每月
Monthly 2/O √ √ √ √ √ √ √ √ √ √ √ √
发装置
1106 MF/HF NBDP
清洁、实际操作检测 每周
DSC Weekly 2/O √ √ √ √ √ √ √ √ √ √ √ √
Clean, operate actually
国际海事卫星通
信船站 每月
1107 INMARSAT 清洁、试验Clean, test Monthly 2/O √ √ √ √ √ √ √ √ √ √ √ √
station
NAVTEX接收机 每月
1108 清洁、试验Clean, test Monthly 2/O √ √ √ √ √ √ √ √ √ √ √ √
NAVTEX Receiver
通信用蓄电池 每月
1109 Accumulator 检查、充电Check, charge Monthly 2/O √ √ √ √ √ √ √ √ √ √ √ √
天线 每月
1111 Antenna 清洁、目视检查Clean, check Monthly 2/O √ √ √ √ √ √ √ √ √ √ √ √
所有设备 每年
1112 All equipments 每年检验 Annual survey. Annually 2/O √
机械传动部分加油、清洁检查天线连 半年
气象传真机
1203 Weather fax 接电缆、接地线 2/O √ √
Half a year
Grease, clean, check
自动操舵仪
清洁、加油
1204 Rudder operation 日常Usual 2/O √ √ √ √ √ √ √ √ √ √ √ √
system
Clean, grease
清洁、误差校正、添加蒸馏水或甘油
陀螺罗经 Clean, autodyne calibration, refill
1205 Gyro compass 日常Usual 2/O √ √ √ √ √ √ √ √ √ √ √ √
distilled water or grease
测深仪 清洁、调整发射零位
1206 Echo sounder 日常Usual 2/O √ √ √ √ √ √ √ √ √ √ √ √
Clean, adjust zero position
开航前
输入航行计划 Before
1207 AIS 2/O √ √ √ √ √ √ √ √ √ √ √ √
Input voyage data
departure
开航前
自检、测试 Self test Before 2/O √ √ √ √ √ √ √ √ √ √ √ √
航行数据记录仪 departure
1208 VDR
每年
年度检验 Annual survey. Annually 2/O √
六分仪、天文钟
、望远镜 检查、校正、清洁 三个月
1211 Sextant, chro- 3 months 2/O √ √ √ √
Check, calibration, cleaning
nometer, binocular
倾斜仪、气压表
、风速仪、气象
仪Clinometers, 检查、清洁保证正常使用
Check, clean and ensure working 三个月
1212 barom-eter, 3 months 2/O √ √ √ √
anemoscope, normal
weather instrument
气笛拉索、滑轮
检查、加油、活络 三个月
1213 Whistle wire and 3 months 2/O √ √ √ √
sheave block
Check, grease, free up
车钟 三个月
1214 Engine telegraph 检查、清洁Check, clean 3 months 2/O √ √ √ √
扫雨器 三个月
1215 Window wiper 检查、清洁Check, clean 3 months 2/O √ √ √ √
压载水液位指示
三个月
1216 器Ballast water 清洁、检查Check, clean 3 months 2/O √ √ √ √
level indicator
操舵仪及舵角指
三个月
1217 示器Rudder angle 检查清洁、加油Check, clean, grease 3 months 2/O √ √ √ √
indicator
信号旗、绳及有
关国旗 三个月
1218 Code flag, rope, 检查、清点Check and amount 3 months 2/O √ √ √ √
National flag
电笛及自动雾笛
三个月
1219 Electric flute, fog 检查、修理Check, repair 3 months C/O √ √ √ √
flute
汽笛 三个月
1220 Whistle 检查、修理Check repair 3 months C/O √ √ √ √
13. 其他Others
活塞头分解检查、更换密封圈 NO
Piston head disassemble, check, renew packing 20000h 2/E
FIXED
NO
清洁气口Clean scavenge ports 3000h 2/E
FIXED
气缸 清洁检查、测量缸径锥度和椭园度,根据磨
102 Cylinder liner
损情况予以换新 10000- NO
Clean, check, measure bore dia taper and oval 2/E
12000h FIXED
degree, replace if necessary
安全阀&示功阀
清洁检查、阀研磨、调整压力 NO
104 Safety valve & Clean, check, lap valve, adjust pressure 2000h 2/E
Indication valve
FIXED
排气阀 NO
105 Exhaust valve 拆卸、检查、研磨Dismantle, check, lap 3000h 2/E
FIXED
拆卸、检查、压磅、视情况更换
燃油阀 Dismantle, check ,test pressure, renew if
NO
106 Fuel valve 1500h 2/E
necessary FIXED
测量曲柄销轴径、调整间隙、测量臂距差、
曲柄销轴承 清洁油孔、油槽 NO
107 Crank pin bearing Measure crank pin journal, adjust clearance, 12000h 2/E
