working principle of zener diode, symbol , as voltage regulator Introduction to Zener Diode
Zener Diode is a type of diode that
operates in the reverse breakdown region. It is used as a voltage regulator in electronic circuits. This presentation will explain the working principle of zener diode and its symbol. Working Principle of Zener When Diode a zener diode is connected in reverse bias, it allows current to flow in reverse direction when the voltage reaches the zener voltage. This voltage remains constant irrespective of the current flowing through it. Thus, it acts as a voltage regulator. Reverse Breakdown Region
The reverse breakdown region is the
region in which the zener diode operates. In this region, the diode allows a large amount of current to flow in the reverse direction. This region is achieved when a voltage greater than the zener voltage is applied to the diode. Symbol of Zener Diode
The symbol of a zener diode is similar to a normal
diode, with the addition of two arrows pointing towards each other. These arrows indicate that the diode can operate in both forward and reverse bias. Applications of Zener Diode
Zener diodes are used as voltage
regulators in electronic circuits. They are also used in voltage reference circuits, overvoltage protection circuits, and as noise generators in electronic equipment. Conclusion Zener diodes are an important component in electronic circuits. They allow for precise voltage regulation and protection against overvoltage. Understanding the working principle and symbol of zener diode is essential for any electronics engineer. Thanks! Do you have any questions? addyouremail@freepik.com +91 620 421 838 yourcompany.com