FIXED
measure deflection, clean oil hole and oil groove
测量十字头销轴径、调整间隙、清洁油孔、
十字头轴承 油槽 NO
108 Crosshead bearing Measure crosshead pin journal, adjust clearance, 20000h 2/E
FIXED
clean oil hole and groove
定时传动装置 检查紧固镙丝,传动链条调整其松紧 NO
109 Timing drive device Check mounting bolt, adjust transmission chain 2000h 2/E
FIXED
编号 维护养护项目 检查维护内容 间隔期 上次检修时间 责任人 1月 2月 3月 4月 5月 6月 7月 8月 9月 10月 11月 12月 备注
No. Maintenance Items Inspection & Maintenance Contents Interval Last maintenance time PIC JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC Remarks
检查主轴承下沉量,调整间隙 NO
Check and adjust main bearing clearance 6000h 2/E
主轴承 FIXED
110 Main bearing 打开、检查、清通油孔、油槽 NO
Open, check, clean oil hole and groove 20000h 2/E
FIXED
NO
检查轴向间隙Check shaft direction clearance 3000h 2/E
FIXED
推力轴承、推力块
清洁检查推力轴承、推力块,调整间隙,清
111 Thrust bearing and 通油孔、油槽 NO
segment Clean and check thrust bearing, segment, adjust 20000h 2/E
FIXED
clearance, clean oil hole and groove
清洁检查滚轮、导筒、进出油阀件等,调整
高压油泵,出油阀 供油定时及油量 6000- NO
112 High pressure pump, Clean and check roller, guide way, oil inlet & 2/E
8000h FIXED
delivery valve outlet Valve, adjust timing and oil capacity
扫气箱 NO
113 Scavenge box 清洁检查Clean and check 3000h 2/E
FIXED
清洁检查进油滤器、轴承、密封、喷嘴、转
NO
114 增压器Turbocharger 子Clean and check inlet filter, bearing, labyrinth 12000h 2/E
packing, nozzle, rotor FIXED
压缩空气起动系统(主
起动阀、分配阀、及
启动阀) 清洁检查、阀研磨、保持气密及操纵灵活
6000- NO
115 Compressed air start Clean and check, lap valve, keep air tight and 2/E
system (main start operation free 8000h FIXED
valve, distributor and
cylinder start valve)
操纵系统及凸轮顶 检查清洁测量零件磨损情况,保持各控制阀件的气
杆机构 密性及操纵灵活,调整间隙 6000- NO
116 Control system and Check parts worn situation keep control valve air tight, 8000h 2/E
FIXED
Cam drive device adjust clearance
检查凸轮轴轴承及凸紧固镙丝,调整凸轮轴
凸轮轴 与滚轮的间隙 6000- NO
117 Camshaft Check camshaft bearing, mounting bolt, adjust 2/E
8000h FIXED
gap between cam and roller
活塞冷却系统
检查、清洁、更换密封圈 NO
118 Piston cooling Check, clean, renew packing 15000h 2/E
system FIXED
清洁、检查,更换滑油 6000- NO
119 注油器Lubricator Clean, check, renew lube oil 2/E
8000h FIXED
编号 维护养护项目 检查维护内容 间隔期 上次检修时间 责任人 1月 2月 3月 4月 5月 6月 7月 8月 9月 10月 11月 12月 备注
No. Maintenance Items Inspection & Maintenance Contents Interval Last maintenance time PIC JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC Remarks
主机滑油泵、主机 检查压力、排量是否正常 日常
2/E
燃油增压泵 Check if pressure & capacity normal Usual
120 M/E L.O pump, M/E
F.O boost pump 拆检、更换磨损部件 NO
Dismantle, renew worn parts 10000h 2/E
FIXED
主机滑油冷却器、
主机淡水冷却器 NO
121 M/E L.O and F.W 检查、疏通Check and dredge 1500h 大管轮/2E 2/E
FIXED
cooler
2. 辅机Auxiliary Engine(发电机Generator)
编号 维护养护项目 检查维护内容 间隔期 上次检修时间 责任人 1月 2月 3月 4月 5月 6月 7月 8月 9月 10月 11月 12月 备注
No. Maintenance Items Inspection & Maintenance Contents Interval Last maintenance time PIC JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC Remarks
取出活塞、清洁检查、测量记录,必要时更
柴油机活塞 换活塞环 10000- NO
201 Piston Withdraw piston, clean, check, measure or renew 12000h 3/E
FIXED
piston ring if required
清洁检查、测量缸径锥度和椭园度,根据磨
气缸 损情况予以换新 10000- NO
202 Cylinder liner Clean, check, measure bore dia taper and oval 3/E
12000h FIXED
degree, replace if necessary
拆下、检查各附件如吸、排伐、阀座、换新
气缸盖 各密封垫圈 5000- NO
203 Cylinder cover Dismantle, check suction & discharging 3/E
6000h FIXED
valve ,seat, renew all packing
滑油、燃油、冷却水
泵驱动机构 NO
204 L.O, F.O, C.W pump 打开、检查Open, check 5000h 3/E
FIXED
and drive gear
示功阀 NO
205 Indication valve 拆卸、检查、研磨Dismantle, check, lap 5000h 3/E
FIXED
燃油阀 拆卸、检查、压磅、视情况更换 NO
206 Fuel valve Dismantle, check ,test pressure, renew if required 1500h 3/E
FIXED
测量曲柄销轴径、测量臂距差、清洁油孔、
曲柄销轴承 油槽,检查轴瓦磨损情况 6000- NO
207 Crank pin bearing Measure journal, deflection, clean oil hole& 3/E
8000h FIXED
groove, check worn condition
增压器、空冷器 拆检、清洁、更换轴承 NO
208 T/C, air cooler Dismantle, clean, renew bearing 5000h 3/E
FIXED
编号 维护养护项目 检查维护内容 间隔期 上次检修时间 责任人 1月 2月 3月 4月 5月 6月 7月 8月 9月 10月 11月 12月 备注
No. Maintenance Items Inspection & Maintenance Contents Interval Last maintenance time PIC JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC Remarks
凸轮轴定时传动装
置 检查紧固镙丝,传动链条调整其松紧 NO
209 Camshaft timing Check mounting bolt, adjust drive chain 1500h 3/E
FIXED
drive gear
主轴承 打开、检查、清通油孔、油槽 NO
210 Main bearing Open, check, clean oil hole and groove 20000h 3/E
FIXED
推力轴承、推力块
清洁检查推力轴承、推力块 NO
211 Thrust bearing, Clean, check thrust bearing and segment 10000h 3/E
thrust segment FIXED
清洁检查滚轮、导筒、进出油阀件等,调整
高压油泵,出油阀 供油定时及油量 NO
212 High pressure pump, Clean, check roller, guide way, oil valve; adjust 10000h 3/E
delivery valve FIXED
injection timing& capacity
进、排气阀
NO
213 Suction & 检查、调整Check, adjustment 1500h 3/E
discharging valve FIXED
冷却水泵 拆检、更换水封、油封 NO
214 Cooling water pump Dismantle, renew seal ring 10000h 3/E
FIXED
压缩空气起动系统
(主起动阀、分配阀
、及启动阀) 清洁检查、阀研磨、保持气密及操纵灵活
NO
215 Compressed air start Clean & check, lap valve, keep air tight and 10000h 3/E
system (main start operation free FIXED
valve, distributor &
Cylinder start valve)
燃油泵 检查清洁测量零件磨损情况 NO
216 Fuel pump Clean, measure, check parts worn condition 10000h 3/E
FIXED
联轴节 检查联轴节弹簧及盘面的对中 NO
217 Coupling Check coupling spring and alignment 20000h 3/E
FIXED
调速器 检查、清洁、更换磨损部件 NO
218 Governor Check, clean, renew worn parts 10000h 3/E
FIXED
连杆螺栓 NO
219 Connection rod bolts 换新Renew 20000h 3/E
FIXED
应急发电机原动机
试车冬季注意保温防冻 每周
301 Emergency Running test, prevent from freeze in winter Weekly 4/E √ √ √ √ √ √ √ √ √ √ √ √
generator diesel
应急发电机及配电
板Emergency 每月
302 generator & 检查清洁Check ,clean
Monthly E/E √ √ √ √ √ √ √ √ √ √ √ √
switchboard
应急照明蓄电池
每月
303 Accumulator for 检查清洁Check, clean
Monthly E/E √ √ √ √ √ √ √ √ √ √ √ √
emergency lighting
应急消防泵(移动式 检查、启动、压头和排量是否可达到标准,
、固定式) 视情检修 每周
304 Start, check if pressure and capacity reach Weekly 4/E √ √ √ √ √ √ √ √ √ √ √ √
Emergency fire
pump standard, repair if necessary
应急空压机
检查试车冬季注意保温防冻 每周
305 Emer-gency Check, run test, prevent from freeze in winter Weekly 3/E √ √ √ √ √ √ √ √ √ √ √ √
compressor
应急舱底水阀、机 每月
活络上油效用试验一次Free up, grease , test Monthly 2/E √ √ √ √ √ √ √ √ √ √ √ √
炉舱地轴弄水密门
E/R emergency bilge
306 suction valve,
解体检查舱底阀
hydraulic operation Disassemble, check emergency bilge suction 每年
Annually 2/E √
watertight door valve
锅炉安全阀遥控装
置Boiler safety 按具体情况进行手拉效用试验一次 每月
307 valve remote control Test function as per actual situation Monthly 4/E √ √ √ √ √ √ √ √ √ √ √ √
device
压缩空气瓶安全阀
检查, 每年泵气试跳一次 每月
308 Air reservoir relief Monthly 3/E √ √ √ √ √ √ √ √ √ √ √ √
Check, test function every year
valve
主机应急操纵装置,
紧急停车装置
三个月
309 M/E emergency 检查、修理Check, repair
3 months 2/E √ √ √ √
operation device,
urgency stop device
风油切断装置
Ventilation, fuel oil 每月
310 emergency stop 功能试验Test function
Monthly 2/E √ √ √ √ √ √ √ √ √ √ √ √
device
各警报铃
每月
311 All kind of alarm 检查、试验Check, test
Monthly E/E √ √ √ √ √ √ √ √ √ √ √ √
bell
各备用泵及备用空
压机
检查试车一次交替使用 每月
312 All kind of stand-by Check and test, work alternately Monthly E/E √ √ √ √ √ √ √ √ √ √ √ √
pump and stand- by
compressor
机舱天窗开关
E/R skylight 三个月3
313 openingand shutting 检查、试验Check, test 2/E √ √ √ √
months
device
应急舵
每月
314 Emergency steering 检查、试验Check, test Monthly 2/E √ √ √ √ √ √ √ √ √ √ √ √
gear
4. 报警装置Alarm Device
编号 维护养护项目 检查维护内容 间隔期 上次检修时间 责任人 1月 2月 3月 4月 5月 6月 7月 8月 9月 10月 11月 12月 备注
No. Maintenance Items Inspection & Maintenance Contents Interval Last maintenance time PIC JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC Remarks
主机淡水、排气高
温警报 三个月
401 M/E F.W, exhaust 模拟功能试验Simulation test 3 months 2/E √ √ √ √
temp alarm system
主机滑油压力警报
三个月
402 M/E L.O pressure 模拟功能试验Simulation test 3 months 2/E √ √ √ √
alarm
主机应急停车警报
三个月
403 M/E emergency stop 检查、试验Check, test 3 months 2/E √ √ √ √
alarm
付机压力、温度警
报 三个月
404 A/E pressure/temp 模拟功能试验Simulation test 3 months 3/E √ √ √ √
limit alarm
付机超速保护装置
三个月
405 A/E over speed 功能试验Test function
3 months 3/E √ √ √ √
protection device
锅炉警报
三个月
406 Boiler running 功能试验Test function
3 months 4/E √ √ √ √
protection alarm
主配电板脱扣装置
三个月
407 Main switchboard 模拟功能试验Simulation test 3 months E/E √ √ √ √
trip device
通用警报 每周
408 General alarm 功能试验Test function Weekly E/E √ √ √ √ √ √ √ √ √ √ √ √
污水警报 每月
409 Bilge water alarm 功能试验Test function Monthly 4/E √ √ √ √ √ √ √ √ √ √ √ √
5. 电气设备Electric Equipment
编号 维护养护项目 检查维护内容 间隔期 上次检修时间 责任人 1月 2月 3月 4月 5月 6月 7月 8月 9月 10月 11月 12月 备注
No. Maintenance Items Inspection & Maintenance Contents Interval Last maintenance time PIC JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC Remarks
测量绝缘、清洗滤网、检查滑环 三个月
Check insulation, clean filter, check slide ring 3 months E/E √ √ √ √
发电机
501 Generator
检查定子绕组,清洗部件并烘干,转子清洁
Check stator, clean and bake in varnish, clean
NO
10000h E/E
rotor FIXED
三个月
清洗除尘紧固各部位螺丝Clean, check all bolts
3 months E/E √ √ √ √
主配电版
502 Main switchboard
做逆功、过载、欠压试验 两年半 NO
Reverse power, overload, under voltage test 2.5 years E/E
FIXED
应急发电机及配电
版Emergency 检查原动机状况进行起动并电试验
Check mover engine and do start, parallel 每月
503 generator and Monthly E/E √ √ √ √ √ √ √ √ √ √ √ √
connection test
switchboard
备用电箱 三个月
504 Stand by control box 功能试验Test function 3 months E/E √ √ √ √
舵机电动机
测量绝缘检查温度 三个月
505 Steering gear electric Measure insulation, check temperature 3 months E/E √ √ √ √
motor
舵机控制箱
三个月
506 Steering gear control 清洁检查Clean, check 3 months E/E √ √ √ √
box
电路连接、照明系
统、控制电压、应
急停止开关、按钮
、控制灯、接触器
、时间继电器、过
载继电器、滑环、
吊货、升降、回转
限位 检查是否松脱 ,保持照明良好各部件工作处
Cable 于良好状态,如有失常及时修复
509 connection,lighting Check if slacken,keep lighting in order,All part 三个月 E/E √ √ √ √
system,emergency in good order, repaired timely if found out of 3 months
stop switch,push order.
button, control
lamp,contactor,ti
me relay,overload
relay, slide
ring,hoist and
Slewing limit switch
通用泵电动机及控
制箱 测绝缘检查温度及运转情况
510 General pump Measure insulation, check temperature & running 三个月 E/E
electric motor and performance 3 months
control box
压载泵电动机及控
制箱 测绝缘检查温度及运转情况
三个月
511 Ballast pump electric Measure insulation, check temp and running 3 months E/E
motor and control performance
box
循环水泵电动机及
控制箱 测绝缘检查温度及运转情况
三个月
512 Circulation pump Measure insulation, check temp and running
3 months E/E
electric motor and performance
control box
油头冷却水泵电动
机及控制箱 测绝缘检查温度及运转情况
三个月
513 F.V cooling pump Measure insulation, check temp and running 3 months E/E √ √ √ √
electric motor and performance
control box
燃油驳运泵电动机
及控制箱 测绝缘检查温度及运转情况
三个月
514 F.O trans pump Measure insulation, check temp and running
3 months E/E √ √ √ √
electric motor and performance
control box
主滑油泵电动机及
控制箱
Main L.O pump 测绝缘检查温度及运转情况
三个月
515 electric motor and Measure insulation, check temp and running 3 months E/E √ √ √ √
control box performance
锅炉燃油泵和给水
泵及控制箱
Boiler F.O pump and 测绝缘检查温度及运转情况
三个月
516 feed pump electric Measure insulation, check temp and running 3 months E/E √ √ √ √
motor and control performance
box
空压机净油机电动 测绝缘检查温度及运转情况
机及控制箱 Measure insulation, check temp and running
Compressor, purifier performance 三个月
517 electric motor and 3 months E/E √ √ √ √
control box
畜电池 测量比重检查蒸馏水,根据检测情况补充蒸
每月
518 Accumulator 馏水Measure density and check distilled water,
Monthly E/E √ √ √ √ √ √ √ √ √ √ √ √
refill if necessary
救生艇及舷梯电动
机及控制箱 测绝缘检查温度及运转情况
Lifeboat, gangway Measure insulation, check temp and running 三个月
520 3 months E/E √ √ √ √
electric motor and performance
control box
车床钻床砂轮行车
电动机及控制箱 测绝缘检查温度及运转情况
六个月
521 Lathe, grinder Measure insulation, check temp and running
6 months E/E √ √
electric motor and performance
control box
电网、线路、变压
器、变流机
测绝缘检查温度及运转情况 三个月
522 Power network, Measure insulation, check running performance 3 months E/E √ √ √ √
cable, transformer,
converter
主机遥控(电动)
装置 三个月
523 M/E remote control 测试、保养Test, maintenance 3 months E/E √ √ √ √
device
各种机舱指示灯 检查、测绝缘、损坏灯泡换新
三个月
524 All kind of r/m Check, measure insulation renew lamp if found
3 months E/E √ √ √ √
indicating lamp damage
室内外照明电路(
包括插座、开关、
照明灯、强光灯)
Cabin inside and 检查、测绝缘、修理 三个月
525 outside lighting Check, measure insulation, repair 3 months E/E √ √ √ √
system (socket,
switch, lighting,
strong lighting)
系统滤器,清洗更换滤网根据泵真空而定 每月
604 Monthly 4/E √ √ √ √ √ √ √ √ √ √ √ √
System filter ,clean, renew filter if necessary
滤油设备拆解清洁,清洗或更换过滤元件和
吸附材料 三个月
605 Oil filter equipment ,dismantle, clean or renew 3 months 4/E √ √ √ √
filter element & absorb material
油水分离器 电气控制箱,检查测量试验调整包括控制箱上
Oily Separator 的开关指示及缆线 三个月
606 Control box ,check, measure and test switch and 3 months 4/E √ √ √ √
cable in control box
每月
607 检查测试电磁阀Check, test solenoid valve
Monthly 4/E √ √ √ √ √ √ √ √ √ √ √ √
检查,调整,测试各种指示报警装置
Check, adjustment, test all kind of indicating 每月
608 Monthly 4/E √ √ √ √ √ √ √ √ √ √ √ √
device
打开粪便柜检查曝气室活性污泥浓度,补充
消毒剂 三个月
609 Open and check sewage tank internal , refill 3 months 4/E √ √ √ √
chemical content if needed
粪便柜
Sewage water 检查管系阀件密封、清洁阀件 三个月
610 Check piping, valves no leakage, clean valve 3 months 4/E √ √ √ √
disposal device
检查、清洁、测试粉碎泵,排出泵风机
每月
611 Check, clean and test crush pump, discharging
Monthly 4/E √ √ √ √ √ √ √ √ √ √ √ √
pump and ventilation fan
三个月
612 打开检查焚烧炉Open and check incinerator 3 months 4/E √ √ √ √
检查清洗废渣滤器 三个月
613 Check, cleaning waste residue filte 3 months 4/E √ √ √ √
拆解 检查 清洁 测量调整燃烧器
614 Dismantle, check, clean, measure and adjustment 三个月 4/E √ √ √ √
3 months
焚烧炉 burner
Incinerator
清洁、检查废油柜Clean and check waste oil 每年
615 Annually 4/E √
tank
检查、清洁、测试废油泵风机 每月
616 Check, clean, test waste oil pump, fan machine monthly 4/E √ √ √ √ √ √ √ √ √ √ √ √
防污材料
每月
619 Pollution prevention 检查、清点Check, clean and amount Monthly 4/E √ √ √ √
material
7. 管系和阀件Piping and Valves
编号 维护养护项目 检查维护内容 间隔期 上次检修时间 责任人 1月 2月 3月 4月 5月 6月 7月 8月 9月 10月 11月 12月 备注
No. Maintenance Items Inspection & Maintenance Contents Interval Last maintenance time PIC JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC Remarks
IN
海底伐 拆检、研磨、试压、装复 两年半
701 Sea valve Dismantle, lapping, test, assembly 2.5 years 4/E SHIPYA
RD
IN
海水管系中间阀 打开、检查、研磨、损坏阀修理或换新 两年半
703 Intermediate valve Open, check, lap and renew if damage 2.5 years 4/E SHIPYA
RD
蒸汽管、回汽管、
凝水管、阀
Steam pipe, steam 检查、损坏处换新、包扎、更换阀盘更 六个月
704 return pipe, Check, renew if found damage, packing, renew 4/E √ √
6 months
valve seal packing if found leakage
coagulated water
pipe, valve
压缩空气管、阀
检查、损坏处修理Check, repair if found 六个月
705 Compressed air pipe 6 months 3/E √ √
& valve damage
燃油管及空气管管
头、测量管
检查、损坏处换新 三个月
706 F.O pipe, air vent Check, renew if found damage 3 months 3/E √ √ √ √
head, F.O sounding
pipe
燃油管及空气管管
头、测量管
检查、损坏处换新 三个月
707 L.O pipe, air vent 3/E √ √ √ √
head, L.O sounding Check, renew if found damage 3 months
pipe
打开、研磨、试压附属阀件 两年
802 Open, lap, test mounting valve 2 years 4/E √
拆检、研磨、调试安全阀 两年
803 Dismantle, lap, test safety valve 2 years 4/E √
检查、调整燃烧器 每月
804 Check, adjustment burner Monthly 4/E √ √ √ √ √ √ √ √ √ √ √ √
辅锅炉
Aux Boiler 检查、调整控制系统 三个月
805 Inspection, adjustment control system 3 months 4/E √ √ √ √
清洗燃油管系滤器 每月
806 Clean F.O piping filter Monthly 4/E √ √ √ √ √ √ √ √ √ √ √ √
水质化验、投药、冲洗水位计
Water quality test, fill chemical, flush water level 每天 4/E √ √ √ √ √ √ √ √ √ √ √ √
Every day
gauge
807
水质上、下排污 每周
Water quality discharging dirt from up and down Weekly 4/E √ √ √ √ √ √ √ √ √ √ √ √
两年
化学清洗水腔Chemical cleaning water chamber 2 years 4/E √
废气锅炉
808 Exh boiler
每天
烟腔吹灰Smoke chamber blow ash Every day 4/E √ √ √ √ √ √ √ √ √ √ √ √
缸头检查、高、低压吸排阀研磨
Cylinder cover check high and low pressure 三个月
809 3 months 3/E √ √ √ √
suction & discharging valve
冷却水腔检查、清洁 三个月
810 Cooling water chamber check, clean 3 months 3/E √ √ √ √
主空压机 安全阀、止回阀检查、研磨、压力调整
Relief valve, non-return valve check, lap, adjust 三个月
811 Main Compressor 3 months 3/E √ √ √ √
pressure
自动控制系统压力开关、泄放阀检查调整
Control system check adjust pressure switch, 六个月
812 6 months 3/E √ √
drain valve
三个月
813 曲柄箱打开、检查Crank case open & check
3 months 3/E √ √ √ √
打开、检查、更换磨损部件 两年半
820 给水泵 Open, check, renew worn parts 2.5 years 4/E √
Daily feed water
六个月
821 pump 滤器清洗Clean filter 6 months 4/E √ √
压载泵、通用泵、 打开、检查、更换磨损部件 每年
822 消防泵 Open, check, renew worn parts Annually 4/E √
Ballast pump,
general pump, fire 六个月
823 更换盘更Renew packing 6 months 4/E √ √
pump
压缩机活塞、气缸打开、拆检、测量、更换
磨损部件 五年 NO
824 Compressor piston & cyl open, disassemble, 5 years 2/E
FIXED
measure renew worn parts
吸、排阀拆检、研磨、更换磨损部件
Suction, discharging valve disassemble, lap, 两年
825 空调冰机 2 years 2/E √
Air con, Refrigerant renew parts if found damage
Device 曲柄箱打开、检查、更换滑油 两年
826 Crank case open, check, renew L.O 2 years 2/E √
六个月
827 冷却器打开、清洁Cooler open, clean 6 months 2/E √ √
制冷系统更换干燥剂 三个月
828 Refrigerant System renew drier 3 months 2/E √ √ √ √
伙食冰机
检查制冷管路、蒸发器漏泄等 每月
829 Provision refrigerant Check system piping, evaporator for leakage Monthly 2/E √ √ √ √ √ √ √ √ √ √ √ √
device
集控室空调机
检查制冷管路、蒸发器漏泄等 每月
830 E/R control room air Check system piping, evaporator for leakage Monthly 2/E √ √ √ √ √ √ √ √ √ √ √ √
condition
主机燃油日用/沉淀
两年半
831 柜M/E F.O 检查、清洁check, clean 2.5 years 3/E √
service/settle tank
付机日用/沉淀柜
两年半
832 A/E service/settle 检查、清洁Check, clean
2.5 years 3/E √
tank
辅锅炉日用柜
两年半
833 Auxiliary Boiler 检查、清洁Check, clean 2.5 years 3/E √
service tank
9. 机舱舱室Engine Room
编号 维护养护项目 检查维护内容 间隔期 上次检修时间 责任人 1月 2月 3月 4月 5月 6月 7月 8月 9月 10月 11月 12月 备注
No. Maintenance Items Inspection & Maintenance Contents Interval Last maintenance time PIC JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC Remarks
每月
清洁Clean Monthly 2/E √ √ √ √ √ √ √ √ √ √ √ √
梯道、栏杆、地板
901 Ladder, rail, floor 每半年
除锈、油漆Derust, painting Half a 2/E √ √
year
工具间、物料间、
车床间、电气焊间
每月
902 Tool room, store 整理、清洁Clear up, clean Monthly 2/E
room, lathe room,
welding room
空调间 每月
903 Air condition room 清洁Clean Monthly 2/E
舵机间、冷藏机间
、、打风机间
每月
904 Steering gear room, 清洁Clean Monthly 2/E
refrigerant room,
vent machine room
门窗、风筒
每月
905 Door, window, vent 清洁Clean Monthly 2/E
pipe
压缩机电压及马达
轴心线 检查电压及马达轴的震动 三个月
1002 Compressor’s volt Tension and vibration of motor shaft 3 months 2/E
and center
压缩机总体 拆检Overhaul & Check 每年
1003 Compressure general Annually 2/E
冷凝器 疏通、检查锈蚀,更换锌块(如需要)
三个月
1004 Condenser Dredge, check corrosion condition, and renew
3 months 2/E
zinc plate(if need)
安全阀 泄漏/功能检查 每年
1010 Safety valves Check leakage/action Annually 2/E
压力表、水位计、 检查指示器、清洁污渍、密封调整
停止阀 Indication, contamination cleaning, tighten 每月
1011 Pressure gauge, level packing Monthly 2/E
gauge, stop valve
高低压开关 检查设定值和动作
三个月
1020 High(low) pressure Check set-value and action 3 months 2/E
switch
温度计、压力表 检查指示误差
Thermometer, Check indication error 三个月
1021 3 months 2/E
pressure gauge
安全阀 检查工作压力 每年
1022 Safety valve Check working pressure Annually 2/E
周期性拆检:活塞 检查活动配件组合及其运转(取出活塞检查
销、活塞销轴承 针轴承)
Periodical Check play at assembled state and their
1023 overhaul:Piston pin, working(take out piston and check needle 10000h 2/E
piston pin bearing bearings)
检查阀片、阀座的磨损,安全端弹簧高度,
周期性拆检:进排 更换气阀弹簧; 检查活塞及活塞环的磨损及
气阀;活塞及活塞 积碳,曲柄销的磨损。
环、曲柄销轴承、 Check injury and wear of valve plate and valve
气缸体、曲轴 seat, height of safety head spring; change valve 5000小时
Periodical spring; check wear, roughness, injury and carbon /每年
1024 overhaul:discharge adhered;check wear and roughness of crank pin 2/E
5000h/
& suction valve; annually
Piston, piston ring,
piston pin and piston
pin bearing
检查磨损情况,视情况换新。
曲柄部分拆检:前 Check wear, roughness and injury. To be
端轴承、后端轴承 replaced if possible。
、机器密封、油泵
Overhaul journal
1025 part:front bearing, 15000h 2/E
rear bearing,
mechanical seal, oil
pump
11. 其他Others
编号 维护养护项目 检查维护内容 间隔期 上次检修时间 责任人 1月 2月 3月 4月 5月 6月 7月 8月 9月 10月 11月 12月 备注
No. Maintenance Items Inspection & Maintenance Contents Interval Last maintenance time PIC JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC Remarks
M/V
2023 年 度 甲 板 部
M/V
2023 年 度 轮 机 部